/* * Copyright (C) 2013 Seco S.r.l * * Configuration settings for the Seco Boards. * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H #include "mx6_common.h" #define CONFIG_BOARD_REVISION_TAG /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART2_BASE /* Command definition */ #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) /* MMC Configuration */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 /* Ethernet Configuration */ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII #define CONFIG_CMD_NET #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_XCV_TYPE RGMII #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_MXC_PHYADDR 6 #define CONFIG_PHYLIB #define CONFIG_PHY_MICREL #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "ethprime=FEC0\0" \ "netdev=eth0\0" \ "ethprime=FEC0\0" \ "uboot=u-boot.bin\0" \ "kernel=uImage\0" \ "nfsroot=/opt/eldk/arm\0" \ "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \ "ip_server=10.0.0.1\0" \ "nfs_path=/targetfs \0" \ "memory=mem=1024M\0" \ "bootdev=mmc dev 0; ext2load mmc 0:1\0" \ "root=root=/dev/mmcblk0p1\0" \ "option=rootwait rw fixrtc rootflags=barrier=1\0" \ "cpu_freq=arm_freq=996\0" \ "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \ " ${option} ${memory} ${cpu_freq}\0" \ "setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \ " root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \ " nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \ " ${memory} ${cpu_freq}\0" \ "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \ "bootcmd=run setbootargs; run setbootdev; run boot_dev;" \ " bootm 0x10800000\0" \ "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" /* Miscellaneous configurable options */ #define CONFIG_SYS_PROMPT "SECO MX6Q uQ7 U-Boot > " /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_HZ 1000 /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Environment organization */ #define CONFIG_ENV_SIZE (8 * 1024) #if defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_ENV_OFFSET (6 * 128 * 1024) #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_DYNAMIC_MMC_DEVNO #endif #endif /* __CONFIG_H */