/* * Copyright 2007-2012 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include DECLARE_GLOBAL_DATA_PTR; /* * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's * * Initialize controller and call the common driver/pci pci_hose_scan to * scan for bridges and devices. * * Hose fields which need to be pre-initialized by board specific code: * regions[] * first_busno * * Fields updated: * last_busno */ #include #include #include #ifndef CONFIG_SYS_PCI_MEMORY_BUS #define CONFIG_SYS_PCI_MEMORY_BUS 0 #endif #ifndef CONFIG_SYS_PCI_MEMORY_PHYS #define CONFIG_SYS_PCI_MEMORY_PHYS 0 #endif #if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS) #define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024) #endif /* Setup one inbound ATMU window. * * We let the caller decide what the window size should be */ static void set_inbound_window(volatile pit_t *pi, struct pci_region *r, u64 size) { u32 sz = (__ilog2_u64(size) - 1); #ifdef CONFIG_SYS_FSL_ERRATUM_A005434 u32 flag = 0; #else u32 flag = PIWAR_LOCAL; #endif flag |= PIWAR_EN | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; out_be32(&pi->pitar, r->phys_start >> 12); out_be32(&pi->piwbar, r->bus_start >> 12); #ifdef CONFIG_SYS_PCI_64BIT out_be32(&pi->piwbear, r->bus_start >> 44); #else out_be32(&pi->piwbear, 0); #endif if (r->flags & PCI_REGION_PREFETCH) flag |= PIWAR_PF; out_be32(&pi->piwar, flag | sz); } int fsl_setup_hose(struct pci_controller *hose, unsigned long addr) { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) addr; /* Reset hose to make sure its in a clean state */ memset(hose, 0, sizeof(struct pci_controller)); pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); return fsl_is_pci_agent(hose); } static int fsl_pci_setup_inbound_windows(struct pci_controller *hose, u64 out_lo, u8 pcie_cap, volatile pit_t *pi) { struct pci_region *r = hose->regions + hose->region_count; u64 sz = min((u64)gd->ram_size, (1ull << 32)); phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS; pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS; pci_size_t pci_sz; /* we have no space available for inbound memory mapping */ if (bus_start > out_lo) { printf ("no space for inbound mapping of memory\n"); return 0; } /* limit size */ if ((bus_start + sz) > out_lo) { sz = out_lo - bus_start; debug ("limiting size to %llx\n", sz); } pci_sz = 1ull << __ilog2_u64(sz); /* * we can overlap inbound/outbound windows on PCI-E since RX & TX * links a separate */ if ((pcie_cap == PCI_CAP_ID_EXP) && (pci_sz < sz)) { debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n", (u64)bus_start, (u64)phys_start, (u64)sz); pci_set_region(r, bus_start, phys_start, sz, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | PCI_REGION_PREFETCH); /* if we aren't an exact power of two match, pci_sz is smaller * round it up to the next power of two. We report the actual * size to pci region tracking. */ if (pci_sz != sz) sz = 2ull << __ilog2_u64(sz); set_inbound_window(pi--, r++, sz); sz = 0; /* make sure we dont set the R2 window */ } else { debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n", (u64)bus_start, (u64)phys_start, (u64)pci_sz); pci_set_region(r, bus_start, phys_start, pci_sz, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | PCI_REGION_PREFETCH); set_inbound_window(pi--, r++, pci_sz); sz -= pci_sz; bus_start += pci_sz; phys_start += pci_sz; pci_sz = 1ull << __ilog2_u64(sz); if (sz) { debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n", (u64)bus_start, (u64)phys_start, (u64)pci_sz); pci_set_region(r, bus_start, phys_start, pci_sz, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | PCI_REGION_PREFETCH); set_inbound_window(pi--, r++, pci_sz); sz -= pci_sz; bus_start += pci_sz; phys_start += pci_sz; } } #if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT) /* * On 64-bit capable systems, set up a mapping for all of DRAM * in high pci address space. */ pci_sz = 1ull << __ilog2_u64(gd->ram_size); /* round up to the next largest power of two */ if (gd->ram_size > pci_sz) pci_sz = 1ull << (__ilog2_u64(gd->ram_size) + 1); debug ("R64 bus_start: %llx phys_start: %llx size: %llx\n", (u64)CONFIG_SYS_PCI64_MEMORY_BUS, (u64)CONFIG_SYS_PCI_MEMORY_PHYS, (u64)pci_sz); pci_set_region(r, CONFIG_SYS_PCI64_MEMORY_BUS, CONFIG_SYS_PCI_MEMORY_PHYS, pci_sz, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | PCI_REGION_PREFETCH); set_inbound_window(pi--, r++, pci_sz); #else pci_sz = 1ull << __ilog2_u64(sz); if (sz) { debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n", (u64)bus_start, (u64)phys_start, (u64)pci_sz); pci_set_region(r, bus_start, phys_start, pci_sz, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY | PCI_REGION_PREFETCH); sz -= pci_sz; bus_start += pci_sz; phys_start += pci_sz; set_inbound_window(pi--, r++, pci_sz); } #endif #ifdef CONFIG_PHYS_64BIT if (sz && (((u64)gd->ram_size) < (1ull << 32))) printf("Was not able to map all of memory via " "inbound windows -- %lld remaining\n", sz); #endif hose->region_count = r - hose->regions; return 1; } #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER static void fsl_pcie_boot_master(pit_t *pi) { /* configure inbound window for slave's u-boot image */ debug("PCIEBOOT - MASTER: Inbound window for slave's image; " "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n", (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1, CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); struct pci_region r_inbound; u32 sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE) - 1; pci_set_region(&r_inbound, CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1, CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, sz_inbound, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); set_inbound_window(pi--, &r_inbound, CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); /* configure inbound window for slave's u-boot image */ debug("PCIEBOOT - MASTER: Inbound window for slave's image; " "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n", (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2, CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); pci_set_region(&r_inbound, CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2, CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS, sz_inbound, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); set_inbound_window(pi--, &r_inbound, CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE); /* configure inbound window for slave's ucode and ENV */ debug("PCIEBOOT - MASTER: Inbound window for slave's " "ucode and ENV; " "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n", (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS, (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS, CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE); sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE) - 1; pci_set_region(&r_inbound, CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS, CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS, sz_inbound, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); set_inbound_window(pi--, &r_inbound, CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE); } static void fsl_pcie_boot_master_release_slave(int port) { unsigned long release_addr; /* now release slave's core 0 */ switch (port) { case 1: release_addr = CONFIG_SYS_PCIE1_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; #ifdef CONFIG_SYS_PCIE2_MEM_VIRT case 2: release_addr = CONFIG_SYS_PCIE2_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; #endif #ifdef CONFIG_SYS_PCIE3_MEM_VIRT case 3: release_addr = CONFIG_SYS_PCIE3_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; #endif default: release_addr = 0; break; } if (release_addr != 0) { out_be32((void *)release_addr, CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK); debug("PCIEBOOT - MASTER: " "Release slave successfully! Now the slave should start up!\n"); } else { debug("PCIEBOOT - MASTER: " "Release slave failed!\n"); } } #endif void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) { u32 cfg_addr = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_addr; u32 cfg_data = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_data; u16 temp16; u32 temp32; u32 block_rev; int enabled, r, inbound = 0; u16 ltssm; u8 temp8, pcie_cap; int pcie_cap_pos; int pci_dcr; int pci_dsr; int pci_lsr; #if defined(CONFIG_FSL_PCIE_DISABLE_ASPM) int pci_lcr; #endif volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)cfg_addr; struct pci_region *reg = hose->regions + hose->region_count; pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0); /* Initialize ATMU registers based on hose regions and flags */ volatile pot_t *po = &pci->pot[1]; /* skip 0 */ volatile pit_t *pi; u64 out_hi = 0, out_lo = -1ULL; u32 pcicsrbar, pcicsrbar_sz; pci_setup_indirect(hose, cfg_addr, cfg_data); block_rev = in_be32(&pci->block_rev1); if (PEX_IP_BLK_REV_2_2 <= block_rev) { pi = &pci->pit[2]; /* 0xDC0 */ } else { pi = &pci->pit[3]; /* 0xDE0 */ } /* Handle setup of outbound windows first */ for (r = 0; r < hose->region_count; r++) { unsigned long flags = hose->regions[r].flags; u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1); flags &= PCI_REGION_SYS_MEMORY|PCI_REGION_TYPE; if (flags != PCI_REGION_SYS_MEMORY) { u64 start = hose->regions[r].bus_start; u64 end = start + hose->regions[r].size; out_be32(&po->powbar, hose->regions[r].phys_start >> 12); out_be32(&po->potar, start >> 12); #ifdef CONFIG_SYS_PCI_64BIT out_be32(&po->potear, start >> 44); #else out_be32(&po->potear, 0); #endif if (hose->regions[r].flags & PCI_REGION_IO) { out_be32(&po->powar, POWAR_EN | sz | POWAR_IO_READ | POWAR_IO_WRITE); } else { out_be32(&po->powar, POWAR_EN | sz | POWAR_MEM_READ | POWAR_MEM_WRITE); out_lo = min(start, out_lo); out_hi = max(end, out_hi); } po++; } } debug("Outbound memory range: %llx:%llx\n", out_lo, out_hi); /* setup PCSRBAR/PEXCSRBAR */ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff); pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pcicsrbar_sz); pcicsrbar_sz = ~pcicsrbar_sz + 1; if (out_hi < (0x100000000ull - pcicsrbar_sz) || (out_lo > 0x100000000ull)) pcicsrbar = 0x100000000ull - pcicsrbar_sz; else pcicsrbar = (out_lo - pcicsrbar_sz) & -pcicsrbar_sz; pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, pcicsrbar); out_lo = min(out_lo, (u64)pcicsrbar); debug("PCICSRBAR @ 0x%x\n", pcicsrbar); pci_set_region(reg++, pcicsrbar, CONFIG_SYS_CCSRBAR_PHYS, pcicsrbar_sz, PCI_REGION_SYS_MEMORY); hose->region_count++; /* see if we are a PCIe or PCI controller */ pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP); pci_dcr = pcie_cap_pos + 0x08; pci_dsr = pcie_cap_pos + 0x0a; pci_lsr = pcie_cap_pos + 0x12; pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap); #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER /* boot from PCIE --master */ char *s = getenv("bootmaster"); char pcie[6]; sprintf(pcie, "PCIE%d", pci_info->pci_num); if (s && (strcmp(s, pcie) == 0)) { debug("PCIEBOOT - MASTER: Master port [ %d ] for pcie boot.\n", pci_info->pci_num); fsl_pcie_boot_master((pit_t *)pi); } else { /* inbound */ inbound = fsl_pci_setup_inbound_windows(hose, out_lo, pcie_cap, pi); } #else /* inbound */ inbound = fsl_pci_setup_inbound_windows(hose, out_lo, pcie_cap, pi); #endif for (r = 0; r < hose->region_count; r++) debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n", r, (u64)hose->regions[r].phys_start, (u64)hose->regions[r].bus_start, (u64)hose->regions[r].size, hose->regions[r].flags); pci_register_hose(hose); pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */ hose->current_busno = hose->first_busno; out_be32(&pci->pedr, 0xffffffff); /* Clear any errors */ out_be32(&pci->peer, ~0x20140); /* Enable All Error Interrupts except * - Master abort (pci) * - Master PERR (pci) * - ICCA (PCIe) */ pci_hose_read_config_dword(hose, dev, pci_dcr, &temp32); temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */ pci_hose_write_config_dword(hose, dev, pci_dcr, temp32); #if defined(CONFIG_FSL_PCIE_DISABLE_ASPM) pci_lcr = pcie_cap_pos + 0x10; temp32 = 0; pci_hose_read_config_dword(hose, dev, pci_lcr, &temp32); temp32 &= ~0x03; /* Disable ASPM */ pci_hose_write_config_dword(hose, dev, pci_lcr, temp32); udelay(1); #endif if (pcie_cap == PCI_CAP_ID_EXP) { if (block_rev >= PEX_IP_BLK_REV_3_0) { #define PEX_CSR0_LTSSM_MASK 0xFC #define PEX_CSR0_LTSSM_SHIFT 2 ltssm = (in_be32(&pci->pex_csr0) & PEX_CSR0_LTSSM_MASK) >> PEX_CSR0_LTSSM_SHIFT; enabled = (ltssm == 0x11) ? 1 : 0; } else { /* pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); */ /* enabled = ltssm >= PCI_LTSSM_L0; */ pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); enabled = ltssm >= PCI_LTSSM_L0; #ifdef CONFIG_FSL_PCIE_RESET if (ltssm == 1) { int i; debug("....PCIe link error. " "LTSSM=0x%02x.", ltssm); /* assert PCIe reset */ setbits_be32(&pci->pdb_stat, 0x08000000); (void) in_be32(&pci->pdb_stat); udelay(100); debug(" Asserting PCIe reset @%p = %x\n", &pci->pdb_stat, in_be32(&pci->pdb_stat)); /* clear PCIe reset */ clrbits_be32(&pci->pdb_stat, 0x08000000); asm("sync;isync"); for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) { pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); udelay(1000); debug("....PCIe link error. " "LTSSM=0x%02x.\n", ltssm); } enabled = ltssm >= PCI_LTSSM_L0; /* we need to re-write the bar0 since a reset will * clear it */ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, pcicsrbar); } #endif } #ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003 if (enabled == 0) { serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; temp32 = in_be32(&srds_regs->srdspccr0); if ((temp32 >> 28) == 3) { int i; out_be32(&srds_regs->srdspccr0, 2 << 28); setbits_be32(&pci->pdb_stat, 0x08000000); in_be32(&pci->pdb_stat); udelay(100); clrbits_be32(&pci->pdb_stat, 0x08000000); asm("sync;isync"); for (i=0; i < 100 && ltssm < PCI_LTSSM_L0; i++) { pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); udelay(1000); } enabled = ltssm >= PCI_LTSSM_L0; } } #endif if (!enabled) { /* Let the user know there's no PCIe link for root * complex. for endpoint, the link may not setup, so * print undetermined. */ if (fsl_is_pci_agent(hose)) printf("undetermined, regs @ 0x%lx\n", pci_info->regs); else printf("no link, regs @ 0x%lx\n", pci_info->regs); hose->last_busno = hose->first_busno; return; } out_be32(&pci->pme_msg_det, 0xffffffff); out_be32(&pci->pme_msg_int_en, 0xffffffff); /* Print the negotiated PCIe link width */ pci_hose_read_config_word(hose, dev, pci_lsr, &temp16); printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4, (temp16 & 0xf), pci_info->regs); hose->current_busno++; /* Start scan with secondary */ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); } /* Use generic setup_device to initialize standard pci regs, * but do not allocate any windows since any BAR found (such * as PCSRBAR) is not in this cpu's memory space. */ pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); if (inbound) { pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16); pci_hose_write_config_word(hose, dev, PCI_COMMAND, temp16 | PCI_COMMAND_MEMORY); } #ifndef CONFIG_PCI_NOSCAN if (!fsl_is_pci_agent(hose)) { debug(" Scanning PCI bus %02x\n", hose->current_busno); hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno); } else { debug(" Not scanning PCI bus %02x. PI=%x\n", hose->current_busno, temp8); hose->last_busno = hose->current_busno; } /* if we are PCIe - update limit regs and subordinate busno * for the virtual P2P bridge */ if (pcie_cap == PCI_CAP_ID_EXP) { pciauto_postscan_setup_bridge(hose, dev, hose->last_busno); } #else hose->last_busno = hose->current_busno; #endif /* Clear all error indications */ if (pcie_cap == PCI_CAP_ID_EXP) out_be32(&pci->pme_msg_det, 0xffffffff); out_be32(&pci->pedr, 0xffffffff); pci_hose_read_config_word(hose, dev, pci_dsr, &temp16); if (temp16) { pci_hose_write_config_word(hose, dev, pci_dsr, 0xffff); } pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16); if (temp16) { pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff); } } int fsl_is_pci_agent(struct pci_controller *hose) { int pcie_cap_pos; u8 pcie_cap; pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0); pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP); pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap); if (pcie_cap == PCI_CAP_ID_EXP) { u8 header_type; pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL; } else { u8 prog_if; pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); /* Programming Interface (PCI_CLASS_PROG) * 0 == pci host or pcie root-complex, * 1 == pci agent or pcie end-point */ return (prog_if == FSL_PROG_IF_AGENT); } } int fsl_pci_init_port(struct fsl_pci_info *pci_info, struct pci_controller *hose, int busno) { volatile ccsr_fsl_pci_t *pci; struct pci_region *r; pci_dev_t dev = PCI_BDF(busno,0,0); int pcie_cap_pos; u8 pcie_cap; pci = (ccsr_fsl_pci_t *) pci_info->regs; /* on non-PCIe controllers we don't have pme_msg_det so this code * should do nothing since the read will return 0 */ if (in_be32(&pci->pme_msg_det)) { out_be32(&pci->pme_msg_det, 0xffffffff); debug (" with errors. Clearing. Now 0x%08x", pci->pme_msg_det); } r = hose->regions + hose->region_count; /* outbound memory */ pci_set_region(r++, pci_info->mem_bus, pci_info->mem_phys, pci_info->mem_size, PCI_REGION_MEM); /* outbound io */ pci_set_region(r++, pci_info->io_bus, pci_info->io_phys, pci_info->io_size, PCI_REGION_IO); hose->region_count = r - hose->regions; hose->first_busno = busno; fsl_pci_init(hose, pci_info); if (fsl_is_pci_agent(hose)) { fsl_pci_config_unlock(hose); hose->last_busno = hose->first_busno; #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER } else { /* boot from PCIE --master releases slave's core 0 */ char *s = getenv("bootmaster"); char pcie[6]; sprintf(pcie, "PCIE%d", pci_info->pci_num); if (s && (strcmp(s, pcie) == 0)) fsl_pcie_boot_master_release_slave(pci_info->pci_num); #endif } pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP); pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap); printf("PCI%s%x: Bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ? "e" : "", pci_info->pci_num, hose->first_busno, hose->last_busno); return(hose->last_busno + 1); } /* Enable inbound PCI config cycles for agent/endpoint interface */ void fsl_pci_config_unlock(struct pci_controller *hose) { pci_dev_t dev = PCI_BDF(hose->first_busno,0,0); int pcie_cap_pos; u8 pcie_cap; u16 pbfr; if (!fsl_is_pci_agent(hose)) return; pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP); pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap); if (pcie_cap != 0x0) { /* PCIe - set CFG_READY bit of Configuration Ready Register */ pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1); } else { /* PCI - clear ACL bit of PBFR */ pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr); pbfr &= ~0x20; pci_hose_write_config_word(hose, dev, FSL_PCI_PBFR, pbfr); } } #if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || \ defined(CONFIG_PCIE3) || defined(CONFIG_PCIE4) int fsl_configure_pcie(struct fsl_pci_info *info, struct pci_controller *hose, const char *connected, int busno) { int is_endpoint; set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law); set_next_law(info->io_phys, law_size_bits(info->io_size), info->law); is_endpoint = fsl_setup_hose(hose, info->regs); printf("PCIe%u: %s", info->pci_num, is_endpoint ? "Endpoint" : "Root Complex"); if (connected) printf(" of %s", connected); puts(", "); return fsl_pci_init_port(info, hose, busno); } #if defined(CONFIG_FSL_CORENET) #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1 #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2 #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3 #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4 #else #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1 #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2 #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3 #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4 #endif #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC85xx) #define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE #define _DEVDISR_PCIE2 MPC85xx_DEVDISR_PCIE2 #define _DEVDISR_PCIE3 MPC85xx_DEVDISR_PCIE3 #define _DEVDISR_PCIE4 0 #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC86xx) #define _DEVDISR_PCIE1 MPC86xx_DEVDISR_PCIE1 #define _DEVDISR_PCIE2 MPC86xx_DEVDISR_PCIE2 #define _DEVDISR_PCIE3 0 #define _DEVDISR_PCIE4 0 #define CONFIG_SYS_MPC8xxx_GUTS_ADDR \ (&((immap_t *)CONFIG_SYS_IMMR)->im_gur) #else #error "No defines for DEVDISR_PCIE" #endif /* Implement a dummy function for those platforms w/o SERDES */ static const char *__board_serdes_name(enum srds_prtcl device) { switch (device) { #ifdef CONFIG_SYS_PCIE1_NAME case PCIE1: return CONFIG_SYS_PCIE1_NAME; #endif #ifdef CONFIG_SYS_PCIE2_NAME case PCIE2: return CONFIG_SYS_PCIE2_NAME; #endif #ifdef CONFIG_SYS_PCIE3_NAME case PCIE3: return CONFIG_SYS_PCIE3_NAME; #endif #ifdef CONFIG_SYS_PCIE4_NAME case PCIE4: return CONFIG_SYS_PCIE4_NAME; #endif default: return NULL; } return NULL; } __attribute__((weak, alias("__board_serdes_name"))) const char * board_serdes_name(enum srds_prtcl device); static u32 devdisr_mask[] = { _DEVDISR_PCIE1, _DEVDISR_PCIE2, _DEVDISR_PCIE3, _DEVDISR_PCIE4, }; int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev, struct fsl_pci_info *pci_info) { struct pci_controller *hose; int num = dev - PCIE1; hose = calloc(1, sizeof(struct pci_controller)); if (!hose) return busno; if (is_serdes_configured(dev) && !(devdisr & devdisr_mask[num])) { busno = fsl_configure_pcie(pci_info, hose, board_serdes_name(dev), busno); } else { printf("PCIe%d: disabled\n", num + 1); } return busno; } int fsl_pcie_init_board(int busno) { struct fsl_pci_info pci_info; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; u32 devdisr; u32 *addr; #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 addr = &gur->devdisr3; #else addr = &gur->devdisr; #endif devdisr = in_be32(addr); #ifdef CONFIG_PCIE1 SET_STD_PCIE_INFO(pci_info, 1); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info); #else setbits_be32(addr, _DEVDISR_PCIE1); /* disable */ #endif #ifdef CONFIG_PCIE2 SET_STD_PCIE_INFO(pci_info, 2); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info); #else setbits_be32(addr, _DEVDISR_PCIE2); /* disable */ #endif #ifdef CONFIG_PCIE3 SET_STD_PCIE_INFO(pci_info, 3); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info); #else setbits_be32(addr, _DEVDISR_PCIE3); /* disable */ #endif #ifdef CONFIG_PCIE4 SET_STD_PCIE_INFO(pci_info, 4); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info); #else setbits_be32(addr, _DEVDISR_PCIE4); /* disable */ #endif return busno; } #else int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev, struct fsl_pci_info *pci_info) { return busno; } int fsl_pcie_init_board(int busno) { return busno; } #endif #ifdef CONFIG_OF_BOARD_SETUP #include #include void ft_fsl_pci_setup(void *blob, const char *pci_compat, unsigned long ctrl_addr) { int off; u32 bus_range[2]; phys_addr_t p_ctrl_addr = (phys_addr_t)ctrl_addr; struct pci_controller *hose; hose = find_hose_by_cfg_addr((void *)(ctrl_addr)); /* convert ctrl_addr to true physical address */ p_ctrl_addr = (phys_addr_t)ctrl_addr - CONFIG_SYS_CCSRBAR; p_ctrl_addr += CONFIG_SYS_CCSRBAR_PHYS; off = fdt_node_offset_by_compat_reg(blob, pci_compat, p_ctrl_addr); if (off < 0) return; /* We assume a cfg_addr not being set means we didn't setup the controller */ if ((hose == NULL) || (hose->cfg_addr == NULL)) { fdt_del_node(blob, off); } else { bus_range[0] = 0; bus_range[1] = hose->last_busno - hose->first_busno; fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4); fdt_pci_dma_ranges(blob, off, hose); } } #endif