talos-op-linux/Documentation/devicetree/bindings/phy, branch master

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-02-08T21:58:44+00:00

Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...

dt-bindings: phy: Fix errors in intel,lgm-emmc-phy example

2020-02-04T22:42:20+00:00

DT labels can't have '-' in them causing a compile failure in the example. Fixing that leads to more warnings: Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:23.13-33: Warning (reg_format): /example-0/chiptop@e0200000/emmc-phy@a8:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #address-cells value Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #size-cells value Fixes: 5bc999108025 ("dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY") Cc: Ramuthevar Vadivel Murugan Cc: Dafna Hirschfeld Cc: Kishon Vijay Abraham I Signed-off-by: Rob Herring

Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm

2020-01-30T16:04:01+00:00

Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...

Merge tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2020-01-30T15:47:58+00:00

Pull devicetree updates from Rob Herring: - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert) - Fix for DMA coherent devices on Power - Rework and simplify the DT phandle cache code - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART, STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC, STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010, DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks, Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI, Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM, Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI - New binding schemas for SATA and PATA controllers, TI and Infineon VR controllers, MAX31730 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt, renesas,etheravb-r8a77961 - Add USB 'super-speed-plus' as a documented speed - Vendor prefixes for broadmobi, calaosystems, kam, and mps - Clean-up the multiple flavors of ST-Ericsson vendor prefixes * tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits) scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles" of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc dt-bindings: leds: Convert gpio-leds to DT schema dt-bindings: leds: Convert common LED binding to schema dt-bindings: PCI: Convert generic host binding to DT schema dt-bindings: PCI: Convert Arm Versatile binding to DT schema dt-bindings: Be explicit about installing deps dt-bindings: stm32: convert dfsdm to json-schema dt-bindings: serial: Convert STM32 UART to json-schema dt-bindings: serial: Convert rs485 bindings to json-schema dt-bindings: timer: Use non-empty ranges in example dt-bindings: arm-boards: typo fix dt-bindings: Add TI and Infineon VR Controllers as trivial devices dt-binding: usb: add "super-speed-plus" dt-bindings: rcar-csi2: Convert bindings to json-schema dt-bindings: iio: adc: ad7606: Fix wrong maxItems value dt-bindings: Convert Faraday FTIDE010 to DT schema dt-bindings: Create DT bindings for PATA controllers dt-bindings: Create DT bindings for SATA controllers dt: bindings: add vendor prefix for Kamstrup A/S ...

dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml

2020-01-24T20:10:48+00:00

Running `make dt_binging_check`, gives the error: DTC Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.example.dt.yaml Error: Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.example.dts:20.41-42 syntax error FATAL ERROR: Unable to parse input tree This is because the example uses the macro GPIO_ACTIVE_HIGH which is defined in gpio.h but the include of this header is missing. Add the include to fix the error. Fixes: f6f149604eef ("dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy") Link: https://lore.kernel.org/r/20200124105753.15976-1-dafna.hirschfeld@collabora.com Signed-off-by: Dafna Hirschfeld Acked-by: Rob Herring Signed-off-by: Olof Johansson

Merge tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

2020-01-17T06:52:26+00:00

Kishon writes: phy: for 5.6 *) Add support in PHY core to create link between PHY consumer and PHY provider *) Add DisplayPort PHY configuration set to be used for negotiating the configurations to be used between DisplayPort controller and DisplayPort PHY *) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for J721E SoC (Supports USB and PCIe) *) Add PHY driver for eMMC PHY in Intel LGM SoC *) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new Synopsys USB Controller *) Add support for 16nm SATA PHY present in Broadcom 7216 SoC *) Fix lost packet issue, fix MDIO from getting inaccessible, fix occasional transaction failures, fix USB driver from crashing in Broadcom USB PHY driver *) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150 *) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from display controller to rockchip-inno-dsidphy *) Other cleanups including compile testing for some of the PHY drivers, fixing Kconfig indentation, duplicate writes in drivers etc., Signed-off-by: Kishon Vijay Abraham I * tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (54 commits) dt-bindings: phy: Add PHY_TYPE_DP definition phy: ti: j721e-wiz: Fix return value check in wiz_probe() dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE phy: ti: j721e-wiz: Manage typec-gpio-dir dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO phy: cadence: Sierra: add phy_reset hook phy: cadence: Sierra: remove redundant initialization of pointer regmap phy: Add DisplayPort configuration options phy: Enable compile testing for some of drivers phy: mediatek: Fix Kconfig indentation phy: intel-lgm-emmc: Add support for eMMC PHY dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC dt-bindings: phy: Document WIZ (SERDES wrapper) bindings phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove() phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz phy: cadence: Sierra: Change MAX_LANES of Sierra to 16 phy: cadence: Sierra: Check for PLL lock during PHY power on phy: cadence: Sierra: Get reset control "array" for each link ...

dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema

2020-01-14T05:20:19+00:00

The Allwinner A80 SoCs have a USB PHY controller that is used by Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I

dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO

2020-01-14T05:20:19+00:00

This is an optional GPIO, if specified will be used to swap lane 0 and lane 1 based on GPIO status. This is required to achieve plug flip support for USB Type-C. Type-C companions typically need some time after the cable is plugged before and before they reflect the correct status of Type-C plug orientation on the DIR line. Type-C Spec specifies CC attachment debounce time (tCCDebounce) of 100 ms (min) to 200 ms (max). Allow the DT node to specify the time (in ms) that we need to wait before sampling the DIR line. Signed-off-by: Roger Quadros Cc: Rob Herring Reviewed-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I

dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY

2020-01-14T05:20:19+00:00

Add a YAML schema to use the host controller driver with the eMMC PHY on Intel's Lightning Mountain SoC. Signed-off-by: Ramuthevar Vadivel Murugan Reviewed-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I

dt-bindings: phy: Document WIZ (SERDES wrapper) bindings

2020-01-14T05:20:19+00:00

Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a PHY but a wrapper used to configure some of the input signals to the SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes. Signed-off-by: Kishon Vijay Abraham I [jsarha@ti.com: Add separate compatible for Sierra(16G) and Torrent(10G) SERDES] Signed-off-by: Jyri Sarha Reviewed-by: Rob Herring