talos-op-linux/arch/powerpc/platforms/cell/Kconfig, branch master

PCI: consolidate PCI config entry in drivers/pci

2018-11-23T02:45:34+00:00

There is no good reason to duplicate the PCI menu in every architecture. Instead provide a selectable HAVE_PCI symbol that indicates availability of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the rest in drivers/pci. Signed-off-by: Christoph Hellwig Reviewed-by: Palmer Dabbelt Acked-by: Max Filippov Acked-by: Thomas Gleixner Acked-by: Bjorn Helgaas Acked-by: Geert Uytterhoeven Acked-by: Paul Burton Signed-off-by: Masahiro Yamada

powerpc: remove redundant 'default n' from Kconfig-s

2018-10-13T11:21:25+00:00

'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Michael Ellerman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

powerpc: Make selects of IBM_EMAC_* depend on IBM_EMAC

2016-12-01T11:07:16+00:00

We have a bunch of Kconfig symbols which select various IBM_EMAC_* symbols. These all cause warnings when IBM_EMAC is not selected. eg. warning: (PPC_CELL_NATIVE && BLUESTONE && CANYONLANDS && GLACIER && EIGER && 440EPX && 440GRX && 440GX && 460SX && 405EX) selects IBM_EMAC_RGMII which has unmet direct dependencies (NETDEVICES && ETHERNET && NET_VENDOR_IBM) So make them all depend on IBM_EMAC being enabled first. Signed-off-by: Michael Ellerman

powerpc/cell: Drop select of MEMORY_HOTPLUG

2016-12-01T11:07:14+00:00

SPU_FS selects MEMORY_HOTPLUG, which is problematic because MEMORY_HOTPLUG is user selectable, meaning we can end up with a broken .config where MEMORY_HOTPLUG is enabled but its dependencies are not, leading to build breakages. The select of MEMORY_HOTPLUG for SPU_FS was added back in 2006, in commit 4da30d15b6d5 ("[POWERPC] spufs: fix memory hotplug dependency"). However we reworked the spufs code and removed the dependency on memory hotplug in 2007 in commit 78bde53e351b ("[POWERPC] spufs: remove need for struct page for SPEs"). So drop the select as it's no longer needed and causes problems. Signed-off-by: Michael Ellerman

powerpc/cell: Remove the Cell QPACE code

2015-12-14T09:41:50+00:00

All users of QPACE have upgraded to QPACE2 so remove the Cell QPACE code. Signed-off-by: Rashmica Gupta Acked-by: Arnd Bergmann Signed-off-by: Michael Ellerman

powerpc: Kconfig: remove BE-only platforms from LE kernel build

2015-09-29T12:57:00+00:00

Currently, little endian is only supported on powernv and pseries, however, Kconfigs still allow us to include other platforms in a LE kernel, this may result in space wasting or even build error if some BE-only platforms always assume they are built for a BE kernel. So just modify the Kconfigs of BE-only platforms to remove them from being built for a LE kernel. For 32bit only platforms, nothing needs to be done, because CPU_LITTLE_ENDIAN depends on PPC64. For 64bit supported platforms, add CPU_BIG_ENDIAN to dependencies explicitly, so that these platforms will be disabled for LE [Suggested-by: Cédric Le Goater ]. Signed-off-by: Boqun Feng Acked-by: Geoff Levand Signed-off-by: Michael Ellerman

powerpc/cell: Drop support for 64K local store on 4K kernels

2015-08-18T09:29:49+00:00

Back in the olden days we added support for using 64K pages to map the SPU (Synergistic Processing Unit) local store on Cell, when the main kernel was using 4K pages. This was useful at the time because distros were using 4K pages, but using 64K pages on the SPUs could reduce TLB pressure there. However these days the number of Cell users is approaching zero, and supporting this option adds unpleasant complexity to the memory management code. So drop the option, CONFIG_SPU_FS_64K_LS, and all related code. Signed-off-by: Michael Ellerman Acked-by: Jeremy Kerr

powerpc: Remove the celleb support

2015-04-07T07:15:13+00:00

The celleb code has seen no actual development for ~7 years. We (maintainers) have no access to test hardware, and it is highly likely the code has bit-rotted. As far as we're aware the hardware was never widely available, and is certainly no longer available, and no one on the list has shown any interest in it over the years. So remove it. If anyone has one and cares please speak up. Signed-off-by: Michael Ellerman Acked-by: Benjamin Herrenschmidt Acked-by: Jeremy Kerr

powerpc/cell: Move spu_handle_mm_fault() out of cell platform

2014-10-08T09:14:54+00:00

Currently spu_handle_mm_fault() is in the cell platform. This code is generically useful for other non-cell co-processors on powerpc. This patch moves this function out of the cell platform into arch/powerpc/mm so that others may use it. Signed-off-by: Ian Munsie Signed-off-by: Michael Neuling Signed-off-by: Michael Ellerman