/* * (C) Copyright 2002 ELTEC Elektronik AG * Frank Gottschling * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * board/config.h - configuration options, board specific */ #ifndef __CONFIG_H #define __CONFIG_H #define GTREGREAD(x) 0xffffffff /* needed for debug */ /* * High Level Configuration Options * (easy to change) */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* these hardware addresses are pretty bogus, please change them to suit your needs */ /* first ethernet */ #define CONFIG_ETHADDR 00:00:5b:ee:de:ad #define CONFIG_IPADDR 192.168.0.105 #define CONFIG_SERVERIP 192.168.0.100 #define CONFIG_ELPPC 1 /* this is an BAB740/BAB750 board */ #define CONFIG_BAUDRATE 9600 /* console baudrate */ #undef CONFIG_WATCHDOG #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_ZERO_BOOTDELAY_CHECK #undef CONFIG_BOOTARGS #define CONFIG_BOOTCOMMAND \ "bootp 1000000; " \ "setenv bootargs root=ramfs console=ttyS00,9600 " \ "ip=${ipaddr}:${serverip}:${rootpath}:${gatewayip}:" \ "${netmask}:${hostname}:eth0:none; " \ "bootm" #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ /* * BOOTP options */ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE /* * Command line configuration. */ #include #define CONFIG_CMD_PCI #define CONFIG_CMD_JFFS2 /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ /* * choose between COM1 and COM2 as serial console */ #define CONFIG_CONS_INDEX 1 #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ #define CONFIG_SYS_HZ 1000 /* dec. freq: 1 ms ticks */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ #define CONFIG_SYS_BOARD_ASM_INIT #define CONFIG_MISC_INIT_R /* * Address mapping scheme for the MPC107 mem controller is mapping B (CHRP) */ #undef CONFIG_SYS_ADDRESS_MAP_A #define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 #define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 #define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000 #define CONFIG_SYS_PCI_MEM_BUS 0x80000000 #define CONFIG_SYS_PCI_MEM_PHYS 0x80000000 #define CONFIG_SYS_PCI_MEM_SIZE 0x7d000000 #define CONFIG_SYS_ISA_MEM_BUS 0x00000000 #define CONFIG_SYS_ISA_MEM_PHYS 0xfd000000 #define CONFIG_SYS_ISA_MEM_SIZE 0x01000000 #define CONFIG_SYS_PCI_IO_BUS 0x00800000 #define CONFIG_SYS_PCI_IO_PHYS 0xfe800000 #define CONFIG_SYS_PCI_IO_SIZE 0x00400000 #define CONFIG_SYS_ISA_IO_BUS 0x00000000 #define CONFIG_SYS_ISA_IO_PHYS 0xfe000000 #define CONFIG_SYS_ISA_IO_SIZE 0x00800000 /* driver defines FDC,IDE,... */ #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS #define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS #define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS /* * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_USR_LED_BASE 0x78000000 #define CONFIG_SYS_NVRAM_BASE 0xff000000 #define CONFIG_SYS_UART_BASE 0xff400000 #define CONFIG_SYS_FLASH_BASE 0xfff00000 #define MPC107_EUMB_ADDR 0xfce00000 #define MPC107_EUMB_PI 0xfce41090 #define MPC107_EUMB_GCR 0xfce41020 #define MPC107_EUMB_IACKR 0xfce600a0 #define MPC107_I2C_ADDR 0xfce03000 /* * Definitions for initial stack pointer and data area */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Flash mapping/organization on the MPC10x. */ #define FLASH_BASE0_PRELIM 0xff800000 #define FLASH_BASE1_PRELIM 0xffc00000 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ /* * JFFS2 partitions * */ /* No command line, one static partition, whole device */ #undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* #define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=elppc-0,nor1=elppc-1" #define MTDPARTS_DEFAULT "mtdparts=elppc-0:-(jffs2),elppc-1:-(user)" */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */ #undef CONFIG_SYS_MEMTEST /* * Environment settings */ #define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ #define CONFIG_SYS_NVRAM_SIZE 0x800 /* NVRAM size (2kB) */ #define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */ #define CONFIG_ENV_ADDR 0x0 #define CONFIG_ENV_MAP_ADRS 0xff000000 #define CONFIG_SYS_NV_SROM_COPY_ADDR (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) #define CONFIG_SYS_NVRAM_ACCESS_ROUTINE /* only byte accsess alowed */ #define CONFIG_SYS_SROM_SIZE 0x100 /* shadow of revision info is in nvram */ /* * Serial devices */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK 24000000 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_UART_BASE + 0) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_UART_BASE + 8) /* * PCI stuff */ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP /* pci plug-and-play */ #define CONFIG_PCI_HOST PCI_HOST_AUTO #undef CONFIG_PCI_SCAN_SHOW /* * Optional Video console (graphic: SMI LynxEM) */ #define CONFIG_VIDEO #define CONFIG_CFB_CONSOLE #define VIDEO_KBD_INIT_FCT (simple_strtol (getenv("console"), NULL, 10)) #define VIDEO_TSTC_FCT serial_tstc #define VIDEO_GETC_FCT serial_getc #define CONFIG_VIDEO_SMI_LYNXEM #define CONFIG_VIDEO_LOGO #define CONFIG_CONSOLE_EXTRA_INFO /* * Initial BATs */ #if 1 #define CONFIG_SYS_IBAT0L 0 #define CONFIG_SYS_IBAT0U 0 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U #define CONFIG_SYS_IBAT1L 0 #define CONFIG_SYS_IBAT1U 0 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U #define CONFIG_SYS_IBAT2L 0 #define CONFIG_SYS_IBAT2U 0 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U #define CONFIG_SYS_IBAT3L 0 #define CONFIG_SYS_IBAT3U 0 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U #else /* SDRAM */ #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW) #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U /* address range for flashes */ #define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U /* ISA IO space */ #define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U /* ISA memory space */ #define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U #endif /* * Speed settings are board specific */ #define CONFIG_SYS_BUS_CLK 100000000 #define CONFIG_SYS_CPU_CLK 400000000 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* * Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * L2CR setup -- make sure this is right for your board! * look in include/74xx_7xx.h for the defines used here */ #define CONFIG_SYS_L2 #if 1 #define L2_INIT 0 /* cpu 750 CXe*/ #else #define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) #endif #define L2_ENABLE (L2_INIT | L2CR_L2E) #define CONFIG_EEPRO100 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_EEPRO100_SROM_WRITE #endif /* __CONFIG_H */