Talos™ II Linux sources for OpenPOWER https://git.raptorcs.com/git/talos-op-linux/atom?h=master 2020-02-11T22:47:09+00:00 2020-02-11T22:47:09+00:00 Olof Johansson olof@lixom.net 2020-02-11T22:47:07+00:00 urn:sha1:9c87d747cad7413a8bb0201fc457fb8eda8b3959 ARMv8 Juno/Fast Models fix for v5.6 A single fix for PCI interrupt-mapping on FVP Rev C model. This is present since the platform was added. This fix is needed to get VFIO working correctly on this model. * tag 'juno-fix-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: fast models: Fix FVP PCI interrupt-map property Link: https://lore.kernel.org/r/20200205183423.GF38466@bogus Signed-off-by: Olof Johansson <olof@lixom.net> 2020-02-08T22:04:19+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-02-08T22:04:19+00:00 urn:sha1:eab3540562fb44f830e09492374fcc69a283ce47 Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ... 2020-02-08T21:58:44+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-02-08T21:58:44+00:00 urn:sha1:1afa9c3b7c9bdcb562e2afe9f58cc99d0b071cdc Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ... 2020-01-27T16:58:19+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-01-27T16:58:19+00:00 urn:sha1:0238d3c75303d63839ca20e71e4993fdab3fec7b Pull arm64 updates from Will Deacon: "The changes are a real mixed bag this time around. The only scary looking one from the diffstat is the uapi change to asm-generic/mman-common.h, but this has been acked by Arnd and is actually just adding a pair of comments in an attempt to prevent allocation of some PROT values which tend to get used for arch-specific purposes. We'll be using them for Branch Target Identification (a CFI-like hardening feature), which is currently under review on the mailing list. New architecture features: - Support for Armv8.5 E0PD, which benefits KASLR in the same way as KPTI but without the overhead. This allows KPTI to be disabled on CPUs that are not affected by Meltdown, even is KASLR is enabled. - Initial support for the Armv8.5 RNG instructions, which claim to provide access to a high bandwidth, cryptographically secure hardware random number generator. As well as exposing these to userspace, we also use them as part of the KASLR seed and to seed the crng once all CPUs have come online. - Advertise a bunch of new instructions to userspace, including support for Data Gathering Hint, Matrix Multiply and 16-bit floating point. Kexec: - Cleanups in preparation for relocating with the MMU enabled - Support for loading crash dump kernels with kexec_file_load() Perf and PMU drivers: - Cleanups and non-critical fixes for a couple of system PMU drivers FPU-less (aka broken) CPU support: - Considerable fixes to support CPUs without the FP/SIMD extensions, including their presence in heterogeneous systems. Good luck finding a 64-bit userspace that handles this. Modern assembly function annotations: - Start migrating our use of ENTRY() and ENDPROC() over to the new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended to aid debuggers Kbuild: - Cleanup detection of LSE support in the assembler by introducing 'as-instr' - Remove compressed Image files when building clean targets IP checksumming: - Implement optimised IPv4 checksumming routine when hardware offload is not in use. An IPv6 version is in the works, pending testing. Hardware errata: - Work around Cortex-A55 erratum #1530923 Shadow call stack: - Work around some issues with Clang's integrated assembler not liking our perfectly reasonable assembly code - Avoid allocating the X18 register, so that it can be used to hold the shadow call stack pointer in future ACPI: - Fix ID count checking in IORT code. This may regress broken firmware that happened to work with the old implementation, in which case we'll have to revert it and try something else - Fix DAIF corruption on return from GHES handler with pseudo-NMIs Miscellaneous: - Whitelist some CPUs that are unaffected by Spectre-v2 - Reduce frequency of ASID rollover when KPTI is compiled in but inactive - Reserve a couple of arch-specific PROT flags that are already used by Sparc and PowerPC and are planned for later use with BTI on arm64 - Preparatory cleanup of our entry assembly code in preparation for moving more of it into C later on - Refactoring and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits) arm64: acpi: fix DAIF manipulation with pNMI arm64: kconfig: Fix alignment of E0PD help text arm64: Use v8.5-RNG entropy for KASLR seed arm64: Implement archrandom.h for ARMv8.5-RNG arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean' arm64: entry: Avoid empty alternatives entries arm64: Kconfig: select HAVE_FUTEX_CMPXCHG arm64: csum: Fix pathological zero-length calls arm64: entry: cleanup sp_el0 manipulation arm64: entry: cleanup el0 svc handler naming arm64: entry: mark all entry code as notrace arm64: assembler: remove smp_dmb macro arm64: assembler: remove inherit_daif macro ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map() mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use arm64: Use macros instead of hard-coded constants for MAIR_EL1 arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list arm64: kernel: avoid x18 in __cpu_soft_restart arm64: kvm: stop treating register x18 as caller save arm64/lib: copy_page: avoid x18 register in assembler code ... 2020-01-24T20:12:25+00:00 Olof Johansson olof@lixom.net 2020-01-24T20:12:24+00:00 urn:sha1:d030a0dd01306d45569c6a4449dee603f994744a Texas Instruments K3 SoC family changes for 5.6, part 2. - Add DMA nodes for am65x and j721e - Add McASP nodes for am65x and j721e, showcasing the DMA usage - Add CAL node for am65x - Add OV5640 camera support for am65x * tag 'ti-k3-soc-for-v5.6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation Link: https://lore.kernel.org/r/83546942-6215-9c3a-16cd-be7e7c000c0e@ti.com Signed-off-by: Olof Johansson <olof@lixom.net> 2020-01-24T20:06:18+00:00 Olof Johansson olof@lixom.net 2020-01-24T20:06:17+00:00 urn:sha1:e6ecae6b8f6e16b085a70bc6c368626371e3a609 UniPhier ARM64 SoC DT updates for v5.6 - Add reset-names to NAND controller node * tag 'uniphier-dt64-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: add reset-names to NAND controller node Link: https://lore.kernel.org/r/CAK7LNASehDHWgOug=Rz0uBBSP2ntJnNLiarfSdj97tZu+OXLkA@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net> 2020-01-24T11:13:23+00:00 Benoit Parrot bparrot@ti.com 2019-12-11T14:05:58+00:00 urn:sha1:be28d4da7c73f51d4ccd5c3f9cd215d0858bc8c8 Add support for the OV5640 CSI camera: - add the OV5640 nodes - add the CAL node linkage - enable CAL node Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> 2020-01-24T11:13:23+00:00 Benoit Parrot bparrot@ti.com 2019-12-11T14:05:57+00:00 urn:sha1:e98a0424817a08e2e62bdb1cc49de8da38bf6a3d Add CAL dtsi node for AM654 device. Including proper power-domains and clock properties. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> 2020-01-24T07:30:24+00:00 Peter Ujfalusi peter.ujfalusi@ti.com 2020-01-23T11:45:28+00:00 urn:sha1:1c4d35265fb2945c1c4bf2628c81cbc8231afe7f Add the nodes for McASP 0-11 and keep them disabled because several required properties are not present as they are board specific. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> 2020-01-24T07:30:24+00:00 Peter Ujfalusi peter.ujfalusi@ti.com 2020-01-23T11:45:27+00:00 urn:sha1:9bcb631e9953bb434e58a414ee1f5ae93924735e Add the nodes for McASP 0-2 and keep them disabled because several required properties are not present as they are board specific. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>