talos-op-linux/arch/x86/math-emu, branch master

Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-11-26T18:42:40+00:00

Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - Cross-arch changes to move the linker sections for NOTES and EXCEPTION_TABLE into the RO_DATA area, where they belong on most architectures. (Kees Cook) - Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to trap jumps into the middle of those padding areas instead of sliding execution. (Kees Cook) - A thorough cleanup of symbol definitions within x86 assembler code. The rather randomly named macros got streamlined around a (hopefully) straightforward naming scheme: SYM_START(name, linkage, align...) SYM_END(name, sym_type) SYM_FUNC_START(name) SYM_FUNC_END(name) SYM_CODE_START(name) SYM_CODE_END(name) SYM_DATA_START(name) SYM_DATA_END(name) etc - with about three times of these basic primitives with some label, local symbol or attribute variant, expressed via postfixes. No change in functionality intended. (Jiri Slaby) - Misc other changes, cleanups and smaller fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits) x86/entry/64: Remove pointless jump in paranoid_exit x86/entry/32: Remove unused resume_userspace label x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o m68k: Convert missed RODATA to RO_DATA x86/vmlinux: Use INT3 instead of NOP for linker fill bytes x86/mm: Report actual image regions in /proc/iomem x86/mm: Report which part of kernel image is freed x86/mm: Remove redundant address-of operators on addresses xtensa: Move EXCEPTION_TABLE to RO_DATA segment powerpc: Move EXCEPTION_TABLE to RO_DATA segment parisc: Move EXCEPTION_TABLE to RO_DATA segment microblaze: Move EXCEPTION_TABLE to RO_DATA segment ia64: Move EXCEPTION_TABLE to RO_DATA segment h8300: Move EXCEPTION_TABLE to RO_DATA segment c6x: Move EXCEPTION_TABLE to RO_DATA segment arm64: Move EXCEPTION_TABLE to RO_DATA segment alpha: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Actually use _etext for the end of the text segment vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA ...

x86/asm/32: Change all ENTRY+ENDPROC to SYM_FUNC_*

2019-10-18T10:03:43+00:00

These are all functions which are invoked from elsewhere, so annotate them as global using the new SYM_FUNC_START and their ENDPROC's by SYM_FUNC_END. Now, ENTRY/ENDPROC can be forced to be undefined on X86, so do so. Signed-off-by: Jiri Slaby Signed-off-by: Borislav Petkov Cc: Allison Randal Cc: Andrey Ryabinin Cc: Andy Lutomirski Cc: Andy Shevchenko Cc: Ard Biesheuvel Cc: Bill Metzenthen Cc: Boris Ostrovsky Cc: Darren Hart Cc: "David S. Miller" Cc: Greg Kroah-Hartman Cc: Herbert Xu Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: linux-arch@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-efi Cc: linux-efi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Mark Rutland Cc: Matt Fleming Cc: Pavel Machek Cc: platform-driver-x86@vger.kernel.org Cc: "Rafael J. Wysocki" Cc: Thomas Gleixner Cc: Will Deacon Cc: x86-ml Link: https://lkml.kernel.org/r/20191011115108.12392-28-jslaby@suse.cz

x86/math-emu: Check __copy_from_user() result

2019-10-03T08:51:08+00:00

The new __must_check annotation on __copy_from_user() successfully identified some code that has lacked the check since at least linux-2.1.73: arch/x86/math-emu/reg_ld_str.c:88:2: error: ignoring return value of \ function declared with 'warn_unused_result' attribute [-Werror,-Wunused-result] __copy_from_user(sti_ptr, s, 10); ^~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~ arch/x86/math-emu/reg_ld_str.c:1129:2: error: ignoring return value of \ function declared with 'warn_unused_result' attribute [-Werror,-Wunused-result] __copy_from_user(register_base + offset, s, other); ^~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_ld_str.c:1131:3: error: ignoring return value of \ function declared with 'warn_unused_result' attribute [-Werror,-Wunused-result] __copy_from_user(register_base, s + other, offset); ^~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In addition, the get_user()/put_user() helpers do not enforce a return value check, but actually still require one. These have been missing for even longer. Change the internal wrappers around get_user()/put_user() to force a signal and add a corresponding wrapper around __copy_from_user() to check all such cases. [ bp: Break long lines. ] Fixes: 257e458057e5 ("Import 2.1.73") Fixes: 9dd819a15162 ("uaccess: add missing __must_check attributes") Signed-off-by: Arnd Bergmann Signed-off-by: Borislav Petkov Reviewed-by: Kees Cook Cc: "H. Peter Anvin" Cc: Bill Metzenthen Cc: Ingo Molnar Cc: Thomas Gleixner Cc: x86-ml Link: https://lkml.kernel.org/r/20191001142344.1274185-1-arnd@arndb.de

x86/fpu/math-emu: Address fallthrough warnings

2019-08-12T18:35:05+00:00

/home/tglx/work/kernel/linus/linux/arch/x86/math-emu/errors.c: In function ‘FPU_printall’: /home/tglx/work/kernel/linus/linux/arch/x86/math-emu/errors.c:187:9: warning: this statement may fall through [-Wimplicit-fallthrough=] tagi = FPU_Special(r); ~~~~~^~~~~~~~~~~~~~~~ /home/tglx/work/kernel/linus/linux/arch/x86/math-emu/errors.c:188:3: note: here case TAG_Valid: ^~~~ /home/tglx/work/kernel/linus/linux/arch/x86/math-emu/fpu_trig.c: In function ‘fyl2xp1’: /home/tglx/work/kernel/linus/linux/arch/x86/math-emu/fpu_trig.c:1353:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (denormal_operand() < 0) ^ /home/tglx/work/kernel/linus/linux/arch/x86/math-emu/fpu_trig.c:1356:3: note: here case TAG_Zero: Remove the pointless 'break;' after 'continue;' while at it. Signed-off-by: Thomas Gleixner

x86: math-emu: Hide clang warnings for 16-bit overflow

2019-07-16T22:42:26+00:00

clang warns about a few parts of the math-emu implementation where a 16-bit integer becomes negative during assignment: arch/x86/math-emu/poly_tan.c:88:35: error: implicit conversion from 'int' to 'short' changes value from 49216 to -16320 [-Werror,-Wconstant-conversion] (0x41 + EXTENDED_Ebias) | SIGN_Negative); ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ arch/x86/math-emu/fpu_emu.h:180:58: note: expanded from macro 'setexponent16' #define setexponent16(x,y) { (*(short *)&((x)->exp)) = (y); } ~ ^ arch/x86/math-emu/reg_constant.c:37:32: error: implicit conversion from 'int' to 'short' changes value from 49085 to -16451 [-Werror,-Wconstant-conversion] FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66, ^~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG' ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:48:28: error: implicit conversion from 'int' to 'short' changes value from 65535 to -1 [-Werror,-Wconstant-conversion] FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG' ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ The code is correct as is, so add a typecast to shut up the warnings. Signed-off-by: Arnd Bergmann Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/20190712090816.350668-1-arnd@arndb.de

x86/fpu: Always init the state in fpu__clear()

2019-04-09T17:28:06+00:00

fpu__clear() only initializes the state if the CPU has FPU support. This initialisation is also required for FPU-less systems and takes place in math_emulate(). Since fpu__initialize() only performs the initialization if ->initialized is zero it does not matter that it is invoked each time an opcode is emulated. It makes the removal of ->initialized easier if the struct is also initialized in the FPU-less case at the same time. Move fpu__initialize() before the FPU feature check so it is also performed in the FPU-less case too. [ bp: Massage a bit. ] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Borislav Petkov Reviewed-by: Borislav Petkov Reviewed-by: Dave Hansen Reviewed-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Aubrey Li Cc: Bill Metzenthen Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Jann Horn Cc: "Jason A. Donenfeld" Cc: kvm ML Cc: Nicolai Stange Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Rik van Riel Cc: x86-ml Link: https://lkml.kernel.org/r/20190403164156.19645-5-bigeasy@linutronix.de

Remove 'type' argument from access_ok() function

2019-01-04T02:57:57+00:00

Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/fpu: Rename fpu__activate_curr() to fpu__initialize()

2017-09-26T07:43:44+00:00

Rename this function to better express that it's all about initializing the FPU state of a task which goes hand in hand with the fpu::initialized field. Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: Eric Biggers Cc: Fenghua Yu Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Cc: Yu-cheng Yu Link: http://lkml.kernel.org/r/20170923130016.21448-33-mingo@kernel.org Signed-off-by: Ingo Molnar

Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-09-05T00:43:56+00:00

Pull x86 apic updates from Thomas Gleixner: "This update provides: - Cleanup of the IDT management including the removal of the extra tracing IDT. A first step to cleanup the vector management code. - The removal of the paravirt op adjust_exception_frame. This is a XEN specific issue, but merged through this branch to avoid nasty merge collisions - Prevent dmesg spam about the TSC DEADLINE bug, when the CPU has disabled the TSC DEADLINE timer in CPUID. - Adjust a debug message in the ioapic code to print out the information correctly" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) x86/idt: Fix the X86_TRAP_BP gate x86/xen: Get rid of paravirt op adjust_exception_frame x86/eisa: Add missing include x86/idt: Remove superfluous ALIGNment x86/apic: Silence "FW_BUG TSC_DEADLINE disabled due to Errata" on CPUs without the feature x86/idt: Remove the tracing IDT leftovers x86/idt: Hide set_intr_gate() x86/idt: Simplify alloc_intr_gate() x86/idt: Deinline setup functions x86/idt: Remove unused functions/inlines x86/idt: Move interrupt gate initialization to IDT code x86/idt: Move APIC gate initialization to tables x86/idt: Move regular trap init to tables x86/idt: Move IST stack based traps to table init x86/idt: Move debug stack init to table based x86/idt: Switch early trap init to IDT tables x86/idt: Prepare for table based init x86/idt: Move early IDT setup out of 32-bit asm x86/idt: Move early IDT handler setup to IDT code x86/idt: Consolidate IDT invalidation ...