/* * U-boot - Configuration file for Cirrus Logic EDB93xx boards */ #ifndef __CONFIG_H #define __CONFIG_H #ifdef CONFIG_MK_edb9301 #define CONFIG_EDB9301 #elif defined(CONFIG_MK_edb9302) #define CONFIG_EDB9302 #elif defined(CONFIG_MK_edb9302a) #define CONFIG_EDB9302A #elif defined(CONFIG_MK_edb9307) #define CONFIG_EDB9307 #elif defined(CONFIG_MK_edb9307a) #define CONFIG_EDB9307A #elif defined(CONFIG_MK_edb9312) #define CONFIG_EDB9312 #elif defined(CONFIG_MK_edb9315) #define CONFIG_EDB9315 #elif defined(CONFIG_MK_edb9315a) #define CONFIG_EDB9315A #else #error "no board defined" #endif /* Initial environment and monitor configuration options. */ #define CONFIG_BOOTDELAY 2 #define CONFIG_CMDLINE_TAG 1 #define CONFIG_INITRD_TAG 1 #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp" #define CONFIG_BOOTFILE "edb93xx.img" #define CONFIG_SYS_HUSH_PARSER 1 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_LDSCRIPT "board/cirrus/edb93xx/u-boot.lds" #ifdef CONFIG_EDB9301 #define CONFIG_EP9301 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9301 #define CONFIG_SYS_PROMPT "EDB9301> " #define CONFIG_ENV_SECT_SIZE 0x00020000 #elif defined(CONFIG_EDB9302) #define CONFIG_EP9302 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9302 #define CONFIG_SYS_PROMPT "EDB9302> " #define CONFIG_ENV_SECT_SIZE 0x00020000 #elif defined(CONFIG_EDB9302A) #define CONFIG_EP9302 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A #define CONFIG_SYS_PROMPT "EDB9302A> " #define CONFIG_ENV_SECT_SIZE 0x00020000 #elif defined(CONFIG_EDB9307) #define CONFIG_EP9307 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9307 #define CONFIG_SYS_PROMPT "EDB9307> " #define CONFIG_ENV_SECT_SIZE 0x00040000 #elif defined(CONFIG_EDB9307A) #define CONFIG_EP9307 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A #define CONFIG_SYS_PROMPT "EDB9307A> " #define CONFIG_ENV_SECT_SIZE 0x00020000 #elif defined(CONFIG_EDB9312) #define CONFIG_EP9312 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9312 #define CONFIG_SYS_PROMPT "EDB9312> " #define CONFIG_ENV_SECT_SIZE 0x00040000 #elif defined(CONFIG_EDB9315) #define CONFIG_EP9315 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9315 #define CONFIG_SYS_PROMPT "EDB9315> " #define CONFIG_ENV_SECT_SIZE 0x00040000 #elif defined(CONFIG_EDB9315A) #define CONFIG_EP9315 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A #define CONFIG_SYS_PROMPT "EDB9315A> " #define CONFIG_ENV_SECT_SIZE 0x00020000 #else #error "no board defined" #endif /* High-level configuration options */ #define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */ #define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ #undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */ /* Monitor configuration */ #include #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR #undef CONFIG_CMD_XIMG #undef CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_JFFS2 #define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ /* Print buffer size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Boot argument buffer size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ /* Serial port hardware configuration */ #define CONFIG_PL010_SERIAL #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, \ 115200, 230400} #define CONFIG_SYS_SERIAL0 0x808C0000 #define CONFIG_SYS_SERIAL1 0x808D0000 /*#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ (void *)CONFIG_SYS_SERIAL1} */ #define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0} /* Status LED */ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED 1 #define STATUS_LED_GREEN 0 #define STATUS_LED_RED 1 /* Green */ #define STATUS_LED_BIT STATUS_LED_GREEN #define STATUS_LED_STATE STATUS_LED_ON #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* Red */ #define STATUS_LED_BIT1 STATUS_LED_RED #define STATUS_LED_STATE1 STATUS_LED_OFF #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) /* Optional value */ #define STATUS_LED_BOOT STATUS_LED_BIT /* Network hardware configuration */ #define CONFIG_DRIVER_EP93XX_MAC #define CONFIG_MII_SUPPRESS_PREAMBLE #define CONFIG_MII #define CONFIG_PHY_ADDR 1 #define CONFIG_NET_MULTI #undef CONFIG_NETCONSOLE /* SDRAM configuration */ #if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \ defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \ defined(CONFIG_EDB9315) /* * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set * the SROMLL bit on the processor, resulting in this non-contiguous memory map. * * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of * 64 MB of SDRAM. */ #define CONFIG_EDB93XX_SDCS3 #elif defined(CONFIG_EDB9302A) || \ defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A) /* * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set * the SROMLL bit on the processor, resulting in this non-contiguous memory map. * * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM. */ #define CONFIG_EDB93XX_SDCS0 #else #error "no SDCS configuration for this board" #endif #if defined(CONFIG_EDB93XX_SDCS3) #define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Default load address */ #define PHYS_SDRAM_1 0x00000000 #elif defined(CONFIG_EDB93XX_SDCS0) #define CONFIG_SYS_LOAD_ADDR 0xc1000000 /* Default load address */ #define PHYS_SDRAM_1 0xc0000000 #endif #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_NR_DRAM_BANKS 8 #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE) /* Must match kernel config */ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) /* Run-time memory allocatons */ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_STACKSIZE (128 * 1024) #if defined(CONFIG_USE_IRQ) #define CONFIG_STACKSIZE_IRQ (4 * 1024) #define CONFIG_STACKSIZE_FIQ (4 * 1024) #endif #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* ----------------------------------------------------------------------------- * FLASH and environment organization * * The EDB9301, EDB9302(a), EDB9307a, EDB9315a have 1 bank of flash memory at * 0x60000000 consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit * data bus, for a total of 16 MB of CFI-compatible flash. * * The EDB9307, EDB9312, and EDB9315 have 1 bank of flash memory at * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit * data bus, for a total of 32 MB of CFI-compatible flash. * * * EDB9301/02(a)7a/15a EDB9307/12/15 * 0x60000000 - 0x0003FFFF u-boot u-boot * 0x60040000 - 0x0005FFFF environment #1 environment #1 * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued) * 0x60080000 - 0x0009FFFF unused environment #2 * 0x600A0000 - 0x000BFFFF unused environment #2 (continued) * 0x600C0000 - 0x00FFFFFF unused unused * 0x61000000 - 0x01FFFFFF not present unused */ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT (256+8) #define CONFIG_SYS_TEXT_BASE 0x60000000 #define PHYS_FLASH_1 CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */ #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR 0x60040000 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /* Define to enable MMC on SPI support */ /* #define CONFIG_EP93XX_SPI_MMC */ #ifdef CONFIG_EP93XX_SPI_MMC #define CONFIG_EP93XX_SPI #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_MMC_SPI #define CONFIG_CMD_MMC #define CONFIG_MMC_SPI_NPOWER_EGPIO 9 #endif #define CONFIG_USB_STORAGE #define CONFIG_USB_OHCI_NEW #define CONFIG_USB_OHCI_EP93XX #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ep93xx-ohci" #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x80020000 #define CONFIG_CMD_EXT2 #define CONFIG_CMD_EXT4 #define CONFIG_CMD_FAT #define CONFIG_CMD_USB #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_CMD_BOOTZ /* Define to disable flash configuration*/ /* #define CONFIG_EP93XX_NO_FLASH_CFG */ /* Define this for indusrial rated chips */ /* #define CONFIG_EDB93XX_INDUSTRIAL */ #endif /* !defined (__CONFIG_H) */