talos-op-linux/arch/riscv/Kconfig, branch master

riscv: mm: add support for CONFIG_DEBUG_VIRTUAL

2020-01-23T18:40:06+00:00

This patch implements CONFIG_DEBUG_VIRTUAL to do additional checks on virt_to_phys and __pa_symbol calls. virt_to_phys used for linear mapping check, and __pa_symbol used for kernel symbol check. In current RISC-V, kernel image maps to linear mapping area. If CONFIG_DEBUG_VIRTUAL is disable, these two functions calculate the offset on the address feded directly without any checks. The result of test_debug_virtual as follows: [ 0.358456] ------------[ cut here ]------------ [ 0.358738] virt_to_phys used for non-linear address: (____ptrval____) (0xffffffd000000000) [ 0.359174] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:16 __virt_to_phys+0x3c/0x50 [ 0.359409] Modules linked in: [ 0.359630] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc3-00002-g5133c5c0ca13 #57 [ 0.359861] epc: ffffffe000253d1a ra : ffffffe000253d1a sp : ffffffe03aa87da0 [ 0.360019] gp : ffffffe000ae03b0 tp : ffffffe03aa88000 t0 : ffffffe000af2660 [ 0.360175] t1 : 0000000000000064 t2 : 00000000000000b7 s0 : ffffffe03aa87dc0 [ 0.360330] s1 : ffffffd000000000 a0 : 000000000000004f a1 : 0000000000000000 [ 0.360492] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffe000a84358 [ 0.360672] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.360876] s2 : ffffffe000ae0600 s3 : ffffffe00000fc7c s4 : ffffffe0000224b0 [ 0.361067] s5 : ffffffe000030890 s6 : ffffffe000022470 s7 : 0000000000000008 [ 0.361267] s8 : ffffffe0000002c4 s9 : ffffffe000ae0640 s10: ffffffe000ae0630 [ 0.361453] s11: 0000000000000000 t3 : 0000000000000000 t4 : 000000000001e6d0 [ 0.361636] t5 : ffffffe000ae0a18 t6 : ffffffe000aee54e [ 0.361806] status: 0000000000000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.362056] ---[ end trace aec0bf78d4978122 ]--- [ 0.362404] PA: 0xfffffff080200000 for VA: 0xffffffd000000000 [ 0.362607] PA: 0x00000000baddd2d0 for VA: 0xffffffe03abdd2d0 Signed-off-by: Zong Li Reviewed-by: Paul Walmsley Tested-by: Paul Walmsley Signed-off-by: Palmer Dabbelt

riscv: keep 32-bit kernel to 32-bit phys_addr_t

2020-01-22T21:10:01+00:00

While rv32 technically has 34-bit physical addresses, no current platforms use it and it's likely to shake out driver bugs. Let's keep 64-bit phys_addr_t off on 32-bit builds until one shows up, since other work will be needed to make such a system useful anyway. PHYS_ADDR_T_64BIT is def_bool 64BIT, so just remove the select. Signed-off-by: Olof Johansson Signed-off-by: Palmer Dabbelt

riscv: Add KASAN support

2020-01-22T21:09:58+00:00

This patch ports the feature Kernel Address SANitizer (KASAN). Note: The start address of shadow memory is at the beginning of kernel space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is 2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the shadow memory would not overlap with the fixmap area. There are currently two limitations in this port, 1. RV64 only: KASAN need large address space for extra shadow memory region. 2. KASAN can't debug the modules since the modules are allocated in VMALLOC area. We mapped the shadow memory, which corresponding to VMALLOC area, to the kasan_early_shadow_page because we don't have enough physical space for all the shadow memory corresponding to VMALLOC area. Signed-off-by: Nick Hu Reported-by: Greentime Hu Signed-off-by: Palmer Dabbelt

riscv: Implement copy_thread_tls

2020-01-07T12:31:23+00:00

This is required for clone3 which passes the TLS value through a struct rather than a register. Signed-off-by: Amanieu d'Antras Cc: linux-riscv@lists.infradead.org Cc: # 5.3.x Link: https://lore.kernel.org/r/20200102172413.654385-6-amanieu@gmail.com Signed-off-by: Christian Brauner

riscv: gcov: enable gcov for RISC-V

2020-01-03T08:47:02+00:00

This patch enables GCOV code coverage measurement on RISC-V. Lightly tested on QEMU and Hifive Unleashed board, seems to work as expected. Signed-off-by: Zong Li Reviewed-by: Anup Patel Acked-by: Jonathan Corbet Signed-off-by: Paul Walmsley

riscv: Fix use of undefined config option CONFIG_CONFIG_MMU

2019-12-20T11:32:24+00:00

In Kconfig files, config options are written without the CONFIG_ prefix. Fixes: 6bd33e1ece52 ("riscv: add nommu support") Signed-off-by: Andreas Schwab Reviewed-by: Anup Patel Signed-off-by: Paul Walmsley

Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap

2019-11-28T18:57:12+00:00

Pull generic ioremap support from Christoph Hellwig: "This adds the remaining bits for an entirely generic ioremap and iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant mess of weird ioremap variants we had with no users outside the arch code. For now just the three newest ports use the code, but there is more than a handful others that can be converted without too much work. Summary: - clean up various obsolete ioremap and iounmap variants - add a new generic ioremap implementation and switch csky, nds32 and riscv over to it" * tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits) nds32: use generic ioremap csky: use generic ioremap csky: remove ioremap_cache riscv: use the generic ioremap code lib: provide a simple generic ioremap implementation sh: remove __iounmap nios2: remove __iounmap hexagon: remove __iounmap m68k: rename __iounmap and mark it static arch: rely on asm-generic/io.h for default ioremap_* definitions asm-generic: don't provide ioremap for CONFIG_MMU asm-generic: ioremap_uc should behave the same with and without MMU xtensa: clean up ioremap x86: Clean up ioremap() parisc: remove __ioremap nios2: remove __ioremap alpha: remove the unused __ioremap wrapper hexagon: clean up ioremap ia64: rename ioremap_nocache to ioremap_uc unicore32: remove ioremap_cached ...

Merge tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2019-11-27T19:27:59+00:00

Pull RISC-V updates from Paul Walmsley: "New features: - SECCOMP support - nommu support - SBI-less system support - M-Mode support - TLB flush optimizations Other improvements: - Pass the complete RISC-V ISA string supported by the CPU cores to userspace, rather than redacting parts of it in the kernel - Add platform DMA IP block data to the HiFive Unleashed board DT file - Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image compression formats, in line with other architectures Cleanups: - Remove unnecessary PTE_PARENT_SIZE macro - Standardize include guard naming across arch/riscv" * tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits) riscv: provide a flat image loader riscv: add nommu support riscv: clear the instruction cache and all registers when booting riscv: read the hart ID from mhartid on boot riscv: provide native clint access for M-mode riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00 riscv: add support for MMIO access to the timer registers riscv: implement remote sfence.i using IPIs riscv: cleanup the default power off implementation riscv: poison SBI calls for M-mode riscv: don't allow selecting SBI based drivers for M-mode RISC-V: Add multiple compression image format. riscv: clean up the macro format in each header file riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE riscv: abstract out CSR names for supervisor vs machine mode riscv: separate MMIO functions into their own header file riscv: enter WFI in default_power_off() if SBI does not shutdown RISC-V: Issue a tlb page flush if possible RISC-V: Issue a local tlbflush if possible. RISC-V: Do not invoke SBI call if cpumask is empty ...

Merge branch 'next/nommu' into for-next

2019-11-23T02:59:09+00:00

Conflicts: arch/riscv/boot/Makefile arch/riscv/include/asm/sbi.h

riscv: add nommu support

2019-11-17T23:17:39+00:00

The kernel runs in M-mode without using page tables, and thus can't run bare metal without help from additional firmware. Most of the patch is just stubbing out code not needed without page tables, but there is an interesting detail in the signals implementation: - The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO entry point, but the ELF VDSO is not supported for nommu Linux. We instead copy the code to call the syscall onto the stack. In addition to enabling the nommu code a new defconfig for a small kernel image that can run in nommu mode on qemu is also provided, to run a kernel in qemu you can use the following command line: qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \ -kernel arch/riscv/boot/loader \ -drive file=rootfs.ext2,format=raw,id=hd0 \ -device virtio-blk-device,drive=hd0 Contains contributions from Damien Le Moal . Signed-off-by: Christoph Hellwig Reviewed-by: Anup Patel [paul.walmsley@sifive.com: updated to apply; add CONFIG_MMU guards around PCI_IOBASE definition to fix build issues; fixed checkpatch issues; move the PCI_IO_* and VMEMMAP address space macros along with the others; resolve sparse warning] Signed-off-by: Paul Walmsley