/* * (C) Copyright 2003 * Texas Instruments. * Kshitij Gupta * Configuation settings for the TI OMAP Innovator board. * * (C) Copyright 2004 * ARM Ltd. * Philippe Robin, * Configuration for Compact Integrator board. * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H #include "integrator-common.h" /* Integrator CP-specific configuration */ #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ /* * Hardware drivers */ #define CONFIG_SMC91111 #define CONFIG_SMC_USE_32_BIT #define CONFIG_SMC91111_BASE 0xC8000000 #undef CONFIG_SMC91111_EXT_PHY /* PL011 configuration */ #define CONFIG_PL011_SERIAL #define CONFIG_PL011_CLOCK 14745600 #define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 } #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 #define CONFIG_SYS_SERIAL0 0x16000000 #define CONFIG_SYS_SERIAL1 0x17000000 /* * Command line configuration. */ #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" #define CONFIG_BOOTCOMMAND "tftpboot ; bootm" #define CONFIG_SERVERIP 192.168.1.100 #define CONFIG_IPADDR 192.168.1.104 #define CONFIG_BOOTFILE "uImage" /* * Miscellaneous configurable options */ #define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */ #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ #define CONFIG_SYS_MAX_FLASH_SECT 64 #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_SYS_MONITOR_LEN 0x00100000 /* * Move up the U-Boot & monitor area if more flash is fitted. * If this U-Boot is to be run on Integrators with varying flash sizes, * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not * embedded in the boot monitor(s) area */ #if ( PHYS_FLASH_SIZE == 0x04000000 ) #define CONFIG_ENV_ADDR 0x27F00000 #define CONFIG_SYS_MONITOR_BASE 0x27F40000 #elif (PHYS_FLASH_SIZE == 0x02000000 ) #define CONFIG_ENV_ADDR 0x25F00000 #define CONFIG_SYS_MONITOR_BASE 0x25F40000 #else #define CONFIG_ENV_ADDR 0x24F00000 #define CONFIG_SYS_MONITOR_BASE 0x27F40000 #endif #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ #define CONFIG_ENV_SIZE 8192 /* 8KB */ #endif /* __CONFIG_H */