Status LED ======================================== This README describes the status LED API. The API is defined by the include file include/status_led.h The first step is to define CONFIG_STATUS_LED in the board config file. If the LED support is only for a single board, define CONFIG_BOARD_SPECIFIC_LED in the board config file. At a minimum, these macros must be defined at STATUS_LED_BIT STATUS_LED_STATE STATUS_LED_PERIOD If there are multiple status LED's define STATUS_LED_BIT STATUS_LED_STATE STATUS_LED_PERIOD Where can a integer 1 through 3. STATUS_LED_BIT is passed into the __led_* functions to identify which LED is being acted on. As such, the value choose must be unique with with respect to the other STATUS_LED_BIT's. Mapping the value to a physical LED is the reponsiblity of the __led_* function. STATUS_LED_STATE is the initial state of the LED. It should be set to one of these values: STATUS_LED_OFF or STATUS_LED_ON. STATUS_LED_PERIOD is how long is the LED blink period. This usually set to (CONFIG_SYS_HZ / ) where is the frequency of the blink. Typical values range from 2 to 10. Some other LED macros STATUS_LED_BOOT is the LED to light when the board is booting. This must be a valid STATUS_LED_BIT value. STATUS_LED_RED is the red LED. It is used signal errors. This must be a valid STATUS_LED_BIT value. Other similar color LED's are STATUS_LED_YELLOW and STATUS_LED_BLUE. These board must define these functions __led_init is called once to initialize the LED to STATUS_LED_STATE. One time start up code should be placed here. __led_set is called to change the state of the LED. __led_toggle is called to toggle the current state of the LED. Colour LED ======================================== Colour LED's are at present only used by ARM. The functions names explain their purpose. coloured_LED_init red_LED_on red_LED_off green_LED_on green_LED_off yellow_LED_on yellow_LED_off blue_LED_on blue_LED_off These are weakly defined in arch/arm/lib/board.c to noops. Where applicable, define these functions in the board specific source. TBD : Describe older board dependent macros similar to what is done for CONFIG_TQM8xxL. TBD : Describe general support via asm/status_led.h