talos-op-linux/drivers/gpu/drm/bridge/adv7511, branch master

Merge tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm

2019-09-27T18:13:35+00:00

Pull drm fixes from Dave Airlie: "Fixes built up over the past 1.5 weeks or so, it's two weeks of amdgpu, some core cleanups and some panfrost fixes. I also finally figured out why my desktop was slow to do a bunch of stuff (someone gave it an IPv6 address which can't reach anything!). core: - Some cleanups and fixes in the self-refresh helpers - Some cleanups and fixes in the atomic helpers amdgpu: - Fix a 64 bit divide - Prevent a memory leak in a failure case in dc - Load proper gfx firmware on navi14 variants - Add more navi12 and navi14 PCI ids - Misc fixes for renoir - Fix bandwidth issues with multiple displays on vega20 - Support for Dali - Fix a possible oops with KFD on hawaii - Fix for backlight level after resume on some APUs - Other misc fixes panfrost: - Multiple panfrost fixes for regulator support and page fault handling" * tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/amd/display: prevent memory leak drm/amdgpu/gfx10: add support for wks firmware loading drm/amdgpu/display: include slab.h in dcn21_resource.c drm/amdgpu/display: fix 64 bit divide drm/panfrost: Prevent race when handling page fault drm/panfrost: Remove NULL checks for regulator drm/panfrost: Fix regulator_get_optional() misuse drm: Measure Self Refresh Entry/Exit times to avoid thrashing drm: Fix kerneldoc and remove unused struct member in self_refresh helper drm/atomic: Rename crtc_state->pageflip_flags to async_flip drm/atomic: Reject FLIP_ASYNC unconditionally drm/atomic: Take the atomic toys away from X drm/amdgpu: flag navi12 and 14 as experimental for 5.4 drm/kms: Duct-tape for mode object lifetime checks drm/amdgpu: add navi12 pci id drm/amdgpu: add navi14 PCI ID for work station SKU drm/amdkfd: Swap trap temporary registers in gfx10 trap handler drm/amd/powerplay: implement sysfs for getting dpm clock drm/amd/display: Restore backlight brightness after system resume drm/amd/display: Implement voltage limitation for dali ...

Merge branch 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2019-09-24T23:48:02+00:00

Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...

Revert "drm/bridge: adv7511: Attach to DSI host at probe time"

2019-09-13T07:25:00+00:00

This reverts commit 83f35bc3a852f1c3892c7474998c5cec707c7ba3. There are at least two DSI controller drivers which relies on the old behaviour of adv7511 driver. To avoid platform breakage this patch should be reverted. This is a temporary solution, as it blocks adv7511 usage with other platforms. Assumption that DSI device driver (bridge/panel) should first expose drm_bridge/drm_panel object, then look for DSI bus is just incorrect - it can work with devices controlled via i2c but it cannot work with devices controlled via DSI - they will not be able to probe. To solve the issue following steps should be performed: - rework reverted patch allowing co-operation with broken DSI controller drivers - with simple/ugly workaround, - fix controller drivers and then remove workaround. Signed-off-by: Rob Clark [a.hajda: changed commit message] Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190829180836.14453-1-robdclark@gmail.com

i2c: replace i2c_new_secondary_device with an ERR_PTR variant

2019-08-14T12:54:55+00:00

In the general move to have i2c_new_*_device functions which return ERR_PTR instead of NULL, this patch converts i2c_new_secondary_device(). There are only few users, so this patch converts the I2C core and all users in one go. The function gets renamed to i2c_new_ancillary_device() so out-of-tree users will get a build failure to understand they need to adapt their error checking code. Signed-off-by: Wolfram Sang Reviewed-by: Kieran Bingham # adv748x Reviewed-by: Laurent Pinchart # adv7511 + adv7604 Reviewed-by: Hans Verkuil # adv7604 Signed-off-by: Wolfram Sang

drm/bridge: adv7511: Attach to DSI host at probe time

2019-07-01T10:29:15+00:00

In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel which attach to the DSI host via mipi_dsi_attach() at probe time, the ADV7533 bridge device does not. Instead it defers this to the point that the upstream device connects to its bridge via drm_bridge_attach(). The generic Synopsys MIPI DSI host driver does not register it's own drm_bridge until the MIPI DSI has attached. But it does not call drm_bridge_attach() on the downstream device until the upstream device has attached. This leads to a chicken and the egg failure and the DRM pipeline does not complete. Since all other mipi_dsi_device drivers call mipi_dsi_attach() in probe(), make the adv7533 mipi_dsi_device do the same. This ensures that the Synopsys MIPI DSI host registers it's bridge such that it is available for the upstream device to connect to. Signed-off-by: Matt Redfearn Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190627151740.2277-1-matt.redfearn@thinci.com

Merge v5.2-rc5 into drm-next

2019-06-19T10:07:29+00:00

Maarten needs -rc4 backmerged so he can pull in the fbcon notifier removal topic branch into drm-misc-next. Signed-off-by: Daniel Vetter

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284

2019-06-05T15:36:37+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177

2019-05-30T18:29:19+00:00

Based on 1 normalized pattern(s): licensed under the gpl 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Alexios Zavras Reviewed-by: Steve Winslow Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

2019-05-28T07:39:08+00:00

This picks up rc2 for us as well. Signed-off-by: Maarten Lankhorst

drm/bridge: drop drmP.h usage

2019-05-26T08:55:04+00:00

Drop use of the deprecated drmP.h header file. While touching the list of include files: - Divide include files in blocks of linux/* drm/* etc. - Sort individual blocks of include files - Remove duplicated header file v2: - Be consistent in the order of the include blocks (Laurent) Signed-off-by: Sam Ravnborg Reviewed-by: Laurent Pinchart Cc: Andrzej Hajda Cc: David Airlie Cc: Daniel Vetter Cc: Peter Senna Tschudin Cc: Martin Donnelly Cc: Martyn Welch Link: https://patchwork.freedesktop.org/patch/msgid/20190519183636.19588-1-sam@ravnborg.org