/* * (C) Copyright 2007 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * Author: Igor Lisitsin * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include /* * UART test * * The controllers are configured to loopback mode and several * characters are transmitted. */ #ifdef CONFIG_POST #include #if CONFIG_POST & CFG_POST_UART /* * This table defines the UART's that should be tested and can * be overridden in the board config file */ #ifndef CFG_POST_UART_TABLE #define CFG_POST_UART_TABLE {UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE} #endif #include #include #if defined(CONFIG_440) #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300 #define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400 #define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000500 #define UART3_BASE CFG_PERIPHERAL_BASE + 0x00000600 #else #define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200 #define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300 #endif #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600 #endif #if defined(CONFIG_440GP) #define CR0_MASK 0x3fff0000 #define CR0_EXTCLK_ENA 0x00600000 #define CR0_UDIV_POS 16 #define UDIV_SUBTRACT 1 #define UART0_SDR cntrl0 #define MFREG(a, d) d = mfdcr(a) #define MTREG(a, d) mtdcr(a, d) #else /* #if defined(CONFIG_440GP) */ /* all other 440 PPC's access clock divider via sdr register */ #define CR0_MASK 0xdfffffff #define CR0_EXTCLK_ENA 0x00800000 #define CR0_UDIV_POS 0 #define UDIV_SUBTRACT 0 #define UART0_SDR sdr_uart0 #define UART1_SDR sdr_uart1 #if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \ defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPe) #define UART2_SDR sdr_uart2 #endif #if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \ defined(CONFIG_440GR) || defined(CONFIG_440GRx) #define UART3_SDR sdr_uart3 #endif #define MFREG(a, d) mfsdr(a, d) #define MTREG(a, d) mtsdr(a, d) #endif /* #if defined(CONFIG_440GP) */ #elif defined(CONFIG_405EP) || defined(CONFIG_405EZ) #define UART0_BASE 0xef600300 #define UART1_BASE 0xef600400 #define UCR0_MASK 0x0000007f #define UCR1_MASK 0x00007f00 #define UCR0_UDIV_POS 0 #define UCR1_UDIV_POS 8 #define UDIV_MAX 127 #else /* CONFIG_405GP || CONFIG_405CR */ #define UART0_BASE 0xef600300 #define UART1_BASE 0xef600400 #define CR0_MASK 0x00001fff #define CR0_EXTCLK_ENA 0x000000c0 #define CR0_UDIV_POS 1 #define UDIV_MAX 32 #endif #define UART_RBR 0x00 #define UART_THR 0x00 #define UART_IER 0x01 #define UART_IIR 0x02 #define UART_FCR 0x02 #define UART_LCR 0x03 #define UART_MCR 0x04 #define UART_LSR 0x05 #define UART_MSR 0x06 #define UART_SCR 0x07 #define UART_DLL 0x00 #define UART_DLM 0x01 /* * Line Status Register. */ #define asyncLSRDataReady1 0x01 #define asyncLSROverrunError1 0x02 #define asyncLSRParityError1 0x04 #define asyncLSRFramingError1 0x08 #define asyncLSRBreakInterrupt1 0x10 #define asyncLSRTxHoldEmpty1 0x20 #define asyncLSRTxShiftEmpty1 0x40 #define asyncLSRRxFifoError1 0x80 DECLARE_GLOBAL_DATA_PTR; <<<<<<< master #if !defined(CFG_EXT_SERIAL_CLOCK) static void serial_divs (int baudrate, unsigned long *pudiv, unsigned short *pbdiv) { sys_info_t sysinfo; unsigned long div; /* total divisor udiv * bdiv */ unsigned long umin; /* minimum udiv */ unsigned short diff; /* smallest diff */ unsigned long udiv; /* best udiv */ unsigned short idiff; /* current diff */ unsigned short ibdiv; /* current bdiv */ unsigned long i; unsigned long est; /* current estimate */ get_sys_info(&sysinfo); udiv = 32; /* Assume lowest possible serial clk */ div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */ umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */ diff = 32; /* highest possible */ /* i is the test udiv value -- start with the largest * possible (32) to minimize serial clock and constrain * search to umin. */ for (i = 32; i > umin; i--) { ibdiv = div / i; est = i * ibdiv; idiff = (est > div) ? (est-div) : (div-est); if (idiff == 0) { udiv = i; break; /* can't do better */ } else if (idiff < diff) { udiv = i; /* best so far */ diff = idiff; /* update lowest diff*/ } } *pudiv = udiv; *pbdiv = div / udiv; } #endif ======= #if defined(CONFIG_440) >>>>>>> zeus static int uart_post_init (unsigned long dev_base) { unsigned long reg; unsigned long udiv; unsigned short bdiv; volatile char val; #ifdef CFG_EXT_SERIAL_CLOCK unsigned long tmp; #endif int i; for (i = 0; i < 3500; i++) { if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1) break; udelay (100); } MFREG(UART0_SDR, reg); reg &= ~CR0_MASK; #ifdef CFG_EXT_SERIAL_CLOCK reg |= CR0_EXTCLK_ENA; udiv = 1; tmp = gd->baudrate * 16; bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp; #else /* For 440, the cpu clock is on divider chain A, UART on divider * chain B ... so cpu clock is irrelevant. Get the "optimized" * values that are subject to the 1/2 opb clock constraint */ serial_divs (gd->baudrate, &udiv, &bdiv); #endif reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */ /* * Configure input clock to baudrate generator for all * available serial ports here */ MTREG(UART0_SDR, reg); #if defined(UART1_SDR) MTREG(UART1_SDR, reg); #endif #if defined(UART2_SDR) MTREG(UART2_SDR, reg); #endif #if defined(UART3_SDR) MTREG(UART3_SDR, reg); #endif out8(dev_base + UART_LCR, 0x80); /* set DLAB bit */ out8(dev_base + UART_DLL, bdiv); /* set baudrate divisor */ out8(dev_base + UART_DLM, bdiv >> 8); /* set baudrate divisor */ out8(dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ out8(dev_base + UART_FCR, 0x00); /* disable FIFO */ out8(dev_base + UART_MCR, 0x10); /* enable loopback mode */ val = in8(dev_base + UART_LSR); /* clear line status */ val = in8(dev_base + UART_RBR); /* read receive buffer */ out8(dev_base + UART_SCR, 0x00); /* set scratchpad */ out8(dev_base + UART_IER, 0x00); /* set interrupt enable reg */ return 0; } #else /* CONFIG_440 */ static int uart_post_init (unsigned long dev_base) { unsigned long reg; unsigned long tmp; unsigned long clk; unsigned long udiv; unsigned short bdiv; volatile char val; int i; for (i = 0; i < 3500; i++) { if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1) break; udelay (100); } #if defined(CONFIG_405EZ) serial_divs(gd->baudrate, &udiv, &bdiv); clk = tmp = reg = 0; #else #ifdef CONFIG_405EP reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK); clk = gd->cpu_clk; tmp = CFG_BASE_BAUD * 16; udiv = (clk + tmp / 2) / tmp; if (udiv > UDIV_MAX) /* max. n bits for udiv */ udiv = UDIV_MAX; reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */ reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */ mtdcr (cpc0_ucr, reg); #else /* CONFIG_405EP */ reg = mfdcr(cntrl0) & ~CR0_MASK; #ifdef CFG_EXT_SERIAL_CLOCK clk = CFG_EXT_SERIAL_CLOCK; udiv = 1; reg |= CR0_EXTCLK_ENA; #else clk = gd->cpu_clk; #ifdef CFG_405_UART_ERRATA_59 udiv = 31; /* Errata 59: stuck at 31 */ #else tmp = CFG_BASE_BAUD * 16; udiv = (clk + tmp / 2) / tmp; if (udiv > UDIV_MAX) /* max. n bits for udiv */ udiv = UDIV_MAX; #endif #endif reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */ mtdcr (cntrl0, reg); #endif /* CONFIG_405EP */ tmp = gd->baudrate * udiv * 16; bdiv = (clk + tmp / 2) / tmp; #endif /* CONFIG_405EZ */ out8(dev_base + UART_LCR, 0x80); /* set DLAB bit */ out8(dev_base + UART_DLL, bdiv); /* set baudrate divisor */ out8(dev_base + UART_DLM, bdiv >> 8); /* set baudrate divisor */ out8(dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ out8(dev_base + UART_FCR, 0x00); /* disable FIFO */ out8(dev_base + UART_MCR, 0x10); /* enable loopback mode */ val = in8(dev_base + UART_LSR); /* clear line status */ val = in8(dev_base + UART_RBR); /* read receive buffer */ out8(dev_base + UART_SCR, 0x00); /* set scratchpad */ out8(dev_base + UART_IER, 0x00); /* set interrupt enable reg */ return (0); } #endif /* CONFIG_440 */ static void uart_post_putc (unsigned long dev_base, char c) { int i; out8 (dev_base + UART_THR, c); /* put character out */ /* Wait for transfer completion */ for (i = 0; i < 3500; i++) { if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1) break; udelay (100); } } static int uart_post_getc (unsigned long dev_base) { int i; /* Wait for character available */ for (i = 0; i < 3500; i++) { if (in8 (dev_base + UART_LSR) & asyncLSRDataReady1) break; udelay (100); } return 0xff & in8 (dev_base + UART_RBR); } static int test_ctlr (unsigned long dev_base, int index) { int res = -1; char test_str[] = "*** UART Test String ***\r\n"; int i; uart_post_init (dev_base); for (i = 0; i < sizeof (test_str) - 1; i++) { uart_post_putc (dev_base, test_str[i]); if (uart_post_getc (dev_base) != test_str[i]) goto done; } res = 0; done: if (res) post_log ("uart%d test failed\n", index); return res; } int uart_post_test (int flags) { int i, res = 0; static unsigned long base[] = CFG_POST_UART_TABLE; for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) { if (test_ctlr (base[i], i)) res = -1; } serial_reinit_all (); return res; } #endif /* CONFIG_POST & CFG_POST_UART */ #endif /* CONFIG_POST */