/* * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com * * Developed for DENX Software Engineering GmbH * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include /* This test performs testing of FPGA SCRATCH register, * gets FPGA version and run get_ram_size() on FPGA memory */ #include #include DECLARE_GLOBAL_DATA_PTR; #define FPGA_SCRATCH_REG 0xC4000050 #define FPGA_VERSION_REG 0xC4000040 #define FPGA_RAM_START 0xC4200000 #define FPGA_RAM_END 0xC4203FFF #define FPGA_STAT 0xC400000C #if CONFIG_POST & CFG_POST_BSPEC3 static int one_scratch_test(uint value) { uint read_value; int ret = 0; out_be32((void *)FPGA_SCRATCH_REG, value); /* read other location (protect against data lines capacity) */ ret = in_be16((void *)FPGA_VERSION_REG); /* verify test pattern */ read_value = in_be32((void *)FPGA_SCRATCH_REG); if (read_value != value) { post_log("FPGA SCRATCH test failed write %08X, read %08X\n", value, read_value); ret = 1; } return ret; } /* Verify FPGA, get version & memory size */ int fpga_post_test(int flags) { uint old_value; ushort version; uint read_value; int ret = 0; post_log("\n"); old_value = in_be32((void *)FPGA_SCRATCH_REG); if (one_scratch_test(0x55555555)) ret = 1; if (one_scratch_test(0xAAAAAAAA)) ret = 1; out_be32((void *)FPGA_SCRATCH_REG, old_value); version = in_be16((void *)FPGA_VERSION_REG); post_log("FPGA : version %u.%u\n", (version >> 8) & 0xFF, version & 0xFF); /* Enable write to FPGA RAM */ out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) | 0x1000); read_value = get_ram_size((void *)CFG_FPGA_BASE_1, 0x4000); post_log("FPGA RAM size: %d bytes\n", read_value); return ret; } #endif /* CONFIG_POST & CFG_POST_BSPEC3 */