/* * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include #endif DECLARE_GLOBAL_DATA_PTR; /* ------------------------------------------------------------------------- */ /* * Miscelaneous platform dependent initialisations */ #ifdef CONFIG_CMD_NAND static void at91sam9rlek_nand_hw_init(void) { unsigned long csa; /* Enable CS3 */ csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* Configure SMC CS3 for NAND/SmartMedia */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | #ifdef CONFIG_SYS_NAND_DBW_16 AT91_SMC_DBW_16 | #else /* CONFIG_SYS_NAND_DBW_8 */ AT91_SMC_DBW_8 | #endif AT91_SMC_TDF_(2)); at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD); /* Configure RDY/BSY */ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */ at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ } #endif #ifdef CONFIG_LCD vidinfo_t panel_info = { vl_col: 240, vl_row: 320, vl_clk: 4965000, vl_sync: ATMEL_LCDC_INVLINE_INVERTED | ATMEL_LCDC_INVFRAME_INVERTED, vl_bpix: 3, vl_tft: 1, vl_hsync_len: 5, vl_left_margin: 1, vl_right_margin:33, vl_vsync_len: 1, vl_upper_margin:1, vl_lower_margin:0, mmio: AT91SAM9RL_LCDC_BASE, }; void lcd_enable(void) { at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ } void lcd_disable(void) { at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ } static void at91sam9rlek_lcd_hw_init(void) { at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */ at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */ at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */ at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */ at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */ at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */ at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */ at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */ at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */ at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */ at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */ at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */ at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */ at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */ at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */ at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_LCDC); gd->fb_base = 0; } #ifdef CONFIG_LCD_INFO #include #include void lcd_show_board_info(void) { ulong dram_size, nand_size; int i; char temp[32]; lcd_printf ("%s\n", U_BOOT_VERSION); lcd_printf ("(C) 2008 ATMEL Corp\n"); lcd_printf ("at91support@atmel.com\n"); lcd_printf ("%s CPU at %s MHz\n", CONFIG_SYS_AT91_CPU_NAME, strmhz(temp, get_cpu_clk_rate())); dram_size = 0; for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) dram_size += gd->bd->bi_dram[i].size; nand_size = 0; for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) nand_size += nand_info[i].size; lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", dram_size >> 20, nand_size >> 20 ); } #endif /* CONFIG_LCD_INFO */ #endif int board_init(void) { /* Enable Ctrlc */ console_init_f(); /* arch number of AT91SAM9RLEK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK; /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND at91sam9rlek_nand_hw_init(); #endif #ifdef CONFIG_HAS_DATAFLASH at91_spi0_hw_init(1 << 0); #endif #ifdef CONFIG_LCD at91sam9rlek_lcd_hw_init(); #endif return 0; } int dram_init(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; }