/* * Address map functions for Marvell EBU SoCs (Kirkwood, Armada * 370/XP, Dove, Orion5x and MV78xx0) * * Ported from the Barebox version to U-Boot by: * Stefan Roese * * The Barebox version is: * Sebastian Hesselbarth * * based on mbus driver from Linux * (C) Copyright 2008 Marvell Semiconductor * * SPDX-License-Identifier: GPL-2.0 * * The Marvell EBU SoCs have a configurable physical address space: * the physical address at which certain devices (PCIe, NOR, NAND, * etc.) sit can be configured. The configuration takes place through * two sets of registers: * * - One to configure the access of the CPU to the devices. Depending * on the families, there are between 8 and 20 configurable windows, * each can be use to create a physical memory window that maps to a * specific device. Devices are identified by a tuple (target, * attribute). * * - One to configure the access to the CPU to the SDRAM. There are * either 2 (for Dove) or 4 (for other families) windows to map the * SDRAM into the physical address space. * * This driver: * * - Reads out the SDRAM address decoding windows at initialization * time, and fills the mbus_dram_info structure with these * informations. The exported function mv_mbus_dram_info() allow * device drivers to get those informations related to the SDRAM * address decoding windows. This is because devices also have their * own windows (configured through registers that are part of each * device register space), and therefore the drivers for Marvell * devices have to configure those device -> SDRAM windows to ensure * that DMA works properly. * * - Provides an API for platform code or device drivers to * dynamically add or remove address decoding windows for the CPU -> * device accesses. This API is mvebu_mbus_add_window_by_id(), * mvebu_mbus_add_window_remap_by_id() and * mvebu_mbus_del_window(). */ #include #include #include #include #include #include #define BIT(nr) (1UL << (nr)) /* DDR target is the same on all platforms */ #define TARGET_DDR 0 /* CPU Address Decode Windows registers */ #define WIN_CTRL_OFF 0x0000 #define WIN_CTRL_ENABLE BIT(0) #define WIN_CTRL_TGT_MASK 0xf0 #define WIN_CTRL_TGT_SHIFT 4 #define WIN_CTRL_ATTR_MASK 0xff00 #define WIN_CTRL_ATTR_SHIFT 8 #define WIN_CTRL_SIZE_MASK 0xffff0000 #define WIN_CTRL_SIZE_SHIFT 16 #define WIN_BASE_OFF 0x0004 #define WIN_BASE_LOW 0xffff0000 #define WIN_BASE_HIGH 0xf #define WIN_REMAP_LO_OFF 0x0008 #define WIN_REMAP_LOW 0xffff0000 #define WIN_REMAP_HI_OFF 0x000c #define ATTR_HW_COHERENCY (0x1 << 4) #define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) #define DDR_BASE_CS_HIGH_MASK 0xf #define DDR_BASE_CS_LOW_MASK 0xff000000 #define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) #define DDR_SIZE_ENABLED BIT(0) #define DDR_SIZE_CS_MASK 0x1c #define DDR_SIZE_CS_SHIFT 2 #define DDR_SIZE_MASK 0xff000000 #define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4) struct mvebu_mbus_state; struct mvebu_mbus_soc_data { unsigned int num_wins; unsigned int num_remappable_wins; unsigned int (*win_cfg_offset)(const int win); void (*setup_cpu_target)(struct mvebu_mbus_state *s); }; struct mvebu_mbus_state mbus_state __attribute__ ((section(".data"))); static struct mbus_dram_target_info mbus_dram_info __attribute__ ((section(".data"))); /* * Functions to manipulate the address decoding windows */ static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus, int win, int *enabled, u64 *base, u32 *size, u8 *target, u8 *attr, u64 *remap) { void __iomem *addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); u32 basereg = readl(addr + WIN_BASE_OFF); u32 ctrlreg = readl(addr + WIN_CTRL_OFF); if (!(ctrlreg & WIN_CTRL_ENABLE)) { *enabled = 0; return; } *enabled = 1; *base = ((u64)basereg & WIN_BASE_HIGH) << 32; *base |= (basereg & WIN_BASE_LOW); *size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1; if (target) *target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT; if (attr) *attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT; if (remap) { if (win < mbus->soc->num_remappable_wins) { u32 remap_low = readl(addr + WIN_REMAP_LO_OFF); u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF); *remap = ((u64)remap_hi << 32) | remap_low; } else { *remap = 0; } } } static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus, int win) { void __iomem *addr; addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); writel(0, addr + WIN_BASE_OFF); writel(0, addr + WIN_CTRL_OFF); if (win < mbus->soc->num_remappable_wins) { writel(0, addr + WIN_REMAP_LO_OFF); writel(0, addr + WIN_REMAP_HI_OFF); } } /* Checks whether the given window number is available */ static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus, const int win) { void __iomem *addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); u32 ctrl = readl(addr + WIN_CTRL_OFF); return !(ctrl & WIN_CTRL_ENABLE); } /* * Checks whether the given (base, base+size) area doesn't overlap an * existing region */ static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus, phys_addr_t base, size_t size, u8 target, u8 attr) { u64 end = (u64)base + size; int win; for (win = 0; win < mbus->soc->num_wins; win++) { u64 wbase, wend; u32 wsize; u8 wtarget, wattr; int enabled; mvebu_mbus_read_window(mbus, win, &enabled, &wbase, &wsize, &wtarget, &wattr, NULL); if (!enabled) continue; wend = wbase + wsize; /* * Check if the current window overlaps with the * proposed physical range */ if ((u64)base < wend && end > wbase) return 0; /* * Check if target/attribute conflicts */ if (target == wtarget && attr == wattr) return 0; } return 1; } static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus, phys_addr_t base, size_t size) { int win; for (win = 0; win < mbus->soc->num_wins; win++) { u64 wbase; u32 wsize; int enabled; mvebu_mbus_read_window(mbus, win, &enabled, &wbase, &wsize, NULL, NULL, NULL); if (!enabled) continue; if (base == wbase && size == wsize) return win; } return -ENODEV; } static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, int win, phys_addr_t base, size_t size, phys_addr_t remap, u8 target, u8 attr) { void __iomem *addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); u32 ctrl, remap_addr; ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | (attr << WIN_CTRL_ATTR_SHIFT) | (target << WIN_CTRL_TGT_SHIFT) | WIN_CTRL_ENABLE; writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF); writel(ctrl, addr + WIN_CTRL_OFF); if (win < mbus->soc->num_remappable_wins) { if (remap == MVEBU_MBUS_NO_REMAP) remap_addr = base; else remap_addr = remap; writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF); writel(0, addr + WIN_REMAP_HI_OFF); } return 0; } static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus, phys_addr_t base, size_t size, phys_addr_t remap, u8 target, u8 attr) { int win; if (remap == MVEBU_MBUS_NO_REMAP) { for (win = mbus->soc->num_remappable_wins; win < mbus->soc->num_wins; win++) if (mvebu_mbus_window_is_free(mbus, win)) return mvebu_mbus_setup_window(mbus, win, base, size, remap, target, attr); } for (win = 0; win < mbus->soc->num_wins; win++) if (mvebu_mbus_window_is_free(mbus, win)) return mvebu_mbus_setup_window(mbus, win, base, size, remap, target, attr); return -ENOMEM; } /* * SoC-specific functions and definitions */ static unsigned int armada_370_xp_mbus_win_offset(int win) { /* The register layout is a bit annoying and the below code * tries to cope with it. * - At offset 0x0, there are the registers for the first 8 * windows, with 4 registers of 32 bits per window (ctrl, * base, remap low, remap high) * - Then at offset 0x80, there is a hole of 0x10 bytes for * the internal registers base address and internal units * sync barrier register. * - Then at offset 0x90, there the registers for 12 * windows, with only 2 registers of 32 bits per window * (ctrl, base). */ if (win < 8) return win << 4; else return 0x90 + ((win - 8) << 3); } static unsigned int orion5x_mbus_win_offset(int win) { return win << 4; } static void mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) { int i; int cs; mbus_dram_info.mbus_dram_target_id = TARGET_DDR; for (i = 0, cs = 0; i < 4; i++) { u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); /* * We only take care of entries for which the chip * select is enabled, and that don't have high base * address bits set (devices can only access the first * 32 bits of the memory). */ if ((size & DDR_SIZE_ENABLED) && !(base & DDR_BASE_CS_HIGH_MASK)) { struct mbus_dram_window *w; w = &mbus_dram_info.cs[cs++]; w->cs_index = i; w->mbus_attr = 0xf & ~(1 << i); #if defined(CONFIG_ARMADA_XP) w->mbus_attr |= ATTR_HW_COHERENCY; #endif w->base = base & DDR_BASE_CS_LOW_MASK; w->size = (size | ~DDR_SIZE_MASK) + 1; } } mbus_dram_info.num_cs = cs; } static const struct mvebu_mbus_soc_data armada_370_xp_mbus_data __maybe_unused = { .num_wins = 20, .num_remappable_wins = 8, .win_cfg_offset = armada_370_xp_mbus_win_offset, .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, }; static const struct mvebu_mbus_soc_data kirkwood_mbus_data __maybe_unused = { .num_wins = 8, .num_remappable_wins = 4, .win_cfg_offset = orion5x_mbus_win_offset, .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, }; /* * Public API of the driver */ const struct mbus_dram_target_info *mvebu_mbus_dram_info(void) { return &mbus_dram_info; } int mvebu_mbus_add_window_remap_by_id(unsigned int target, unsigned int attribute, phys_addr_t base, size_t size, phys_addr_t remap) { struct mvebu_mbus_state *s = &mbus_state; if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) { printf("Cannot add window '%x:%x', conflicts with another window\n", target, attribute); return -EINVAL; } return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute); } int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, phys_addr_t base, size_t size) { return mvebu_mbus_add_window_remap_by_id(target, attribute, base, size, MVEBU_MBUS_NO_REMAP); } int mvebu_mbus_del_window(phys_addr_t base, size_t size) { int win; win = mvebu_mbus_find_window(&mbus_state, base, size); if (win < 0) return win; mvebu_mbus_disable_window(&mbus_state, win); return 0; } int mbus_dt_setup_win(struct mvebu_mbus_state *mbus, u32 base, u32 size, u8 target, u8 attr) { if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) { printf("Cannot add window '%04x:%04x', conflicts with another window\n", target, attr); return -EBUSY; } /* * In U-Boot we first try to add the mbus window to the remap windows. * If this fails, lets try to add the windows to the non-remap windows. */ if (mvebu_mbus_alloc_window(mbus, base, size, base, target, attr)) { if (mvebu_mbus_alloc_window(mbus, base, size, MVEBU_MBUS_NO_REMAP, target, attr)) return -ENOMEM; } return 0; } int mvebu_mbus_probe(struct mbus_win windows[], int count) { int win; int ret; int i; #if defined(CONFIG_KIRKWOOD) mbus_state.soc = &kirkwood_mbus_data; #endif #if defined(CONFIG_ARMADA_XP) mbus_state.soc = &armada_370_xp_mbus_data; #endif mbus_state.mbuswins_base = (void __iomem *)MVEBU_CPU_WIN_BASE; mbus_state.sdramwins_base = (void __iomem *)MVEBU_SDRAM_BASE; for (win = 0; win < mbus_state.soc->num_wins; win++) mvebu_mbus_disable_window(&mbus_state, win); mbus_state.soc->setup_cpu_target(&mbus_state); /* Setup statically declared windows in the DT */ for (i = 0; i < count; i++) { u32 base, size; u8 target, attr; target = windows[i].target; attr = windows[i].attr; base = windows[i].base; size = windows[i].size; ret = mbus_dt_setup_win(&mbus_state, base, size, target, attr); if (ret < 0) return ret; } return 0; }