talos-op-linux/arch/arm/mach-davinci, branch master

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T22:17:27+00:00

Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late, or that had more complex dependencies on more than one topic branch that makes sense to keep separately. - TI support for secure accelerators and hwrng on OMAP4/5 - TI camera changes for dra7 and am437x and SGX improvement due to better reset control support on am335x, am437x and dra7 - Davinci moves to proper clocksource on DM365, and regulator/audio improvements for DM365 and DM644x eval boards" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: OMAP2+: Drop legacy platform data for omap4 des ARM: OMAP2+: Drop legacy platform data for omap4 sham ARM: OMAP2+: Drop legacy platform data for omap4 aes ...

Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2020-01-29T18:09:44+00:00

Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...

Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap

2020-01-27T21:03:00+00:00

Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap

Merge 5.5-rc7 into usb-next

2020-01-21T18:36:59+00:00

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

usb: musb: davinci: Convert to use GPIO descriptor

2020-01-15T13:47:00+00:00

The DaVinci MUSB glue contains an optional GPIO line to control VBUS power, convert this to use a GPIO descriptor and augment the EVM board file to provide this descriptor. I can't get this driver to compile properly and it depends on broken but when I didn get it to compile brokenly, it did at least not complain about THIS code being broken so I don't think I broke the driver any more than what it already is. I did away with the ifdefs that do not work with multiplatform anyway so the day someone decides to resurrect the code, the path to get it working should be easier as well since DaVinci is now multiplatform. Cc: Sekhar Nori Cc: Bartosz Golaszewski Cc: Tony Lindgren Signed-off-by: Linus Walleij [b-liu@ti.com: fixed one instance still ref to global variable vbus_state] Signed-off-by: Bin Liu Link: https://lore.kernel.org/r/20200115132547.364-25-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman

ARM: davinci: dm644x-evm: Add Fixed regulators needed for tlv320aic33

2020-01-13T12:06:26+00:00

The codec driver needs correct regulators in order to probe. Both VCC_3.3V and VCC_1.8V is always on fixed regulators on the board. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori

ARM: davinci: dm365-evm: Add Fixed regulators needed for tlv320aic3101

2020-01-13T12:05:35+00:00

The codec driver needs correct regulators in order to probe. Both VCC_3V3 and VCC_1V8 is always on fixed regulators on the board. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori

ARM: davinci: remove legacy timer support

2020-01-13T07:50:00+00:00

All platforms have now been switched to the new clocksource driver. Remove the old code and various no longer needed bits and pieces. Signed-off-by: Bartosz Golaszewski Reviewed-by: David Lechner Signed-off-by: Sekhar Nori

ARM: davinci: dm365: switch to using the clocksource driver

2020-01-13T07:50:00+00:00

We now have a proper clocksource driver for davinci. Switch the dm365 platform to using it. Signed-off-by: Bartosz Golaszewski Reviewed-by: David Lechner Signed-off-by: Sekhar Nori

ARM: davinci: select CONFIG_RESET_CONTROLLER

2020-01-08T18:23:55+00:00

Selecting RESET_CONTROLLER is actually required, otherwise we can get a link failure in the clock driver: drivers/clk/davinci/psc.o: In function `__davinci_psc_register_clocks': psc.c:(.text+0x9a0): undefined reference to `devm_reset_controller_register' drivers/clk/davinci/psc-da850.o: In function `da850_psc0_init': psc-da850.c:(.text+0x24): undefined reference to `reset_controller_add_lookup' Link: https://lore.kernel.org/r/20191210195202.622734-1-arnd@arndb.de Fixes: f962396ce292 ("ARM: davinci: support multiplatform build for ARM v5") Cc: # v5.4 Signed-off-by: Arnd Bergmann Reviewed-by: Bartosz Golaszewski Reviewed-by: Philipp Zabel Acked-by: Sekhar Nori Signed-off-by: Olof Johansson