/* * serial.h - common serial defines for early debug and serial driver. * any functions defined here must be always_inline since * initcode cannot have function calls. * * Copyright (c) 2004-2007 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ #ifndef __BFIN_CPU_SERIAL_H__ #define __BFIN_CPU_SERIAL_H__ #include #include #ifndef CONFIG_UART_CONSOLE # define CONFIG_UART_CONSOLE 0 #endif #ifdef CONFIG_DEBUG_EARLY_SERIAL # define BFIN_DEBUG_EARLY_SERIAL 1 #else # define BFIN_DEBUG_EARLY_SERIAL 0 #endif #define LOB(x) ((x) & 0xFF) #define HIB(x) (((x) >> 8) & 0xFF) #ifndef UART_LSR # if (CONFIG_UART_CONSOLE == 3) # define pUART_DLH pUART3_DLH # define pUART_DLL pUART3_DLL # define pUART_GCTL pUART3_GCTL # define pUART_IER pUART3_IER # define pUART_IERC pUART3_IER_CLEAR # define pUART_LCR pUART3_LCR # define pUART_LSR pUART3_LSR # define pUART_RBR pUART3_RBR # define pUART_THR pUART3_THR # define UART_THR UART3_THR # define UART_LSR UART3_LSR # elif (CONFIG_UART_CONSOLE == 2) # define pUART_DLH pUART2_DLH # define pUART_DLL pUART2_DLL # define pUART_GCTL pUART2_GCTL # define pUART_IER pUART2_IER # define pUART_IERC pUART2_IER_CLEAR # define pUART_LCR pUART2_LCR # define pUART_LSR pUART2_LSR # define pUART_RBR pUART2_RBR # define pUART_THR pUART2_THR # define UART_THR UART2_THR # define UART_LSR UART2_LSR # elif (CONFIG_UART_CONSOLE == 1) # define pUART_DLH pUART1_DLH # define pUART_DLL pUART1_DLL # define pUART_GCTL pUART1_GCTL # define pUART_IER pUART1_IER # define pUART_IERC pUART1_IER_CLEAR # define pUART_LCR pUART1_LCR # define pUART_LSR pUART1_LSR # define pUART_RBR pUART1_RBR # define pUART_THR pUART1_THR # define UART_THR UART1_THR # define UART_LSR UART1_LSR # elif (CONFIG_UART_CONSOLE == 0) # define pUART_DLH pUART0_DLH # define pUART_DLL pUART0_DLL # define pUART_GCTL pUART0_GCTL # define pUART_IER pUART0_IER # define pUART_IERC pUART0_IER_CLEAR # define pUART_LCR pUART0_LCR # define pUART_LSR pUART0_LSR # define pUART_RBR pUART0_RBR # define pUART_THR pUART0_THR # define UART_THR UART0_THR # define UART_LSR UART0_LSR # endif #endif #ifndef __ASSEMBLY__ #ifdef __ADSPBF54x__ # define ACCESS_LATCH() # define ACCESS_PORT_IER() # define CLEAR_IER() (*pUART_IERC = 0) #else # define ACCESS_LATCH() (*pUART_LCR |= DLAB) # define ACCESS_PORT_IER() (*pUART_LCR &= ~DLAB) # define CLEAR_IER() (*pUART_IER = 0) #endif __attribute__((always_inline)) static inline void serial_do_portmux(void) { #if defined(__ADSPBF51x__) # define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \ bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); switch (CONFIG_UART_CONSOLE) { case 0: DO_MUX(G, 5, 5, 9, 10); break; /* Port G; mux 5; PG9 and PG10 */ case 1: DO_MUX(F, 2, 3, 14, 15); break; /* Port H; mux 2/3; PH14 and PH15 */ } SSYNC(); #elif defined(__ADSPBF52x__) # define DO_MUX(port, mux, tx, rx) \ bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \ bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); switch (CONFIG_UART_CONSOLE) { case 0: DO_MUX(G, 2, 7, 8); break; /* Port G; mux 2; PG2 and PG8 */ case 1: DO_MUX(F, 5, 14, 15); break; /* Port F; mux 5; PF14 and PF15 */ } SSYNC(); #elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) # define DO_MUX(func, tx, rx) \ bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~(func)); \ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | PF##tx | PF##rx); switch (CONFIG_UART_CONSOLE) { case 0: DO_MUX(PFDE, 0, 1); break; case 1: DO_MUX(PFTE, 2, 3); break; } SSYNC(); #elif defined(__ADSPBF54x__) # define DO_MUX(port, tx, rx) \ bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \ bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); switch (CONFIG_UART_CONSOLE) { case 0: DO_MUX(E, 7, 8); break; /* Port E; PE7 and PE8 */ case 1: DO_MUX(H, 0, 1); break; /* Port H; PH0 and PH1 */ case 2: DO_MUX(B, 4, 5); break; /* Port B; PB4 and PB5 */ case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */ } SSYNC(); #endif } __attribute__((always_inline)) static inline void serial_early_init(void) { /* handle portmux crap on different Blackfins */ serial_do_portmux(); /* always enable UART -- avoids anomalies 05000309 and 05000350 */ *pUART_GCTL = UCEN; /* Set LCR to Word Lengh 8-bit word select */ *pUART_LCR = WLS_8; SSYNC(); } __attribute__((always_inline)) static inline void serial_early_put_div(uint16_t divisor) { /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH(); SSYNC(); /* Program the divisor to get the baud rate we want */ *pUART_DLL = LOB(divisor); *pUART_DLH = HIB(divisor); SSYNC(); /* Clear DLAB in LCR to Access THR RBR IER */ ACCESS_PORT_IER(); SSYNC(); } __attribute__((always_inline)) static inline uint16_t serial_early_get_div(void) { /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH(); SSYNC(); uint8_t dll = *pUART_DLL; uint8_t dlh = *pUART_DLH; uint16_t divisor = (dlh << 8) | dll; /* Clear DLAB in LCR to Access THR RBR IER */ ACCESS_PORT_IER(); SSYNC(); return divisor; } /* We cannot use get_sclk() early on as it uses caches in external memory */ #if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) # define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV) #endif __attribute__((always_inline)) static inline void serial_early_set_baud(uint32_t baud) { /* Translate from baud into divisor in terms of SCLK. The * weird multiplication is to make sure we over sample just * a little rather than under sample the incoming signals. */ serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230); } #ifndef BFIN_IN_INITCODE __attribute__((always_inline)) static inline void serial_early_puts(const char *s) { if (BFIN_DEBUG_EARLY_SERIAL) { serial_puts("Early: "); serial_puts(s); } } #endif #else .macro serial_early_init #ifdef CONFIG_DEBUG_EARLY_SERIAL call _serial_initialize; #endif .endm .macro serial_early_set_baud #ifdef CONFIG_DEBUG_EARLY_SERIAL R0.L = LO(CONFIG_BAUDRATE); R0.H = HI(CONFIG_BAUDRATE); call _serial_set_baud; #endif .endm /* Since we embed the string right into our .text section, we need * to find its address. We do this by getting our PC and adding 2 * bytes (which is the length of the jump instruction). Then we * pass this address to serial_puts(). */ #ifdef CONFIG_DEBUG_EARLY_SERIAL # define serial_early_puts(str) \ call _get_pc; \ jump 1f; \ .ascii "Early:"; \ .ascii __FILE__; \ .ascii ": "; \ .ascii str; \ .asciz "\n"; \ .align 4; \ 1: \ R0 += 2; \ call _serial_puts; #else # define serial_early_puts(str) #endif #endif #endif