/* * SPI flash internal definitions * * Copyright (C) 2008 Atmel Corporation */ /* Common parameters -- kind of high, but they should only occur when there * is a problem (and well your system already is broken), so err on the side * of caution in case we're dealing with slower SPI buses and/or processors. */ #define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) #define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) #define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ) /* Common commands */ #define CMD_READ_ID 0x9f #define CMD_READ_ARRAY_SLOW 0x03 #define CMD_READ_ARRAY_FAST 0x0b #define CMD_WRITE_STATUS 0x01 #define CMD_PAGE_PROGRAM 0x02 #define CMD_WRITE_DISABLE 0x04 #define CMD_READ_STATUS 0x05 #define CMD_FLAG_STATUS 0x70 #define CMD_WRITE_ENABLE 0x06 #define CMD_ERASE_4K 0x20 #define CMD_ERASE_32K 0x52 #define CMD_ERASE_64K 0xd8 #define CMD_ERASE_CHIP 0xc7 #define SPI_FLASH_16MB_BOUN 0x1000000 /* Manufacture ID's */ #define SPI_FLASH_SPANSION_IDCODE0 0x01 #define SPI_FLASH_STMICRO_IDCODE0 0x20 #define SPI_FLASH_WINBOND_IDCODE0 0xef #ifdef CONFIG_SPI_FLASH_BAR /* Bank addr access commands */ # define CMD_BANKADDR_BRWR 0x17 # define CMD_BANKADDR_BRRD 0x16 # define CMD_EXTNADDR_WREAR 0xC5 # define CMD_EXTNADDR_RDEAR 0xC8 #endif /* Common status */ #define STATUS_WIP 0x01 #define STATUS_PEC 0x80 /* Send a single-byte command to the device and read the response */ int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len); /* * Send a multi-byte command to the device and read the response. Used * for flash array reads, etc. */ int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, void *data, size_t data_len); int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset, size_t len, void *data); /* * Send a multi-byte command to the device followed by (optional) * data. Used for programming the flash array, etc. */ int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, const void *data, size_t data_len); /* * Write the requested data out breaking it up into multiple write * commands as needed per the write size. */ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset, size_t len, const void *buf); /* * Enable writing on the SPI flash. */ static inline int spi_flash_cmd_write_enable(struct spi_flash *flash) { return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0); } /* * Disable writing on the SPI flash. */ static inline int spi_flash_cmd_write_disable(struct spi_flash *flash) { return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0); } /* Program the status register. */ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr); #ifdef CONFIG_SPI_FLASH_BAR /* Program the bank address register */ int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel); /* Configure the BAR - discover the bank cmds */ int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0); #endif /* * Same as spi_flash_cmd_read() except it also claims/releases the SPI * bus. Used as common part of the ->read() operation. */ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, size_t cmd_len, void *data, size_t data_len); /* * Used for spi_flash write operation * - SPI claim * - spi_flash_cmd_write_enable * - spi_flash_cmd_write * - spi_flash_cmd_wait_ready * - SPI release */ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, size_t cmd_len, const void *buf, size_t buf_len); /* * Send the read status command to the device and wait for the wip * (write-in-progress) bit to clear itself. */ int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout); /* Erase sectors. */ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len); /* Manufacturer-specific probe functions */ struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode);