/* * (C) Copyright 2008-2009 * BuS Elektronik GmbH & Co. KG * Jens Scharsig * * SPDX-License-Identifier: GPL-2.0+ */ U-Boot vcxk video controller driver ====================================== By defining CONFIG_VIDEO_VCXK this driver can be used with VC2K, VC4K and VC8K devices on following boards: board | ARCH | Vendor ----------------------------------------------------------------------- EB+CPU5282-T1 | MCF5282 | BuS Elektronik GmbH & Co. KG EB+MCF-EVB123 | MCF5282 | BuS Elektronik GmbH & Co. KG EB+CPUx9K2 | AT91RM9200 | BuS Elektronik GmbH & Co. KG ZLSA | AT91RM9200 | Ruf Telematik AG Driver configuration -------------------- The driver needs some defines to describe the target hardware: CONFIG_SYS_VCXK_BASE base address of VCxK hardware memory CONFIG_SYS_VCXK_DEFAULT_LINEALIGN defines the physical alignment of a pixel row CONFIG_SYS_VCXK_DOUBLEBUFFERED some boards that use vcxk prevent read from framebuffer memory. define this option to enable double buffering (needs 16KiB RAM) CONFIG_SYS_VCXK__PIN defines the number of the I/O line PIN in the port valid values for are: ACKNOWLEDGE describes the acknowledge line from vcxk hardware ENABLE describes the enable line to vcxk hardware INVERT describes the invert line to vcxk hardware RESET describes the reset line to vcxk hardware REQUEST describes the request line to vcxk hardware CONFIG_SYS_VCXK__PORT defines the I/O port which is connected with the line for valid values for see CONFIG_SYS_VCXK__PIN CONFIG_SYS_VCXK__DDR defines the register which configures the direction for valid values for see CONFIG_SYS_VCXK__PIN