/* * Palm Treo 680 configuration file * * Copyright (C) 2013 Mike Dunn * * This file is released under the terms of GPL v2 and any later version. * See the file COPYING in the root directory of the source tree for details. * */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Board Configuration Options */ #define CONFIG_CPU_PXA27X #define CONFIG_PALMTREO680 #define CONFIG_MACH_TYPE MACH_TYPE_TREO680 #define CONFIG_SYS_MALLOC_LEN (4096*1024) #define CONFIG_LZMA /* * Serial Console Configuration */ #define CONFIG_PXA_SERIAL #define CONFIG_FFUART 1 #define CONFIG_BAUDRATE 9600 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_CONS_INDEX 3 /* we have nand (although technically nand *is* flash...) */ #define CONFIG_SYS_NO_FLASH #define CONFIG_LCD /* #define CONFIG_KEYBOARD */ /* TODO */ /* * Bootloader Components Configuration */ #include #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_NFS #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_SETGETDCR #undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_XIMG #define CONFIG_CMD_ENV #define CONFIG_CMD_MMC #define CONFIG_CMD_NAND #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS /* * MMC Card Configuration */ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_PXA_MMC_GENERIC #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #endif /* * LCD */ #ifdef CONFIG_LCD #define CONFIG_PXA_LCD #define CONFIG_ACX544AKN #define CONFIG_LCD_LOGO #define CONFIG_SYS_LCD_PXA_NO_L_BIAS /* don't configure GPIO77 as L_BIAS */ #define LCD_BPP LCD_COLOR16 #define CONFIG_FB_ADDR 0x5c000000 /* internal SRAM */ #define CONFIG_CMD_BMP #define CONFIG_SPLASH_SCREEN /* requires "splashimage" env var */ #define CONFIG_SPLASH_SCREEN_ALIGN /* requires "splashpos" env var */ #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) #endif /* * KGDB */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ #endif /* * HUSH Shell Configuration */ #define CONFIG_SYS_HUSH_PARSER 1 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_LONGHELP #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " #else #endif #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_DEVICE_NULLDEV 1 /* * Clock Configuration */ #define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ /* * Stack sizes */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ #endif /* * DRAM Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ #define CONFIG_SYS_DRAM_BASE 0xa0000000 #define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */ #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* * GPIO settings */ #define CONFIG_SYS_GAFR0_L_VAL 0x0E000000 #define CONFIG_SYS_GAFR0_U_VAL 0xA500001A #define CONFIG_SYS_GAFR1_L_VAL 0x60000002 #define CONFIG_SYS_GAFR1_U_VAL 0xAAA07959 #define CONFIG_SYS_GAFR2_L_VAL 0x02AAAAAA #define CONFIG_SYS_GAFR2_U_VAL 0x41440F08 #define CONFIG_SYS_GAFR3_L_VAL 0x56AA95FF #define CONFIG_SYS_GAFR3_U_VAL 0x00001401 #define CONFIG_SYS_GPCR0_VAL 0x1FF80400 #define CONFIG_SYS_GPCR1_VAL 0x03003FC1 #define CONFIG_SYS_GPCR2_VAL 0x01C1E000 #define CONFIG_SYS_GPCR3_VAL 0x01C1E000 #define CONFIG_SYS_GPDR0_VAL 0xCFF90400 #define CONFIG_SYS_GPDR1_VAL 0xFB22BFC1 #define CONFIG_SYS_GPDR2_VAL 0x93CDFFDF #define CONFIG_SYS_GPDR3_VAL 0x0069FF81 #define CONFIG_SYS_GPSR0_VAL 0x02000018 #define CONFIG_SYS_GPSR1_VAL 0x00000000 #define CONFIG_SYS_GPSR2_VAL 0x000C0000 #define CONFIG_SYS_GPSR3_VAL 0x00080000 #define CONFIG_SYS_PSSR_VAL 0x30 /* * Clock settings */ #define CONFIG_SYS_CKEN 0x01ffffff #define CONFIG_SYS_CCCR 0x02000210 /* * Memory settings */ #define CONFIG_SYS_MSC0_VAL 0x7ff844c8 #define CONFIG_SYS_MSC1_VAL 0x7ff86ab4 #define CONFIG_SYS_MSC2_VAL 0x7ff87ff8 #define CONFIG_SYS_MDCNFG_VAL 0x0B880acd #define CONFIG_SYS_MDREFR_VAL 0x201fa031 #define CONFIG_SYS_MDMRS_VAL 0x00320032 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 #define CONFIG_SYS_SXCNFG_VAL 0x40044004 #define CONFIG_SYS_MECR_VAL 0x00000003 #define CONFIG_SYS_MCMEM0_VAL 0x0001c391 #define CONFIG_SYS_MCMEM1_VAL 0x0001c391 #define CONFIG_SYS_MCATT0_VAL 0x0001c391 #define CONFIG_SYS_MCATT1_VAL 0x0001c391 #define CONFIG_SYS_MCIO0_VAL 0x00014611 #define CONFIG_SYS_MCIO1_VAL 0x0001c391 /* * USB */ #define CONFIG_USB_DEVICE #define CONFIG_USB_TTY #define CONFIG_USB_DEV_PULLUP_GPIO 114 /* * SPL */ #define CONFIG_SPL_TEXT_BASE 0xa1700000 /* IPL loads SPL here */ #define CONFIG_SPL_STACK 0x5c040000 /* end of internal SRAM */ #define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */ #define CONFIG_SPL_NAND_DOCG4 /* use lean docg4 nand spl driver */ #define CONFIG_SPL_LIBGENERIC_SUPPORT /* spl uses memcpy */ /* * NAND */ #define CONFIG_NAND_DOCG4 #define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* only one device */ #define CONFIG_SYS_NAND_BASE 0x00000000 /* mapped to reset vector */ #define CONFIG_SYS_NAND_PAGE_SIZE 0x200 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 #define CONFIG_BITREVERSE /* needed by docg4 driver */ #define CONFIG_BCH /* needed by docg4 driver */ /* * IMPORTANT NOTE: this is the size of the concatenated spl + u-boot image. It * will be rounded up to the next 64k boundary (the spl flash block size), so it * does not have to be exact, but you must ensure that it is not less than the * actual image size, or it may fail to boot (bricked phone)! * (Tip: reduces to three blocks with lcd and mmc support removed from u-boot.) */ #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 /* four 64k flash blocks */ /* * This is the byte offset into the flash at which the concatenated spl + u-boot * image is placed. It must be at the start of a block (256k boundary). Blocks * 0 - 5 are write-protected, so we start at block 6. */ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x180000 /* block 6 */ /* DRAM address to which u-boot proper is loaded (before it relocates itself) */ #define CONFIG_SYS_NAND_U_BOOT_DST 0xa0000000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* passed to linker by Makefile as arg to -Ttext option */ #define CONFIG_SYS_TEXT_BASE 0xa0000000 #define CONFIG_SYS_INIT_SP_ADDR 0x5c040000 /* end of internal SRAM */ /* * environment */ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_BUILD_ENVCRC #define CONFIG_ENV_SIZE 0x200 #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_EXTRA_ENV_SETTINGS \ "stdin=usbtty\0" \ "stdout=usbtty\0" \ "stderr=usbtty" #define CONFIG_BOOTARGS "mtdparts=Msys_Diskonchip_G4:1536k(protected_part)ro,1024k(bootloader_part),-(filesys_part) \ ip=192.168.11.102:::255.255.255.0:treo:usb0" #define CONFIG_BOOTDELAY 3 #if 0 /* example: try 2nd mmc partition, then nand */ #define CONFIG_BOOTCOMMAND \ "mmc rescan; " \ "if mmcinfo && ext2load mmc 0:2 0xa1000000 uImage; then " \ "bootm 0xa1000000; " \ "elif nand read 0xa1000000 0x280000 0x240000; then " \ "bootm 0xa1000000; " \ "fi; " #endif /* u-boot lives at end of SDRAM, so use start of SDRAM for stand alone apps */ #define CONFIG_STANDALONE_LOAD_ADDR 0xa0000000 #define CONFIG_SYS_DCACHE_OFF #define CONFIG_SYS_ICACHE_OFF #endif /* __CONFIG_H */