diff options
Diffstat (limited to 'src/ssx/pgp/pgp_pmc.h')
| -rwxr-xr-x | src/ssx/pgp/pgp_pmc.h | 105 |
1 files changed, 105 insertions, 0 deletions
diff --git a/src/ssx/pgp/pgp_pmc.h b/src/ssx/pgp/pgp_pmc.h new file mode 100755 index 0000000..1b372db --- /dev/null +++ b/src/ssx/pgp/pgp_pmc.h @@ -0,0 +1,105 @@ +#ifndef __PGP_PMC_H__ +#define __PGP_PMC_H__ + +// $Id: pgp_pmc.h,v 1.2 2014/02/03 01:30:35 daviddu Exp $ +// $Source: /afs/awd/projects/eclipz/KnowledgeBase/.cvsroot/eclipz/chips/p8/working/procedures/ssx/pgp/pgp_pmc.h,v $ +//----------------------------------------------------------------------------- +// *! (C) Copyright International Business Machines Corp. 2013 +// *! All Rights Reserved -- Property of IBM +// *! *** IBM Confidential *** +//----------------------------------------------------------------------------- + +/// \file pgp_pmc.h +/// \brief PgP procedures and support for PMC operations + +#include "ssx.h" + +#include "pgp_common.h" +#include "pmc_register_addresses.h" +#include "pmc_firmware_registers.h" + +//////////////////////////////////////////////////////////////////////////// +// SCOM +//////////////////////////////////////////////////////////////////////////// + +#ifndef __ASSEMBLER__ + +int +_getscom(uint32_t address, uint64_t *data, SsxInterval timeout); + +int +getscom(uint32_t address, uint64_t *data); + +int +_putscom(uint32_t address, uint64_t data, SsxInterval timeout); + +int +putscom(uint32_t address, uint64_t data); + +#endif /* __ASSEMBLER__ */ + +// Error/Panic Codes + +#define SCOM_PCB_ERROR_1_GETSCOM 0x00726601 +#define SCOM_PCB_ERROR_2_GETSCOM 0x00726602 +#define SCOM_PCB_ERROR_3_GETSCOM 0x00726603 +#define SCOM_PCB_ERROR_4_GETSCOM 0x00726604 +#define SCOM_PCB_ERROR_5_GETSCOM 0x00726605 +#define SCOM_PCB_ERROR_6_GETSCOM 0x00726606 +#define SCOM_PCB_ERROR_7_GETSCOM 0x00726607 +#define SCOM_PCB_ERROR_1_PUTSCOM 0x00726608 +#define SCOM_PCB_ERROR_2_PUTSCOM 0x00726609 +#define SCOM_PCB_ERROR_3_PUTSCOM 0x0072660a +#define SCOM_PCB_ERROR_4_PUTSCOM 0x0072660b +#define SCOM_PCB_ERROR_5_PUTSCOM 0x0072660c +#define SCOM_PCB_ERROR_6_PUTSCOM 0x0072660d +#define SCOM_PCB_ERROR_7_PUTSCOM 0x0072660e + +#define SCOM_TIMEOUT_ERROR 0x00726610 +#define SCOM_TIMEOUT_ERROR_GETSCOM 0x00726611 +#define SCOM_TIMEOUT_ERROR_PUTSCOM 0x00726612 +#define SCOM_PROTOCOL_ERROR_GETSCOM 0x00726613 +#define SCOM_PROTOCOL_ERROR_PUTSCOM 0x00726614 +#define SCOM_PROTOCOL_ERROR_GETSCOM_BUSY 0x00726615 +#define SCOM_PROTOCOL_ERROR_PUTSCOM_BUSY 0x00726616 + + +/// The default timeout for getscom()/putscom() +/// +/// This timeout is enforced by the firmware to guarantee a timeout regardless +/// of the hardware setup. +/// +/// The expectation is that the PgP hardware will be set up to enforce a PCB +/// timeout of 8K cycles, or 16.384us @ 500 MHz. A timeout only occurs if +/// someone erroneously issues a SCOM for a chiplet that does not exist. If +/// this happens, then all other SCOMS waiting for the timed-out SCOM to +/// finish will have to wait as well. Aside from the timeout error, the +/// hardware arbitration and hard latency calculations guarantee that a SCOM +/// from any master will complete in under 1us, regardless of PCB utilization. +/// +/// Assuming that the PCB timeout is a rare event that will only happen when a +/// console user types an illegal address for getscom/putscom, then we should +/// be able to use 17us as a hard upper bound for a soft timeout. In practice +/// this software timeout should never be observed - if it is, then something +/// (either the setup, hardware or firmware) must be broken. + +#ifndef SCOM_TIMEOUT +#define SCOM_TIMEOUT SSX_MICROSECONDS(17) +#endif + + +/// The default getscom()/putscom() error limit. +/// +/// This defines the maximum PCB error return code which will not cause +/// getscom()/putscom() to panic. The choice of this error limit is +/// application dependent. For lab applications we should never try to SCOM a +/// partial-good chiplet, so the limit is set at PCB_ERROR_CHIPLET_OFFLINE. +/// For production applications it may be that notification of garded cores is +/// late, so production code may need to handle PCB_ERROR_PARTIAL_GOOD as +/// well. + +#ifndef SCOM_ERROR_LIMIT +#define SCOM_ERROR_LIMIT PCB_ERROR_CHIPLET_OFFLINE +#endif + +#endif // __PGP_PMC_H__ |
