/* * * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #if defined(CONFIG_CMD_NET) #include #include #include #endif /* * Breath some life into the CPU... * * Set up the memory map, * initialize a bunch of registers, * initialize the UPM's */ void cpu_init_f(void) { gpio_t *gpio = (gpio_t *) MMAP_GPIO; fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; xlbarb_t *xlbarb = (xlbarb_t *) MMAP_XARB; out_be32(&xlbarb->adrto, 0x2000); out_be32(&xlbarb->datto, 0x2500); out_be32(&xlbarb->busto, 0x3000); out_be32(&xlbarb->cfg, XARB_CFG_AT | XARB_CFG_DT); /* Master Priority Enable */ out_be32(&xlbarb->prien, 0xff); out_be32(&xlbarb->pri, 0); #if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK); #endif #if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL)) out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE); out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL); out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK); #endif #if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL)) out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE); out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL); out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK); #endif #if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL)) out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE); out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL); out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK); #endif #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL)) out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE); out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL); out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK); #endif #if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL)) out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE); out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL); out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK); #endif #ifdef CONFIG_FSL_I2C out_be16(&gpio->par_feci2cirq, GPIO_PAR_FECI2CIRQ_SCL | GPIO_PAR_FECI2CIRQ_SDA); #endif icache_enable(); } /* * initialize higher level parts of CPU like timers */ int cpu_init_r(void) { #if defined(CONFIG_CMD_NET) && defined(CONFIG_FSLDMAFEC) MCD_initDma((dmaRegs *) (MMAP_MCDMA), (void *)(MMAP_SRAM + 512), MCD_RELOC_TASKS); #endif return (0); } void uart_port_conf(int port) { gpio_t *gpio = (gpio_t *) MMAP_GPIO; u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40); /* Setup Ports: */ switch (port) { case 0: out_8(&gpio->par_psc0, GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0); break; case 1: out_8(&gpio->par_psc1, GPIO_PAR_PSC1_TXD1 | GPIO_PAR_PSC1_RXD1); break; case 2: out_8(&gpio->par_psc2, GPIO_PAR_PSC2_TXD2 | GPIO_PAR_PSC2_RXD2); break; case 3: out_8(&gpio->par_psc3, GPIO_PAR_PSC3_TXD3 | GPIO_PAR_PSC3_RXD3); break; } clrbits_8(pscsicr, 0x07); } #if defined(CONFIG_CMD_NET) int fecpin_setclear(struct eth_device *dev, int setclear) { gpio_t *gpio = (gpio_t *) MMAP_GPIO; struct fec_info_dma *info = (struct fec_info_dma *)dev->priv; if (setclear) { if (info->iobase == CONFIG_SYS_FEC0_IOBASE) setbits_be16(&gpio->par_feci2cirq, 0xf000); else setbits_be16(&gpio->par_feci2cirq, 0x0fc0); } else { if (info->iobase == CONFIG_SYS_FEC0_IOBASE) clrbits_be16(&gpio->par_feci2cirq, 0xf000); else clrbits_be16(&gpio->par_feci2cirq, 0x0fc0); } return 0; } #endif