This file contains information for VSC9953, a Vitesse L2 Switch IP which is integrated in the T1040/T1020 Freescale SoCs. About Device: ============= VSC9953 is an 8-port Gigabit Ethernet switch supports the following features: - 8192 MAC addresses - Static Address provisioning - Dynamic learning of MAC addresses and aging - 4096 VLANs - Independent and shared VLAN learning (IVL, SVL) - Policing with storm control and MC/BC protection - IPv4 and IPv6 multicast - Jumbo frames (9.6 KB) - Access Control List - VLAN editing, translation and remarking - RMON counters per port Switch interfaces: - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links) to FMan ports (FM1@DTSEC1 and FM1@DTSEC2) Commands Overview: ============= Commands supported - enable/disable a port - check a port's link speed, duplexity and status. Commands syntax ethsw port enable|disable - enable/disable an l2 switch port ethsw port show - show an l2 switch port's configuration port_nr=0..9; use "all" for all ports => ethsw port all show Port Status Link Speed Duplex 0 enabled down 10 half 1 enabled down 10 half 2 enabled down 10 half 3 enabled up 1000 full 4 disabled down - half 5 disabled down - half 6 disabled down - half 7 disabled down - half 8 enabled up 2500 full 9 enabled up 2500 full =>