/* * Copyright (C) 2010 Eric C. Cooper * * Based on sheevaplug.h originally written by * Prafulla Wadaskar * (C) Copyright 2009 * Marvell Semiconductor * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _CONFIG_DOCKSTAR_H #define _CONFIG_DOCKSTAR_H #define CONFIG_SYS_GENERIC_BOARD /* * Version number information */ #define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar" /* * High Level Configuration Options (easy to change) */ #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ #define CONFIG_KW88F6281 1 /* SOC Name */ #define CONFIG_MACH_DOCKSTAR /* Machine type */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ /* * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ #include "mv-common.h" #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ #define CONFIG_SYS_PROMPT "DockStar> " /* Command Prompt */ /* * Environment variables configurations */ #ifdef CONFIG_CMD_NAND #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ #else #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ #endif /* * max 4k env size is enough, but in case of nand * it has to be rounded to sector size */ #define CONFIG_ENV_SIZE 0x20000 /* 128k */ #define CONFIG_ENV_ADDR 0x60000 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ /* * Default environment variables */ #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ "ubi part root; " \ "ubifsmount ubi:root; " \ "ubifsload 0x800000 ${kernel}; " \ "ubifsload 0x1100000 ${initrd}; " \ "bootm 0x800000 0x1100000" #define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ "mtdids=nand0=orion_nand\0" \ "mtdparts="CONFIG_MTDPARTS \ "kernel=/boot/uImage\0" \ "initrd=/boot/uInitrd\0" \ "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0" /* * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 #endif /* CONFIG_CMD_NET */ /* * File system */ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS #define CONFIG_LZO #endif /* _CONFIG_DOCKSTAR_H */