talos-op-linux/drivers/firmware/Makefile, branch master

firmware: qcom_scm: Dynamically support SMCCC and legacy conventions

2020-01-08T06:14:43+00:00

Dynamically support SMCCCC and legacy conventions by detecting which convention to use at runtime. qcom_scm_call_atomic and qcom_scm_call can then be moved in qcom_scm.c and use underlying convention backend as appropriate. Thus, rename qcom_scm-64,-32 to reflect that they are backends for -smc and -legacy, respectively. Also add support for making SCM calls earlier than when SCM driver probes to support use cases such as qcom_scm_set_cold_boot_addr. Support is added by lazily initializing the convention and guarding the query with a spin lock. The limitation of these early SCM calls is that they cannot use DMA, as in the case of >4 arguments for SMC convention and any non-atomic call for legacy convention. Tested-by: Brian Masney # arm32 Tested-by: Stephan Gerhold Signed-off-by: Elliot Berman Link: https://lore.kernel.org/r/1578431066-19600-18-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson

firmware: qcom_scm-32: Use SMC arch wrappers

2020-01-08T06:14:22+00:00

Use SMC arch wrappers instead of inline assembly. Tested-by: Brian Masney # arm32 Tested-by: Stephan Gerhold Signed-off-by: Elliot Berman Link: https://lore.kernel.org/r/1578431066-19600-10-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson

Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2019-09-18T18:14:31+00:00

Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...

firmware: Add Turris Mox rWTM firmware driver

2019-09-04T15:32:13+00:00

This adds a driver to communicate with the firmware running on the secure processor of the Turris Mox router, enabling the kernel to retrieve true random numbers from the Entropy Bit Generator and to read some information burned into eFuses when device was manufactured: and to sign messages with the ECDSA private key burned into each Turris Mox device when manufacturing. This also adds support to read other information burned into eFuses: - serial number - board version - MAC addresses - RAM size - ECDSA public key (this is not read directly from eFuses, rather it is computed by the firmware as pair to the burned private key) The source code of the firmware is open source and can be found at https://gitlab.labs.nic.cz/turris/mox-boot-builder/tree/master/wtmi The firmware is also able to, on demand, sign messages with the burned ECDSA private key, but since Linux's akcipher API is not yet stable (and therefore not exposed to userspace via netlink), this functionality is not supported yet. Link: https://lore.kernel.org/r/20190822014318.19478-3-marek.behun@nic.cz Signed-off-by: Marek Behún Signed-off-by: Arnd Bergmann

firmware: add Intel Stratix10 remote system update driver

2019-09-04T11:31:28+00:00

The Intel Remote System Update (RSU) driver exposes interfaces access through the Intel Service Layer to user space via sysfs interface. The RSU interfaces report and control some of the optional RSU features on Intel Stratix 10 SoC. The RSU feature provides a way for customers to update the boot configuration of a Intel Stratix 10 SoC device with significantly reduced risk of corrupting the bitstream storage and bricking the system. Signed-off-by: Richard Gong Reviewed-by: Alan Tull Link: https://lore.kernel.org/r/1567516701-26026-3-git-send-email-richard.gong@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-05-16T15:31:32+00:00

Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...

firmware: Move Trusted Foundations support

2019-04-17T14:43:03+00:00

Move the Trusted Foundations support out of arch/arm/firmware and into drivers/firmware where most other firmware support implementations are located. Signed-off-by: Thierry Reding

drivers: firmware: psci: Move psci to separate directory

2019-04-12T08:59:37+00:00

Some following changes extends the PSCI driver with some additional files. Avoid to continue cluttering the toplevel firmware directory and first move the PSCI files into a PSCI sub-directory. Suggested-by: Mark Rutland Signed-off-by: Ulf Hansson Acked-by: Daniel Lezcano Acked-by: Mark Rutland Acked-by: Lorenzo Pieralisi Signed-off-by: Rafael J. Wysocki

firmware: add Intel Stratix10 service layer driver

2018-11-26T19:13:50+00:00

Some features of the Intel Stratix10 SoC require a level of privilege higher than the kernel is granted. Such secure features include FPGA programming. In terms of the ARMv8 architecture, the kernel runs at Exception Level 1 (EL1), access to the features requires Exception Level 3 (EL3). The Intel Stratix10 SoC service layer provides an in kernel API for drivers to request access to the secure features. The requests are queued and processed one by one. ARM’s SMCCC is used to pass the execution of the requests on to a secure monitor (EL3). The header file stratix10-sve-client.h defines the interface between service providers (FPGA manager is one of them) and service layer. The header file stratix10-smc.h defines the secure monitor call (SMC) message protocols used for service layer driver in normal world (EL1) to communicate with secure monitor SW in secure monitor exception level 3 (EL3). Signed-off-by: Richard Gong Signed-off-by: Alan Tull Signed-off-by: Greg Kroah-Hartman

Merge tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86

2018-11-01T15:42:21+00:00

Pull x86 platform driver updates from Darren Hart: - Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86 as they are closely coupled with other drivers in this location. - Improve _init* usage for acerhdf and fix some usage issues with messages and module parameters. - Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating workqueue overhead, eliminate double reporting of keyboard backlight. - Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio). - Notify intel_telemetry users when IPC1 device is not enabled. - Update various drivers with new laptop model IDs. - Update several intel drivers to use SPDX identifers and order headers alphabetically. * tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits) HID: asus: only support backlight when it's not driven by WMI platform/x86: asus-wmi: export function for evaluating WMI methods platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed platform/x86: wmi: declare device_type structure as constant platform/x86: ideapad: Add Y530-15ICH to no_hw_rfkill platform/x86: Add Intel AtomISP2 dummy / power-management driver platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet platform/x86: intel_telemetry: Get rid of custom macro platform/x86: intel_telemetry: report debugfs failure MAINTAINERS: intel_telemetry: Update maintainers info platform/x86: Add LG Gram laptop special features driver platform/x86: asus-wmi: Simplify the keyboard brightness updating process platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items MAINTAINERS: intel_pmc_core: Update MAINTAINERS firmware: dcdbas: include linux/io.h platform/x86: intel-wmi-thunderbolt: Add dynamic debugging platform/x86: intel-wmi-thunderbolt: Convert to use SPDX identifier ...