/* * (C) Copyright 2004 * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options * (easy to change) */ #define CONFIG_MPC8220 1 #define CONFIG_ALASKA8220 1 /* ... on Alaska board */ #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to determine the CPU speed. */ #define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ #define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ /* * Serial console configuration */ /* Define this for PSC console #define CONFIG_PSC_CONSOLE 1 */ #define CONFIG_EXTUART_CONSOLE 1 #ifdef CONFIG_EXTUART_CONSOLE # define CONFIG_CONS_INDEX 1 # define CONFIG_SYS_NS16550_SERIAL # define CONFIG_SYS_NS16550 # define CONFIG_SYS_NS16550_REG_SIZE 1 # define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008) # define CONFIG_SYS_NS16550_CLK 18432000 #endif #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_TIMESTAMP /* Print image info with timestamp */ /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #include #define CONFIG_CMD_BOOTD #define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF #define CONFIG_CMD_I2C #define CONFIG_CMD_NET #define CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SNTP #define CONFIG_NET_MULTI #define CONFIG_MII /* * Autobooting */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTARGS "root=/dev/ram rw" #define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 #define CONFIG_IPADDR 192.162.1.2 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_SERVERIP 192.162.1.1 #define CONFIG_GATEWAYIP 192.162.1.1 #define CONFIG_HOSTNAME Alaska #define CONFIG_OVERWRITE_ETHADDR_ONCE /* * I2C configuration */ #define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_MODULE 1 #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ #define CONFIG_SYS_I2C_SLAVE 0x7F /* * EEPROM configuration */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 /* #define CONFIG_ENV_IS_IN_EEPROM 1 #define CONFIG_ENV_OFFSET 0 #define CONFIG_ENV_SIZE 256 */ /* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD. else undefined it will boot from Intel Strata flash */ #define CONFIG_SYS_AMD_BOOT 1 /* * Flexbus Chipselect configuration */ #if defined (CONFIG_SYS_AMD_BOOT) #define CONFIG_SYS_CS0_BASE 0xfff0 #define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */ #define CONFIG_SYS_CS0_CTRL 0x003f0d40 #define CONFIG_SYS_CS1_BASE 0xfe00 #define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */ #define CONFIG_SYS_CS1_CTRL 0x003f1540 #else #define CONFIG_SYS_CS0_BASE 0xff00 #define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */ #define CONFIG_SYS_CS0_CTRL 0x003f1540 #define CONFIG_SYS_CS1_BASE 0xfe08 #define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */ #define CONFIG_SYS_CS1_CTRL 0x003f0d40 #endif #define CONFIG_SYS_CS2_BASE 0xf100 #define CONFIG_SYS_CS2_MASK 0x00040000 #define CONFIG_SYS_CS2_CTRL 0x003f1140 #define CONFIG_SYS_CS3_BASE 0xf200 #define CONFIG_SYS_CS3_MASK 0x00040000 #define CONFIG_SYS_CS3_CTRL 0x003f1100 #define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) #define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16) #if defined (CONFIG_SYS_AMD_BOOT) #define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE #define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE #else #define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000 #define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE #endif #define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16) #define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16) #define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ #define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ #define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ #define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ #define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ #define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ #define CONFIG_SYS_FLASH_CHECKSUM /* * Environment settings */ #define CONFIG_ENV_IS_IN_FLASH 1 #if defined (CONFIG_SYS_AMD_BOOT) #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE) #define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE #define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE #define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE) #define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE #define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE #else #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE) #define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE #define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE #define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE) #define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE #define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE #endif #define CONFIG_ENV_OVERWRITE 1 #if defined CONFIG_ENV_IS_IN_FLASH #undef CONFIG_ENV_IS_IN_NVRAM #undef CONFIG_ENV_IS_IN_EEPROM #elif defined CONFIG_ENV_IS_IN_NVRAM #undef CONFIG_ENV_IS_IN_FLASH #undef CONFIG_ENV_IS_IN_EEPROM #elif defined CONFIG_ENV_IS_IN_EEPROM #undef CONFIG_ENV_IS_IN_NVRAM #undef CONFIG_ENV_IS_IN_FLASH #endif /* * Memory map */ #define CONFIG_SYS_MBAR 0xF0000000 #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 #define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) #define CONFIG_SYS_SRAM_SIZE 0x8000 /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) #define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE TEXT_BASE #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) # define CONFIG_SYS_RAMBOOT 1 #endif #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* SDRAM configuration */ #define CONFIG_SYS_SDRAM_TOTAL_BANKS 2 #define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ #define CONFIG_SYS_SDRAM_SPD_SIZE 0x40 #define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ /* SDRAM drive strength register */ #define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) /* * Ethernet configuration */ #define CONFIG_MPC8220_FEC 1 #define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ #define CONFIG_PHY_ADDR 0x18 /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * Various low-level settings */ #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE /* * JFFS2 partitions */ /* No command line, one static partition */ /* #undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0x00400000 #define CONFIG_JFFS2_PART_OFFSET 0x00000000 */ /* mtdparts command line support */ /* #define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=alaska-0" #define MTDPARTS_DEFAULT "mtdparts=alaska-0:4m(user)" */ #endif /* __CONFIG_H */