talos-op-linux/Documentation/devicetree, branch master

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-02-16T00:49:25+00:00

Pull input updates from Dmitry Torokhov: - a few drivers have been updated to use flexible-array syntax instead of GCC extension - ili210x touchscreen driver now supports the 2120 protocol flavor - a couple more of Synaptics devices have been switched over to RMI4 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - replace zero-length array with flexible-array member Input: tca6416-keypad - replace zero-length array with flexible-array member Input: gpio_keys_polled - replace zero-length array with flexible-array member Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list Input: synaptics - enable SMBus on ThinkPad L470 Input: synaptics - switch T470s to RMI4 by default Input: gpio_keys - replace zero-length array with flexible-array member Input: goldfish_events - replace zero-length array with flexible-array member Input: psmouse - switch to using i2c_new_scanned_device() Input: ili210x - add ili2120 support Input: ili210x - fix return value of is_visible function

Input: ili210x - add ili2120 support

2020-02-10T18:00:22+00:00

This adds support for the Ilitek ili2120 touchscreen found in the Fairphone 2 smartphone. Signed-off-by: Luca Weiss Link: https://lore.kernel.org/r/20200209151904.661210-1-luca@z3ntu.xyz Signed-off-by: Dmitry Torokhov

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T22:04:19+00:00

Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T21:58:44+00:00

Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...

Merge branch 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2020-02-07T20:54:13+00:00

Pull i2c updates from Wolfram Sang: "i2c core: - huge improvements and refactorizations of the Linux I2C documentation (lots of thanks to Luca for doing it and Jean for the careful review) - subsystem wide API conversion to i2c_new_client_device() - remove obsolete parport-light driver - smaller core updates (removal of 'extern', enabling more compile testing, use more helper macros) - and quite a bunch of driver updates (new IDs, simplifications, better PM, support of atomic transfers and other improvements) i2c-mux: - The main feature is the idle-state rework of the pca954x driver from Biwen Li at24 driver: - minor maintenance: update the license tag, sort headers - move support for the write-protect pin into nvmem core - add a reference to the new wp-gpios property in nvmem to at25 bindings - add support for regulator and pm_runtime control" * 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (91 commits) i2c: cros-ec-tunnel: Fix ACPI identifier i2c: cros-ec-tunnel: Fix slave device enumeration i2c: stm32f7: add PM_SLEEP suspend/resume support i2c: cadence: Fix wording in i2c-cadence driver i2c: cadence: Fix power management order of operations i2c: cadence: Fix error printing in case of defer i2c: cadence: Handle transfer_size rollover i2c: i801: Add support for Intel Comet Lake PCH-V docs: i2c: writing-clients: properly name the stop condition docs: i2c: i2c-protocol: use same wording as smbus-protocol docs: i2c: rename sections so the overall picture is clearer docs: i2c: old-module-parameters: use monospace instead of "" docs: i2c: old-module-parameters: clarify this is for obsolete kernels docs: i2c: old-module-parameters: fix internal hyperlink docs: i2c: instantiating-devices: use monospace for sysfs attributes docs: i2c: instantiating-devices: rearrange static instatiation docs: i2c: instantiating-devices: fix internal hyperlink docs: i2c: smbus-protocol: improve I2C Block transactions description docs: i2c: smbus-protocol: fix punctuation docs: i2c: smbus-protocol: fix typo ...

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-02-07T20:40:50+00:00

Pull clk fixes from Stephen Boyd: "A collection of fixes: - Make of_clk.h self contained - Fix new qcom DT bindings that just merged to match the DTS files - Fix qcom clk driver to properly detect DFS clk frequencies - Fix the ls1028a driver to not deref a pointer before assigning it" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: of: clk: Make self-contained clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for videocc-sc7180 dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180 clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for gpucc-sc7180 dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998 clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for dispcc-sc7180 clk: qcom: Get rid of fallback global names for dispcc-sc7180 dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180 clk: qcom: rcg2: Don't crash if our parent can't be found; return an error clk: ls1028a: fix a dereference of pointer 'parent' before a null check dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()

Merge tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog

2020-02-07T20:30:16+00:00

Pull watchdog updates from Wim Van Sebroeck: - add IT8786 chipset ID - addition of sam9x60 compatible watchdog - da9062 improvements - fix UAF in reboot notifier handling in watchdog core code - other fixes and small improvements * tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9062: make restart handler atomic safe watchdog: mtk_wdt: mt2712: Add reset controller watchdog: mtk_wdt: mt8183: Add reset controller dt-bindings: mediatek: mt2712: Add #reset-cells dt-bindings: mediatek: mt8183: Add #reset-cells dt-bindings: watchdog: da9062: add suspend disable option watchdog: it87_wdt: add IT8786 ID watchdog: dw_wdt: ping watchdog to reset countdown before start watchdog: fix UAF in reboot notifier handling in watchdog core code watchdog: cadence: Skip printing pointer value watchdog: qcom: Use platform_get_irq_optional() for bark irq watchdog: da9062: add power management ops watchdog: make DesignWare watchdog allow users to set bigger timeout value drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog

Merge tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

2020-02-05T18:11:51+00:00

Pull pwm updates from Thierry Reding: "Mostly cleanups and minor improvements with some new chip support for some drivers" * tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits) pwm: Remove set but not set variable 'pwm' pwm: sun4i: Initialize variables before use pwm: stm32: Remove automatic output enable pwm: sun4i: Narrow scope of local variable pwm: bcm2835: Allow building for ARCH_BRCMSTB pwm: imx27: Eliminate error message for defer probe pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR pwm: sun4i: Move pwm_calculate() out of spin_lock() pwm: omap-dmtimer: Allow compiling with COMPILE_TEST pwm: omap-dmtimer: put_device() after of_find_device_by_node() pwm: omap-dmtimer: Simplify error handling pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional pwm: Implement tracing for .get_state() and .apply_state() pwm: rcar: Document inability to set duty_cycle = 0 pwm: rcar: Drop useless call to pwm_get_state() pwm: Fix minor Kconfig whitespace issues pwm: atmel: Implement .get_state() pwm: atmel: Use register accessors for channels pwm: atmel: Document known weaknesses of both hardware and software pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation ...

Merge tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2020-02-05T17:49:54+00:00

Pull iommu updates from Joerg Roedel: - Allow compiling the ARM-SMMU drivers as modules. - Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code collected by Will Deacon. The merge-commit (6855d1ba7537) has all the details. - Cleanup of the iommu_put_resv_regions() call-backs in various drivers. - AMD IOMMU driver cleanups. - Update for the x2APIC support in the AMD IOMMU driver. - Preparation patches for Intel VT-d nested mode support. - RMRR and identity domain handling fixes for the Intel VT-d driver. - More small fixes and cleanups. * tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits) iommu/amd: Remove the unnecessary assignment iommu/vt-d: Remove unnecessary WARN_ON_ONCE() iommu/vt-d: Unnecessary to handle default identity domain iommu/vt-d: Allow devices with RMRRs to use identity domain iommu/vt-d: Add RMRR base and end addresses sanity check iommu/vt-d: Mark firmware tainted if RMRR fails sanity check iommu/amd: Remove unused struct member iommu/amd: Replace two consecutive readl calls with one readq iommu/vt-d: Don't reject Host Bridge due to scope mismatch PCI/ATS: Add PASID stubs iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device iommu/arm-smmu-v3: Improve add_device() error handling iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE iommu/arm-smmu-v3: Add second level of context descriptor table iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure iommu/arm-smmu-v3: Propagate ssid_bits iommu/arm-smmu-v3: Add support for Substream IDs iommu/arm-smmu-v3: Add context descriptor tables allocators iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support ACPI/IORT: Parse SSID property of named component node ...

dt-bindings: Fix paths in schema $id fields

2020-02-05T09:14:57+00:00

The $id path checks were inadequately checking the path part of the $id value. With the check fixed, there's a number of errors that need to be fixed. Most of the errors are including 'bindings/' in the path which should not be as that is considered the root. Cc: Andy Gross Cc: Bjorn Andersson Cc: Manivannan Sadhasivam Cc: Michael Turquette Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "Nuno Sá" Cc: Jean Delvare Cc: Stefan Popa Cc: Jonathan Cameron Cc: Hartmut Knaack Cc: Lars-Peter Clausen Cc: Peter Meerwald-Stadler Cc: Marcus Folkesson Cc: Kent Gustavsson Cc: Dmitry Torokhov Cc: linux-clk@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Reviewed-by: Guenter Roeck Reviewed-by: Stephen Boyd Signed-off-by: Rob Herring