/* * Copyright (C) 2013 Mike Dunn * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __DOCG4_H__ #define __DOCG4_H__ #include #include extern int docg4_nand_init(struct mtd_info *mtd, struct nand_chip *nand, int devnum); /* SPL-related definitions */ #define DOCG4_IPL_LOAD_BLOCK_COUNT 2 /* number of blocks that IPL loads */ #define DOCG4_BLOCK_CAPACITY_SPL 0x10000 /* reliable mode; redundant pages */ #define DOC_IOSPACE_DATA 0x0800 /* register offsets */ #define DOC_CHIPID 0x1000 #define DOC_DEVICESELECT 0x100a #define DOC_ASICMODE 0x100c #define DOC_DATAEND 0x101e #define DOC_NOP 0x103e #define DOC_FLASHSEQUENCE 0x1032 #define DOC_FLASHCOMMAND 0x1034 #define DOC_FLASHADDRESS 0x1036 #define DOC_FLASHCONTROL 0x1038 #define DOC_ECCCONF0 0x1040 #define DOC_ECCCONF1 0x1042 #define DOC_HAMMINGPARITY 0x1046 #define DOC_BCH_SYNDROM(idx) (0x1048 + idx) #define DOC_ASICMODECONFIRM 0x1072 #define DOC_CHIPID_INV 0x1074 #define DOC_POWERMODE 0x107c #define DOCG4_MYSTERY_REG 0x1050 /* apparently used only to write oob bytes 6 and 7 */ #define DOCG4_OOB_6_7 0x1052 /* DOC_FLASHSEQUENCE register commands */ #define DOC_SEQ_RESET 0x00 #define DOCG4_SEQ_PAGE_READ 0x03 #define DOCG4_SEQ_FLUSH 0x29 #define DOCG4_SEQ_PAGEWRITE 0x16 #define DOCG4_SEQ_PAGEPROG 0x1e #define DOCG4_SEQ_BLOCKERASE 0x24 /* DOC_FLASHCOMMAND register commands */ #define DOCG4_CMD_PAGE_READ 0x00 #define DOC_CMD_ERASECYCLE2 0xd0 #define DOCG4_CMD_FLUSH 0x70 #define DOCG4_CMD_READ2 0x30 #define DOC_CMD_PROG_BLOCK_ADDR 0x60 #define DOCG4_CMD_PAGEWRITE 0x80 #define DOC_CMD_PROG_CYCLE2 0x10 #define DOC_CMD_RESET 0xff /* DOC_POWERMODE register bits */ #define DOC_POWERDOWN_READY 0x80 /* DOC_FLASHCONTROL register bits */ #define DOC_CTRL_CE 0x10 #define DOC_CTRL_UNKNOWN 0x40 #define DOC_CTRL_FLASHREADY 0x01 /* DOC_ECCCONF0 register bits */ #define DOC_ECCCONF0_READ_MODE 0x8000 #define DOC_ECCCONF0_UNKNOWN 0x2000 #define DOC_ECCCONF0_ECC_ENABLE 0x1000 #define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff /* DOC_ECCCONF1 register bits */ #define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80 #define DOC_ECCCONF1_ECC_ENABLE 0x07 #define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20 /* DOC_ASICMODE register bits */ #define DOC_ASICMODE_RESET 0x00 #define DOC_ASICMODE_NORMAL 0x01 #define DOC_ASICMODE_POWERDOWN 0x02 #define DOC_ASICMODE_MDWREN 0x04 #define DOC_ASICMODE_BDETCT_RESET 0x08 #define DOC_ASICMODE_RSTIN_RESET 0x10 #define DOC_ASICMODE_RAM_WE 0x20 /* good status values read after read/write/erase operations */ #define DOCG4_PROGSTATUS_GOOD 0x51 #define DOCG4_PROGSTATUS_GOOD_2 0xe0 /* * On read operations (page and oob-only), the first byte read from I/O reg is a * status. On error, it reads 0x73; otherwise, it reads either 0x71 (first read * after reset only) or 0x51, so bit 1 is presumed to be an error indicator. */ #define DOCG4_READ_ERROR 0x02 /* bit 1 indicates read error */ /* anatomy of the device */ #define DOCG4_CHIP_SIZE 0x8000000 #define DOCG4_PAGE_SIZE 0x200 #define DOCG4_PAGES_PER_BLOCK 0x200 #define DOCG4_BLOCK_SIZE (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE) #define DOCG4_NUMBLOCKS (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE) #define DOCG4_OOB_SIZE 0x10 #define DOCG4_CHIP_SHIFT 27 /* log_2(DOCG4_CHIP_SIZE) */ #define DOCG4_PAGE_SHIFT 9 /* log_2(DOCG4_PAGE_SIZE) */ #define DOCG4_ERASE_SHIFT 18 /* log_2(DOCG4_BLOCK_SIZE) */ /* all but the last byte is included in ecc calculation */ #define DOCG4_BCH_SIZE (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1) #define DOCG4_USERDATA_LEN 520 /* 512 byte page plus 8 oob avail to user */ /* expected values from the ID registers */ #define DOCG4_IDREG1_VALUE 0x0400 #define DOCG4_IDREG2_VALUE 0xfbff /* primitive polynomial used to build the Galois field used by hw ecc gen */ #define DOCG4_PRIMITIVE_POLY 0x4443 #define DOCG4_M 14 /* Galois field is of order 2^14 */ #define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */ #define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */ #endif /* __DOCG4_H__ */