talos-op-linux/drivers/firmware, branch master

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T22:04:19+00:00

Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...

Merge branch 'akpm' (patches from Andrew)

2020-02-04T07:24:48+00:00

Merge more updates from Andrew Morton: "The rest of MM and the rest of everything else: hotfixes, ipc, misc, procfs, lib, cleanups, arm" * emailed patches from Andrew Morton : (67 commits) ARM: dma-api: fix max_pfn off-by-one error in __dma_supported() treewide: remove redundant IS_ERR() before error code check include/linux/cpumask.h: don't calculate length of the input string lib: new testcases for bitmap_parse{_user} lib: rework bitmap_parse() lib: make bitmap_parse_user a wrapper on bitmap_parse lib: add test for bitmap_parse() bitops: more BITS_TO_* macros lib/string: add strnchrnul() proc: convert everything to "struct proc_ops" proc: decouple proc from VFS with "struct proc_ops" asm-generic/tlb: provide MMU_GATHER_TABLE_FREE asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE asm-generic/tlb: rename HAVE_RCU_TABLE_FREE asm-generic/tlb: add missing CONFIG symbol asm-gemeric/tlb: remove stray function declarations asm-generic/tlb: avoid potential double flush mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case ...

arm64: mm: convert mm/dump.c to use walk_page_range()

2020-02-04T03:05:25+00:00

Now walk_page_range() can walk kernel page tables, we can switch the arm64 ptdump code over to using it, simplifying the code. Link: http://lkml.kernel.org/r/20191218162402.45610-22-steven.price@arm.com Signed-off-by: Steven Price Reviewed-by: Catalin Marinas Cc: Albert Ou Cc: Alexandre Ghiti Cc: Andy Lutomirski Cc: Ard Biesheuvel Cc: Arnd Bergmann Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Christian Borntraeger Cc: Dave Hansen Cc: David S. Miller Cc: Heiko Carstens Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: James Hogan Cc: James Morse Cc: Jerome Glisse Cc: "Liang, Kan" Cc: Mark Rutland Cc: Michael Ellerman Cc: Paul Burton Cc: Paul Mackerras Cc: Paul Walmsley Cc: Peter Zijlstra Cc: Ralf Baechle Cc: Russell King Cc: Thomas Gleixner Cc: Vasily Gorbik Cc: Vineet Gupta Cc: Will Deacon Cc: Zong Li Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'stable/for-linus-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft

2020-02-03T22:25:27+00:00

Pull ibft update from Konrad Rzeszutek Wilk: "Adhere to the iBFT spec and extend the structure to handle more than two NICs" * 'stable/for-linus-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: iscsi_ibft: Don't limits Targets and NICs to two

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-02-03T22:10:18+00:00

Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...

Merge tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-01-29T18:35:54+00:00

Pull char/misc driver updates from Greg KH: "Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits) mei: me: add jasper point DID char: hpet: Use flexible-array member binder: fix log spam for existing debugfs file creation. mei: me: add comet point (lake) H device ids nvmem: add QTI SDAM driver dt-bindings: nvmem: add binding for QTI SPMI SDAM dt-bindings: imx-ocotp: Add i.MX8MP compatible dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver siox: Use the correct style for SPDX License Identifier w1: omap-hdq: Simplify driver with PM runtime autosuspend firmware: stratix10-svc: Remove unneeded semicolon firmware: google: Probe for a GSMI handler in firmware firmware: google: Unregister driver_info on failure and exit in gsmi firmware: google: Release devices before unregistering the bus slimbus: qcom: add missed clk_disable_unprepare in remove slimbus: Use the correct style for SPDX License Identifier slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel() dt-bindings: SLIMBus: add slim devices optional properties ...

Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-01-28T17:03:40+00:00

Pull EFI updates from Ingo Molnar: "The main changes in this cycle were: - Cleanup of the GOP [graphics output] handling code in the EFI stub - Complete refactoring of the mixed mode handling in the x86 EFI stub - Overhaul of the x86 EFI boot/runtime code - Increase robustness for mixed mode code - Add the ability to disable DMA at the root port level in the EFI stub - Get rid of RWX mappings in the EFI memory map and page tables, where possible - Move the support code for the old EFI memory mapping style into its only user, the SGI UV1+ support code. - plus misc fixes, updates, smaller cleanups. ... and due to interactions with the RWX changes, another round of PAT cleanups make a guest appearance via the EFI tree - with no side effects intended" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) efi/x86: Disable instrumentation in the EFI runtime handling code efi/libstub/x86: Fix EFI server boot failure efi/x86: Disallow efi=old_map in mixed mode x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping efi: Fix handling of multiple efi_fake_mem= entries efi: Fix efi_memmap_alloc() leaks efi: Add tracking for dynamically allocated memmaps efi: Add a flags parameter to efi_memory_map efi: Fix comment for efi_mem_type() wrt absent physical addresses efi/arm: Defer probe of PCIe backed efifb on DT systems efi/x86: Limit EFI old memory map to SGI UV machines efi/x86: Avoid RWX mappings for all of DRAM efi/x86: Don't map the entire kernel text RW for mixed mode x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd efi/libstub/x86: Fix unused-variable warning efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode efi/libstub/x86: Use const attribute for efi_is_64bit() efi: Allow disabling PCI busmastering on bridges during boot efi/x86: Allow translating 64-bit arguments for mixed mode calls ...

Merge branch 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-01-28T16:20:54+00:00

Pull header cleanup from Ingo Molnar: "This is a treewide cleanup, mostly (but not exclusively) with x86 impact, which breaks implicit dependencies on the asm/realtime.h header and finally removes it from asm/acpi.h" * 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ACPI/sleep: Move acpi_get_wakeup_address() into sleep.c, remove from ACPI/sleep: Convert acpi_wakeup_address into a function x86/ACPI/sleep: Remove an unnecessary include of asm/realmode.h ASoC: Intel: Skylake: Explicitly include linux/io.h for virt_to_phys() vmw_balloon: Explicitly include linux/io.h for virt_to_phys() virt: vbox: Explicitly include linux/io.h to pick up various defs efi/capsule-loader: Explicitly include linux/io.h for page_to_phys() perf/x86/intel: Explicitly include asm/io.h to use virt_to_phys() x86/kprobes: Explicitly include vmalloc.h for set_vm_flush_reset_perms() x86/ftrace: Explicitly include vmalloc.h for set_vm_flush_reset_perms() x86/boot: Explicitly include realmode.h to handle RM reservations x86/efi: Explicitly include realmode.h to handle RM trampoline quirk x86/platform/intel/quark: Explicitly include linux/io.h for virt_to_phys() x86/setup: Enhance the comments x86/setup: Clean up the header portion of setup.c

Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap

2020-01-27T21:03:00+00:00

Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap

clk: zynqmp: Warn user if clock user are more than allowed

2020-01-23T21:25:25+00:00

Warn user if clock is used by more than allowed devices. This check is done by firmware and returns respective error code. Upon receiving error code for excessive user, warn user for the same. This change is done to restrict VPLL use count. It is assumed that VPLL is used by one user only. Signed-off-by: Michal Simek Signed-off-by: Rajan Vaja Link: https://lkml.kernel.org/r/1575527759-26452-4-git-send-email-rajan.vaja@xilinx.com Acked-by: Michal Simek Signed-off-by: Stephen Boyd