/*------------------------------------------------------------------------------+ * * This source code has been made available to you by IBM on an AS-IS * basis. Anyone receiving this source is licensed under IBM * copyrights to use it in any way he or she deems fit, including * copying it, modifying it, compiling it, and redistributing it either * with or without modifications. No license under IBM patents or * patent applications is to be implied by the copyright license. * * Any user of this software should understand that IBM cannot provide * technical support for this software and will not be responsible for * any consequences resulting from the use of this software. * * Any person who transfers this source code or any derivative work * must include the IBM copyright notice, this paragraph, and the * preceding two paragraphs in the transferred software. * * COPYRIGHT I B M CORPORATION 1995 * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M *-------------------------------------------------------------------------------*/ /*----------------------------------------------------------------------------- * Function: ext_bus_cntlr_init * Description: Initializes the External Bus Controller for the external * peripherals. IMPORTANT: For pass1 this code must run from * cache since you can not reliably change a peripheral banks * timing register (pbxap) while running code from that bank. * For ex., since we are running from ROM on bank 0, we can NOT * execute the code that modifies bank 0 timings from ROM, so * we run it from cache. * Bank 0 - Flash or Multi Purpose Socket * Bank 1 - Multi Purpose Socket or Flash * Bank 2 - not used * Bank 3 - not used * Bank 4 - not used * Bank 5 - not used * Bank 6 - used to switch on the 12V for the Multipurpose socket * Bank 7 - Config Register *-----------------------------------------------------------------------------*/ #include #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include "configs/PIP405.h" #include #include #include #include .globl ext_bus_cntlr_init ext_bus_cntlr_init: mflr r4 /* save link register */ bl ..getAddr ..getAddr: mflr r3 /* get address of ..getAddr */ mtlr r4 /* restore link register */ addi r4,0,14 /* set ctr to 14; used to prefetch */ mtctr r4 /* 14 cache lines to fit this function */ /* in cache (gives us 8x14=112 instrctns) */ ..ebcloop: icbt r0,r3 /* prefetch cache line for addr in r3 */ addi r3,r3,32 /* move to next cache line */ bdnz ..ebcloop /* continue for 14 cache lines */ /*------------------------------------------------------------------- * Delay to ensure all accesses to ROM are complete before changing * bank 0 timings. *------------------------------------------------------------------- */ addis r3,0,0x0 ori r3,r3,0xA000 mtctr r3 ..spinlp: bdnz ..spinlp /* spin loop */ /*----------------------------------------------------------------------- * decide boot up mode *----------------------------------------------------------------------- */ addi r4,0,pb0cr mtdcr ebccfga,r4 mfdcr r4,ebccfgd andi. r0, r4, 0x2000 /* mask out irrelevant bits */ beq 0f /* jump if 8 bit bus width */ /* setup 16 bit things *----------------------------------------------------------------------- * Memory Bank 0 (16 Bit Flash) initialization *---------------------------------------------------------------------- */ addi r4,0,pb0ap mtdcr ebccfga,r4 addis r4,0,0x9B01 ori r4,r4,0x5480 mtdcr ebccfgd,r4 addi r4,0,pb0cr mtdcr ebccfga,r4 /* BS=0x011(8MB),BU=0x3(R/W), */ addis r4,0,((FLASH_BASE0_PRELIM & 0xFFF00000) | 0x00050000)@h ori r4,r4,0xA000 /* BW=0x01(16 bits) */ mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- * Memory Bank 1 (Multi Purpose Socket) initialization *----------------------------------------------------------------------*/ addi r4,0,pb1ap mtdcr ebccfga,r4 addis r4,0,0x0281 ori r4,r4,0x5480 mtdcr ebccfgd,r4 addi r4,0,pb1cr mtdcr ebccfga,r4 /* BS=0x011(8MB),BU=0x3(R/W), */ addis r4,0,((MULTI_PURPOSE_SOCKET_ADDR & 0xFFF00000) | 0x00050000)@h ori r4,r4,0x8000 /* BW=0x0( 8 bits) */ mtdcr ebccfgd,r4 b 1f 0: /* 8Bit boot mode: */ /*----------------------------------------------------------------------- * Memory Bank 0 Multi Purpose Socket initialization *----------------------------------------------------------------------- */ addi r4,0,pb0ap mtdcr ebccfga,r4 addis r4,0,0x9B01 ori r4,r4,0x5480 mtdcr ebccfgd,r4 addi r4,0,pb0cr mtdcr ebccfga,r4 /* BS=0x011(4MB),BU=0x3(R/W), */ addis r4,0,((FLASH_BASE0_PRELIM & 0xFFF00000) | 0x00050000)@h ori r4,r4,0x8000 /* BW=0x0( 8 bits) */ mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- * Memory Bank 1 (Flash) initialization *-----------------------------------------------------------------------*/ addi r4,0,pb1ap mtdcr ebccfga,r4 addis r4,0,0x0281 ori r4,r4,0x5480 mtdcr ebccfgd,r4 addi r4,0,pb1cr mtdcr ebccfga,r4 /* BS=0x011(8MB),BU=0x3(R/W), */ addis r4,0,((MULTI_PURPOSE_SOCKET_ADDR & 0xFFF00000) | 0x00050000)@h ori r4,r4,0xA000 /* BW=0x0( 8 bits) */ mtdcr ebccfgd,r4 1: /*----------------------------------------------------------------------- * Memory Bank 2-3-4-5-6 (not used) initialization *-----------------------------------------------------------------------*/ addi r4,0,pb2cr mtdcr ebccfga,r4 addis r4,0,0x0000 ori r4,r4,0x0000 mtdcr ebccfgd,r4 addi r4,0,pb3cr mtdcr ebccfga,r4 addis r4,0,0x0000 ori r4,r4,0x0000 mtdcr ebccfgd,r4 addi r4,0,pb4cr mtdcr ebccfga,r4 addis r4,0,0x0000 ori r4,r4,0x0000 mtdcr ebccfgd,r4 addi r4,0,pb5cr mtdcr ebccfga,r4 addis r4,0,0x0000 ori r4,r4,0x0000 mtdcr ebccfgd,r4 addi r4,0,pb6cr mtdcr ebccfga,r4 addis r4,0,0x0000 ori r4,r4,0x0000 mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- * Memory Bank 7 (Config Register) initialization *----------------------------------------------------------------------- */ addi r4,0,pb7ap mtdcr ebccfga,r4 addis r4,0,0x0181 /* Doc says TWT=3 and Openios TWT=3!! */ ori r4,r4,0x5280 /* disable Ready, BEM=0 */ mtdcr ebccfgd,r4 addi r4,0,pb7cr mtdcr ebccfga,r4 /* BS=0x0(1MB),BU=0x3(R/W), */ addis r4,0,((CONFIG_PORT_ADDR & 0xFFF00000) | 0x00010000)@h ori r4,r4,0x8000 /* BW=0x0(8 bits) */ mtdcr ebccfgd,r4 nop /* pass2 DCR errata #8 */ blr /*----------------------------------------------------------------------------- * Function: sdram_init * Description: Configures the internal SRAM memory. and setup the * Stackpointer in it. *----------------------------------------------------------------------------- */ .globl sdram_init sdram_init: blr