/* * U-Boot - Configuration file for BF536 brettl2 board */ #ifndef __CONFIG_BCT_BRETTL2_H__ #define __CONFIG_BCT_BRETTL2_H__ #include /* * Processor Settings */ #define CONFIG_BFIN_CPU bf536-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* * Clock Settings * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV */ /* CONFIG_CLKIN_HZ is any value in Hz */ #define CONFIG_CLKIN_HZ 16384000 /* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ /* 1 = CLKIN / 2 */ #define CONFIG_CLKIN_HALF 0 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ /* 1 = bypass PLL */ #define CONFIG_PLL_BYPASS 0 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ /* Values can range from 0-63 (where 0 means 64) */ #define CONFIG_VCO_MULT 24 /* CCLK_DIV controls the core clock divider */ /* Values can be 1, 2, 4, or 8 ONLY */ #define CONFIG_CCLK_DIV 1 /* SCLK_DIV controls the system clock divider */ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 3 #define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000) /* * Memory Settings */ #define CONFIG_MEM_ADD_WDTH 9 #define CONFIG_MEM_SIZE 32 /* * SDRAM Settings */ #define CONFIG_EBIU_SDRRC_VAL 0x07f6 #define CONFIG_EBIU_SDGCTL_VAL 0x9111cd #define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL) #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* * Network Settings */ #ifndef __ADSPBF534__ #define ADI_CMDS_NETWORK 1 #define CONFIG_BFIN_MAC 1 #define CONFIG_NETCONSOLE 1 #define CONFIG_HOSTNAME brettl2 #define CONFIG_IPADDR 192.168.233.224 #define CONFIG_GATEWAYIP 192.168.233.1 #define CONFIG_SERVERIP 192.168.233.53 #define CONFIG_ROOTPATH "/romfs/brettl2" #endif /* * Flash Settings */ #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_BASE 0x20000000 #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 135 /* * Env Storage Settings */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_OFFSET 0x4000 #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x12000 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) #define ENV_IS_EMBEDDED #else #define CONFIG_ENV_IS_EMBEDDED_IN_LDR #endif #ifdef ENV_IS_EMBEDDED /* WARNING - the following is hand-optimized to fit within * the sector before the environment sector. If it throws * an error during compilation remove an object here to get * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ arch/blackfin/lib/built-in.o (.text*); \ arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); #endif /* * I2C Settings */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_ADI /* * Misc Settings */ #define CONFIG_BOOTDELAY 1 #define CONFIG_LOADADDR 0x800000 #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 #define CONFIG_BAUDRATE 115200 #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS /* * Pull in common ADI header for remaining command/environment setup */ #include /* disable unnecessary features */ #undef CONFIG_BOOTM_RTEMS #undef CONFIG_BZIP2 #undef CONFIG_KALLSYMS #endif