summaryrefslogtreecommitdiffstats
path: root/drivers/net/natsemi.c
blob: 04743bd2b34b009e14a2b5bc9f1cee2ac6a4ea1a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
/*
   natsemi.c: A U-Boot driver for the NatSemi DP8381x series.
   Author: Mark A. Rakes (mark_rakes@vivato.net)

   Adapted from an Etherboot driver written by:

   Copyright (C) 2001 Entity Cyber, Inc.

   This development of this Etherboot driver was funded by

      Sicom Systems: http://www.sicompos.com/

   Author: Marty Connor (mdc@thinguin.org)
   Adapted from a Linux driver which was written by Donald Becker

   This software may be used and distributed according to the terms
   of the GNU Public License (GPL), incorporated herein by reference.

   Original Copyright Notice:

   Written/copyright 1999-2001 by Donald Becker.

   This software may be used and distributed according to the terms of
   the GNU General Public License (GPL), incorporated herein by reference.
   Drivers based on or derived from this code fall under the GPL and must
   retain the authorship, copyright and license notice.  This file is not
   a complete program and may only be used when the entire operating
   system is licensed under the GPL.  License for under other terms may be
   available.  Contact the original author for details.

   The original author may be reached as becker@scyld.com, or at
   Scyld Computing Corporation
   410 Severn Ave., Suite 210
   Annapolis MD 21403

   Support information and updates available at
   http://www.scyld.com/network/netsemi.html

   References:
   http://www.scyld.com/expert/100mbps.html
   http://www.scyld.com/expert/NWay.html
   Datasheet is available from:
   http://www.national.com/pf/DP/DP83815.html
*/

/* Revision History
 * October 2002 mar	1.0
 *   Initial U-Boot Release.  Tested with Netgear FA311 board
 *   and dp83815 chipset on custom board
*/

/* Includes */
#include <common.h>
#include <malloc.h>
#include <net.h>
#include <netdev.h>
#include <asm/io.h>
#include <pci.h>

/* defines */
#define EEPROM_SIZE 0xb /*12 16-bit chunks, or 24 bytes*/

#define DSIZE		0x00000FFF
#define ETH_ALEN	6
#define CRC_SIZE	4
#define TOUT_LOOP	500000
#define TX_BUF_SIZE	1536
#define RX_BUF_SIZE	1536
#define NUM_RX_DESC	4	/* Number of Rx descriptor registers. */

/* Offsets to the device registers.
   Unlike software-only systems, device drivers interact with complex hardware.
   It's not useful to define symbolic names for every register bit in the
   device.  */
enum register_offsets {
	ChipCmd	= 0x00,
	ChipConfig	= 0x04,
	EECtrl		= 0x08,
	IntrMask	= 0x14,
	IntrEnable	= 0x18,
	TxRingPtr	= 0x20,
	TxConfig	= 0x24,
	RxRingPtr	= 0x30,
	RxConfig	= 0x34,
	ClkRun		= 0x3C,
	RxFilterAddr	= 0x48,
	RxFilterData	= 0x4C,
	SiliconRev	= 0x58,
	PCIPM		= 0x44,
	BasicControl	= 0x80,
	BasicStatus	= 0x84,
	/* These are from the spec, around page 78... on a separate table. */
	PGSEL		= 0xCC,
	PMDCSR		= 0xE4,
	TSTDAT		= 0xFC,
	DSPCFG		= 0xF4,
	SDCFG		= 0x8C
};

/* Bit in ChipCmd. */
enum ChipCmdBits {
	ChipReset	= 0x100,
	RxReset		= 0x20,
	TxReset		= 0x10,
	RxOff		= 0x08,
	RxOn		= 0x04,
	TxOff		= 0x02,
	TxOn		= 0x01
};

enum ChipConfigBits {
	LinkSts	= 0x80000000,
	HundSpeed	= 0x40000000,
	FullDuplex	= 0x20000000,
	TenPolarity	= 0x10000000,
	AnegDone	= 0x08000000,
	AnegEnBothBoth	= 0x0000E000,
	AnegDis100Full	= 0x0000C000,
	AnegEn100Both	= 0x0000A000,
	AnegDis100Half	= 0x00008000,
	AnegEnBothHalf	= 0x00006000,
	AnegDis10Full	= 0x00004000,
	AnegEn10Both	= 0x00002000,
	DuplexMask	= 0x00008000,
	SpeedMask	= 0x00004000,
	AnegMask	= 0x00002000,
	AnegDis10Half	= 0x00000000,
	ExtPhy		= 0x00001000,
	PhyRst		= 0x00000400,
	PhyDis		= 0x00000200,
	BootRomDisable	= 0x00000004,
	BEMode		= 0x00000001,
};

enum TxConfig_bits {
	TxDrthMask	= 0x3f,
	TxFlthMask	= 0x3f00,
	TxMxdmaMask	= 0x700000,
	TxMxdma_512	= 0x0,
	TxMxdma_4	= 0x100000,
	TxMxdma_8	= 0x200000,
	TxMxdma_16	= 0x300000,
	TxMxdma_32	= 0x400000,
	TxMxdma_64	= 0x500000,
	TxMxdma_128	= 0x600000,
	TxMxdma_256	= 0x700000,
	TxCollRetry	= 0x800000,
	TxAutoPad	= 0x10000000,
	TxMacLoop	= 0x20000000,
	TxHeartIgn	= 0x40000000,
	TxCarrierIgn	= 0x80000000
};

enum RxConfig_bits {
	RxDrthMask	= 0x3e,
	RxMxdmaMask	= 0x700000,
	RxMxdma_512	= 0x0,
	RxMxdma_4	= 0x100000,
	RxMxdma_8	= 0x200000,
	RxMxdma_16	= 0x300000,
	RxMxdma_32	= 0x400000,
	RxMxdma_64	= 0x500000,
	RxMxdma_128	= 0x600000,
	RxMxdma_256	= 0x700000,
	RxAcceptLong	= 0x8000000,
	RxAcceptTx	= 0x10000000,
	RxAcceptRunt	= 0x40000000,
	RxAcceptErr	= 0x80000000
};

/* Bits in the RxMode register. */
enum rx_mode_bits {
	AcceptErr	= 0x20,
	AcceptRunt	= 0x10,
	AcceptBroadcast	= 0xC0000000,
	AcceptMulticast	= 0x00200000,
	AcceptAllMulticast = 0x20000000,
	AcceptAllPhys	= 0x10000000,
	AcceptMyPhys	= 0x08000000
};

typedef struct _BufferDesc {
	u32 link;
	vu_long cmdsts;
	u32 bufptr;
	u32 software_use;
} BufferDesc;

/* Bits in network_desc.status */
enum desc_status_bits {
	DescOwn = 0x80000000, DescMore = 0x40000000, DescIntr = 0x20000000,
	DescNoCRC = 0x10000000, DescPktOK = 0x08000000,
	DescSizeMask = 0xfff,

	DescTxAbort = 0x04000000, DescTxFIFO = 0x02000000,
	DescTxCarrier = 0x01000000, DescTxDefer = 0x00800000,
	DescTxExcDefer = 0x00400000, DescTxOOWCol = 0x00200000,
	DescTxExcColl = 0x00100000, DescTxCollCount = 0x000f0000,

	DescRxAbort = 0x04000000, DescRxOver = 0x02000000,
	DescRxDest = 0x01800000, DescRxLong = 0x00400000,
	DescRxRunt = 0x00200000, DescRxInvalid = 0x00100000,
	DescRxCRC = 0x00080000, DescRxAlign = 0x00040000,
	DescRxLoop = 0x00020000, DesRxColl = 0x00010000,
};

/* Globals */
#ifdef NATSEMI_DEBUG
static int natsemi_debug = 0;	/* 1 verbose debugging, 0 normal */
#endif
static u32 SavedClkRun;
static unsigned int cur_rx;
static unsigned int advertising;
static unsigned int rx_config;
static unsigned int tx_config;

/* Note: transmit and receive buffers and descriptors must be
   longword aligned */
static BufferDesc txd __attribute__ ((aligned(4)));
static BufferDesc rxd[NUM_RX_DESC] __attribute__ ((aligned(4)));

static unsigned char txb[TX_BUF_SIZE] __attribute__ ((aligned(4)));
static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE]
    __attribute__ ((aligned(4)));

/* Function Prototypes */
#if 0
static void write_eeprom(struct eth_device *dev, long addr, int location,
			 short value);
#endif
static int read_eeprom(struct eth_device *dev, long addr, int location);
static int mdio_read(struct eth_device *dev, int phy_id, int location);
static int natsemi_init(struct eth_device *dev, bd_t * bis);
static void natsemi_reset(struct eth_device *dev);
static void natsemi_init_rxfilter(struct eth_device *dev);
static void natsemi_init_txd(struct eth_device *dev);
static void natsemi_init_rxd(struct eth_device *dev);
static void natsemi_set_rx_mode(struct eth_device *dev);
static void natsemi_check_duplex(struct eth_device *dev);
static int natsemi_send(struct eth_device *dev, void *packet, int length);
static int natsemi_poll(struct eth_device *dev);
static void natsemi_disable(struct eth_device *dev);

static struct pci_device_id supported[] = {
	{PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815},
	{}
};

#define bus_to_phys(a)	pci_mem_to_phys((pci_dev_t)dev->priv, a)
#define phys_to_bus(a)	pci_phys_to_mem((pci_dev_t)dev->priv, a)

static inline int
INW(struct eth_device *dev, u_long addr)
{
	return le16_to_cpu(*(vu_short *) (addr + dev->iobase));
}

static int
INL(struct eth_device *dev, u_long addr)
{
	return le32_to_cpu(*(vu_long *) (addr + dev->iobase));
}

static inline void
OUTW(struct eth_device *dev, int command, u_long addr)
{
	*(vu_short *) ((addr + dev->iobase)) = cpu_to_le16(command);
}

static inline void
OUTL(struct eth_device *dev, int command, u_long addr)
{
	*(vu_long *) ((addr + dev->iobase)) = cpu_to_le32(command);
}

/*
 * Function: natsemi_initialize
 *
 * Description: Retrieves the MAC address of the card, and sets up some
 * globals required by other routines,  and initializes the NIC, making it
 * ready to send and receive packets.
 *
 * Side effects:
 *            leaves the natsemi initialized, and ready to receive packets.
 *
 * Returns:   struct eth_device *:          pointer to NIC data structure
 */

int
natsemi_initialize(bd_t * bis)
{
	pci_dev_t devno;
	int card_number = 0;
	struct eth_device *dev;
	u32 iobase, status, chip_config;
	int i, idx = 0;
	int prev_eedata;
	u32 tmp;

	while (1) {
		/* Find PCI device(s) */
		if ((devno = pci_find_devices(supported, idx++)) < 0) {
			break;
		}

		pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
		iobase &= ~0x3;	/* bit 1: unused and bit 0: I/O Space Indicator */

		pci_write_config_dword(devno, PCI_COMMAND,
				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);

		/* Check if I/O accesses and Bus Mastering are enabled. */
		pci_read_config_dword(devno, PCI_COMMAND, &status);
		if (!(status & PCI_COMMAND_MEMORY)) {
			printf("Error: Can not enable MEM access.\n");
			continue;
		} else if (!(status & PCI_COMMAND_MASTER)) {
			printf("Error: Can not enable Bus Mastering.\n");
			continue;
		}

		dev = (struct eth_device *) malloc(sizeof *dev);
		if (!dev) {
			printf("natsemi: Can not allocate memory\n");
			break;
		}
		memset(dev, 0, sizeof(*dev));

		sprintf(dev->name, "dp83815#%d", card_number);
		dev->iobase = bus_to_phys(iobase);
#ifdef NATSEMI_DEBUG
		printf("natsemi: NatSemi ns8381[56] @ %#x\n", dev->iobase);
#endif
		dev->priv = (void *) devno;
		dev->init = natsemi_init;
		dev->halt = natsemi_disable;
		dev->send = natsemi_send;
		dev->recv = natsemi_poll;

		eth_register(dev);

		card_number++;

		/* Set the latency timer for value. */
		pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);

		udelay(10 * 1000);

		/* natsemi has a non-standard PM control register
		 * in PCI config space.  Some boards apparently need
		 * to be brought to D0 in this manner.  */
		pci_read_config_dword(devno, PCIPM, &tmp);
		if (tmp & (0x03 | 0x100)) {
			/* D0 state, disable PME assertion */
			u32 newtmp = tmp & ~(0x03 | 0x100);
			pci_write_config_dword(devno, PCIPM, newtmp);
		}

		printf("natsemi: EEPROM contents:\n");
		for (i = 0; i <= EEPROM_SIZE; i++) {
			short eedata = read_eeprom(dev, EECtrl, i);
			printf(" %04hx", eedata);
		}
		printf("\n");

		/* get MAC address */
		prev_eedata = read_eeprom(dev, EECtrl, 6);
		for (i = 0; i < 3; i++) {
			int eedata = read_eeprom(dev, EECtrl, i + 7);
			dev->enetaddr[i*2] = (eedata << 1) + (prev_eedata >> 15);
			dev->enetaddr[i*2+1] = eedata >> 7;
			prev_eedata = eedata;
		}

		/* Reset the chip to erase any previous misconfiguration. */
		OUTL(dev, ChipReset, ChipCmd);

		advertising = mdio_read(dev, 1, 4);
		chip_config = INL(dev, ChipConfig);
#ifdef NATSEMI_DEBUG
		printf("%s: Transceiver status %#08X advertising %#08X\n",
			dev->name, (int) INL(dev, BasicStatus), advertising);
		printf("%s: Transceiver default autoneg. %s 10%s %s duplex.\n",
			dev->name, chip_config & AnegMask ? "enabled, advertise" :
			"disabled, force", chip_config & SpeedMask ? "0" : "",
			chip_config & DuplexMask ? "full" : "half");
#endif
		chip_config |= AnegEnBothBoth;
#ifdef NATSEMI_DEBUG
		printf("%s: changed to autoneg. %s 10%s %s duplex.\n",
			dev->name, chip_config & AnegMask ? "enabled, advertise" :
			"disabled, force", chip_config & SpeedMask ? "0" : "",
			chip_config & DuplexMask ? "full" : "half");
#endif
		/*write new autoneg bits, reset phy*/
		OUTL(dev, (chip_config | PhyRst), ChipConfig);
		/*un-reset phy*/
		OUTL(dev, chip_config, ChipConfig);

		/* Disable PME:
		 * The PME bit is initialized from the EEPROM contents.
		 * PCI cards probably have PME disabled, but motherboard
		 * implementations may have PME set to enable WakeOnLan.
		 * With PME set the chip will scan incoming packets but
		 * nothing will be written to memory. */
		SavedClkRun = INL(dev, ClkRun);
		OUTL(dev, SavedClkRun & ~0x100, ClkRun);
	}
	return card_number;
}

/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
   The EEPROM code is for common 93c06/46 EEPROMs w/ 6bit addresses.  */

/* Delay between EEPROM clock transitions.
   No extra delay is needed with 33MHz PCI, but future 66MHz
   access may need a delay. */
#define eeprom_delay(ee_addr)	INL(dev, ee_addr)

enum EEPROM_Ctrl_Bits {
	EE_ShiftClk = 0x04,
	EE_DataIn = 0x01,
	EE_ChipSelect = 0x08,
	EE_DataOut = 0x02
};

#define EE_Write0 (EE_ChipSelect)
#define EE_Write1 (EE_ChipSelect | EE_DataIn)
/* The EEPROM commands include the alway-set leading bit. */
enum EEPROM_Cmds {
	EE_WrEnCmd = (4 << 6), EE_WriteCmd = (5 << 6),
	EE_ReadCmd = (6 << 6), EE_EraseCmd = (7 << 6),
};

#if 0
static void
write_eeprom(struct eth_device *dev, long addr, int location, short value)
{
	int i;
	int ee_addr = (typeof(ee_addr))addr;
	short wren_cmd = EE_WrEnCmd | 0x30; /*wren is 100 + 11XXXX*/
	short write_cmd = location | EE_WriteCmd;

#ifdef NATSEMI_DEBUG
	printf("write_eeprom: %08x, %04hx, %04hx\n",
		dev->iobase + ee_addr, write_cmd, value);
#endif
	/* Shift the write enable command bits out. */
	for (i = 9; i >= 0; i--) {
		short cmdval = (wren_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
		OUTL(dev, cmdval, ee_addr);
		eeprom_delay(ee_addr);
		OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
		eeprom_delay(ee_addr);
	}

	OUTL(dev, 0, ee_addr); /*bring chip select low*/
	OUTL(dev, EE_ShiftClk, ee_addr);
	eeprom_delay(ee_addr);

	/* Shift the write command bits out. */
	for (i = 9; i >= 0; i--) {
		short cmdval = (write_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
		OUTL(dev, cmdval, ee_addr);
		eeprom_delay(ee_addr);
		OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
		eeprom_delay(ee_addr);
	}

	for (i = 0; i < 16; i++) {
		short cmdval = (value & (1 << i)) ? EE_Write1 : EE_Write0;
		OUTL(dev, cmdval, ee_addr);
		eeprom_delay(ee_addr);
		OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
		eeprom_delay(ee_addr);
	}

	OUTL(dev, 0, ee_addr); /*bring chip select low*/
	OUTL(dev, EE_ShiftClk, ee_addr);
	for (i = 0; i < 200000; i++) {
		OUTL(dev, EE_Write0, ee_addr); /*poll for done*/
		if (INL(dev, ee_addr) & EE_DataOut) {
		    break; /*finished*/
		}
	}
	eeprom_delay(ee_addr);

	/* Terminate the EEPROM access. */
	OUTL(dev, EE_Write0, ee_addr);
	OUTL(dev, 0, ee_addr);
	return;
}
#endif

static int
read_eeprom(struct eth_device *dev, long addr, int location)
{
	int i;
	int retval = 0;
	int ee_addr = (typeof(ee_addr))addr;
	int read_cmd = location | EE_ReadCmd;

	OUTL(dev, EE_Write0, ee_addr);

	/* Shift the read command bits out. */
	for (i = 10; i >= 0; i--) {
		short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
		OUTL(dev, dataval, ee_addr);
		eeprom_delay(ee_addr);
		OUTL(dev, dataval | EE_ShiftClk, ee_addr);
		eeprom_delay(ee_addr);
	}
	OUTL(dev, EE_ChipSelect, ee_addr);
	eeprom_delay(ee_addr);

	for (i = 0; i < 16; i++) {
		OUTL(dev, EE_ChipSelect | EE_ShiftClk, ee_addr);
		eeprom_delay(ee_addr);
		retval |= (INL(dev, ee_addr) & EE_DataOut) ? 1 << i : 0;
		OUTL(dev, EE_ChipSelect, ee_addr);
		eeprom_delay(ee_addr);
	}

	/* Terminate the EEPROM access. */
	OUTL(dev, EE_Write0, ee_addr);
	OUTL(dev, 0, ee_addr);
#ifdef NATSEMI_DEBUG
	if (natsemi_debug)
		printf("read_eeprom: %08x, %08x, retval %08x\n",
			dev->iobase + ee_addr, read_cmd, retval);
#endif
	return retval;
}

/*  MII transceiver control section.
	The 83815 series has an internal transceiver, and we present the
	management registers as if they were MII connected. */

static int
mdio_read(struct eth_device *dev, int phy_id, int location)
{
	if (phy_id == 1 && location < 32)
		return INL(dev, BasicControl+(location<<2))&0xffff;
	else
		return 0xffff;
}

/* Function: natsemi_init
 *
 * Description: resets the ethernet controller chip and configures
 *    registers and data structures required for sending and receiving packets.
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * returns:	int.
 */

static int
natsemi_init(struct eth_device *dev, bd_t * bis)
{

	natsemi_reset(dev);

	/* Disable PME:
	 * The PME bit is initialized from the EEPROM contents.
	 * PCI cards probably have PME disabled, but motherboard
	 * implementations may have PME set to enable WakeOnLan.
	 * With PME set the chip will scan incoming packets but
	 * nothing will be written to memory. */
	OUTL(dev, SavedClkRun & ~0x100, ClkRun);

	natsemi_init_rxfilter(dev);
	natsemi_init_txd(dev);
	natsemi_init_rxd(dev);

	/* Configure the PCI bus bursts and FIFO thresholds. */
	tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 | (0x1002);
	rx_config = RxMxdma_256 | 0x20;

#ifdef NATSEMI_DEBUG
	printf("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config);
	printf("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config);
#endif
	OUTL(dev, tx_config, TxConfig);
	OUTL(dev, rx_config, RxConfig);

	natsemi_check_duplex(dev);
	natsemi_set_rx_mode(dev);

	OUTL(dev, (RxOn | TxOn), ChipCmd);
	return 1;
}

/*
 * Function: natsemi_reset
 *
 * Description: soft resets the controller chip
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * Returns:   void.
 */
static void
natsemi_reset(struct eth_device *dev)
{
	OUTL(dev, ChipReset, ChipCmd);

	/* On page 78 of the spec, they recommend some settings for "optimum
	   performance" to be done in sequence.  These settings optimize some
	   of the 100Mbit autodetection circuitry.  Also, we only want to do
	   this for rev C of the chip.  */
	if (INL(dev, SiliconRev) == 0x302) {
		OUTW(dev, 0x0001, PGSEL);
		OUTW(dev, 0x189C, PMDCSR);
		OUTW(dev, 0x0000, TSTDAT);
		OUTW(dev, 0x5040, DSPCFG);
		OUTW(dev, 0x008C, SDCFG);
	}
	/* Disable interrupts using the mask. */
	OUTL(dev, 0, IntrMask);
	OUTL(dev, 0, IntrEnable);
}

/* Function: natsemi_init_rxfilter
 *
 * Description: sets receive filter address to our MAC address
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * returns:   void.
 */

static void
natsemi_init_rxfilter(struct eth_device *dev)
{
	int i;

	for (i = 0; i < ETH_ALEN; i += 2) {
		OUTL(dev, i, RxFilterAddr);
		OUTW(dev, dev->enetaddr[i] + (dev->enetaddr[i + 1] << 8),
		     RxFilterData);
	}
}

/*
 * Function: natsemi_init_txd
 *
 * Description: initializes the Tx descriptor
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * returns:   void.
 */

static void
natsemi_init_txd(struct eth_device *dev)
{
	txd.link = (u32) 0;
	txd.cmdsts = (u32) 0;
	txd.bufptr = (u32) & txb[0];

	/* load Transmit Descriptor Register */
	OUTL(dev, (u32) & txd, TxRingPtr);
#ifdef NATSEMI_DEBUG
	printf("natsemi_init_txd: TX descriptor reg loaded with: %#08X\n",
	       INL(dev, TxRingPtr));
#endif
}

/* Function: natsemi_init_rxd
 *
 * Description: initializes the Rx descriptor ring
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * Returns:   void.
 */

static void
natsemi_init_rxd(struct eth_device *dev)
{
	int i;

	cur_rx = 0;

	/* init RX descriptor */
	for (i = 0; i < NUM_RX_DESC; i++) {
		rxd[i].link =
		    cpu_to_le32((i + 1 <
				 NUM_RX_DESC) ? (u32) & rxd[i +
							    1] : (u32) &
				rxd[0]);
		rxd[i].cmdsts = cpu_to_le32((u32) RX_BUF_SIZE);
		rxd[i].bufptr = cpu_to_le32((u32) & rxb[i * RX_BUF_SIZE]);
#ifdef NATSEMI_DEBUG
		printf
		    ("natsemi_init_rxd: rxd[%d]=%p link=%X cmdsts=%lX bufptr=%X\n",
			i, &rxd[i], le32_to_cpu(rxd[i].link),
				rxd[i].cmdsts, rxd[i].bufptr);
#endif
	}

	/* load Receive Descriptor Register */
	OUTL(dev, (u32) & rxd[0], RxRingPtr);

#ifdef NATSEMI_DEBUG
	printf("natsemi_init_rxd: RX descriptor register loaded with: %X\n",
	       INL(dev, RxRingPtr));
#endif
}

/* Function: natsemi_set_rx_mode
 *
 * Description:
 *    sets the receive mode to accept all broadcast packets and packets
 *    with our MAC address, and reject all multicast packets.
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * Returns:   void.
 */

static void
natsemi_set_rx_mode(struct eth_device *dev)
{
	u32 rx_mode = AcceptBroadcast | AcceptMyPhys;

	OUTL(dev, rx_mode, RxFilterAddr);
}

static void
natsemi_check_duplex(struct eth_device *dev)
{
	int duplex = INL(dev, ChipConfig) & FullDuplex ? 1 : 0;

#ifdef NATSEMI_DEBUG
	printf("%s: Setting %s-duplex based on negotiated link"
	       " capability.\n", dev->name, duplex ? "full" : "half");
#endif
	if (duplex) {
		rx_config |= RxAcceptTx;
		tx_config |= (TxCarrierIgn | TxHeartIgn);
	} else {
		rx_config &= ~RxAcceptTx;
		tx_config &= ~(TxCarrierIgn | TxHeartIgn);
	}
	OUTL(dev, tx_config, TxConfig);
	OUTL(dev, rx_config, RxConfig);
}

/* Function: natsemi_send
 *
 * Description: transmits a packet and waits for completion or timeout.
 *
 * Returns:   void.  */
static int natsemi_send(struct eth_device *dev, void *packet, int length)
{
	u32 i, status = 0;
	u32 tx_status = 0;
	u32 *tx_ptr = &tx_status;
	vu_long *res = (vu_long *)tx_ptr;

	/* Stop the transmitter */
	OUTL(dev, TxOff, ChipCmd);

#ifdef NATSEMI_DEBUG
	if (natsemi_debug)
		printf("natsemi_send: sending %d bytes\n", (int) length);
#endif

	/* set the transmit buffer descriptor and enable Transmit State Machine */
	txd.link = cpu_to_le32(0);
	txd.bufptr = cpu_to_le32(phys_to_bus((u32) packet));
	txd.cmdsts = cpu_to_le32(DescOwn | length);

	/* load Transmit Descriptor Register */
	OUTL(dev, phys_to_bus((u32) & txd), TxRingPtr);
#ifdef NATSEMI_DEBUG
	if (natsemi_debug)
	    printf("natsemi_send: TX descriptor register loaded with: %#08X\n",
	     INL(dev, TxRingPtr));
#endif
	/* restart the transmitter */
	OUTL(dev, TxOn, ChipCmd);

	for (i = 0;
	     (*res = le32_to_cpu(txd.cmdsts)) & DescOwn;
	     i++) {
		if (i >= TOUT_LOOP) {
			printf
			    ("%s: tx error buffer not ready: txd.cmdsts == %#X\n",
			     dev->name, tx_status);
			goto Done;
		}
	}

	if (!(tx_status & DescPktOK)) {
		printf("natsemi_send: Transmit error, Tx status %X.\n",
		       tx_status);
		goto Done;
	}

	status = 1;
      Done:
	return status;
}

/* Function: natsemi_poll
 *
 * Description: checks for a received packet and returns it if found.
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * Returns:   1 if    packet was received.
 *            0 if no packet was received.
 *
 * Side effects:
 *            Returns (copies) the packet to the array dev->packet.
 *            Returns the length of the packet.
 */

static int
natsemi_poll(struct eth_device *dev)
{
	int retstat = 0;
	int length = 0;
	u32 rx_status = le32_to_cpu(rxd[cur_rx].cmdsts);

	if (!(rx_status & (u32) DescOwn))
		return retstat;
#ifdef NATSEMI_DEBUG
	if (natsemi_debug)
		printf("natsemi_poll: got a packet: cur_rx:%d, status:%X\n",
		       cur_rx, rx_status);
#endif
	length = (rx_status & DSIZE) - CRC_SIZE;

	if ((rx_status & (DescMore | DescPktOK | DescRxLong)) != DescPktOK) {
		printf
		    ("natsemi_poll: Corrupted packet received, buffer status = %X\n",
		     rx_status);
		retstat = 0;
	} else {		/* give packet to higher level routine */
		NetReceive((rxb + cur_rx * RX_BUF_SIZE), length);
		retstat = 1;
	}

	/* return the descriptor and buffer to receive ring */
	rxd[cur_rx].cmdsts = cpu_to_le32(RX_BUF_SIZE);
	rxd[cur_rx].bufptr = cpu_to_le32((u32) & rxb[cur_rx * RX_BUF_SIZE]);

	if (++cur_rx == NUM_RX_DESC)
		cur_rx = 0;

	/* re-enable the potentially idle receive state machine */
	OUTL(dev, RxOn, ChipCmd);

	return retstat;
}

/* Function: natsemi_disable
 *
 * Description: Turns off interrupts and stops Tx and Rx engines
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * Returns:   void.
 */

static void
natsemi_disable(struct eth_device *dev)
{
	/* Disable interrupts using the mask. */
	OUTL(dev, 0, IntrMask);
	OUTL(dev, 0, IntrEnable);

	/* Stop the chip's Tx and Rx processes. */
	OUTL(dev, RxOff | TxOff, ChipCmd);

	/* Restore PME enable bit */
	OUTL(dev, SavedClkRun, ClkRun);
}
OpenPOWER on IntegriCloud