/* * Copyright (C) 2012-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include "micro-support-card.h" #define MICRO_SUPPORT_CARD_BASE 0x43f00000 #define SMC911X_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x00000) #define LED_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x90000) #define NS16550A_BASE ((MICRO_SUPPORT_CARD_BASE) + 0xb0000) #define MICRO_SUPPORT_CARD_RESET ((MICRO_SUPPORT_CARD_BASE) + 0xd0034) #define MICRO_SUPPORT_CARD_REVISION ((MICRO_SUPPORT_CARD_BASE) + 0xd00E0) /* * 0: reset deassert, 1: reset * * bit[0]: LAN, I2C, LED * bit[1]: UART */ void support_card_reset_deassert(void) { writel(0, MICRO_SUPPORT_CARD_RESET); } void support_card_reset(void) { writel(3, MICRO_SUPPORT_CARD_RESET); } static int support_card_show_revision(void) { u32 revision; revision = readl(MICRO_SUPPORT_CARD_REVISION); printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf); return 0; } int check_support_card(void) { printf("SC: Micro Support Card "); return support_card_show_revision(); } void support_card_init(void) { /* * After power on, we need to keep the LAN controller in reset state * for a while. (200 usec) * Fortunately, enough wait time is already inserted in pll_init() * function. So we do not have to wait here. */ support_card_reset_deassert(); } #if defined(CONFIG_SMC911X) #include int board_eth_init(bd_t *bis) { return smc911x_initialize(0, SMC911X_BASE); } #endif #if !defined(CONFIG_SYS_NO_FLASH) #include struct memory_bank { phys_addr_t base; unsigned long size; }; static int mem_is_flash(const struct memory_bank *mem) { const int loop = 128; u32 *scratch_addr; u32 saved_value; int ret = 1; int i; /* just in case, use the tail of the memory bank */ scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop, sizeof(u32) * loop, MAP_NOCACHE); for (i = 0; i < loop; i++, scratch_addr++) { saved_value = readl(scratch_addr); writel(~saved_value, scratch_addr); if (readl(scratch_addr) != saved_value) { /* We assume no memory or SRAM here. */ writel(saved_value, scratch_addr); ret = 0; break; } } unmap_physmem(scratch_addr, MAP_NOCACHE); return ret; } /* {address, size} */ static const struct memory_bank memory_banks[] = { {0x42000000, 0x01f00000}, }; static const struct memory_bank *flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; phys_addr_t cfi_flash_bank_addr(int i) { return flash_banks_list[i]->base; } unsigned long cfi_flash_bank_size(int i) { return flash_banks_list[i]->size; } static void detect_num_flash_banks(void) { const struct memory_bank *memory_bank, *end; cfi_flash_num_flash_banks = 0; memory_bank = memory_banks; end = memory_bank + ARRAY_SIZE(memory_banks); for (; memory_bank < end; memory_bank++) { if (cfi_flash_num_flash_banks >= CONFIG_SYS_MAX_FLASH_BANKS_DETECT) break; if (mem_is_flash(memory_bank)) { flash_banks_list[cfi_flash_num_flash_banks] = memory_bank; debug("flash bank found: base = 0x%lx, size = 0x%lx\n", (unsigned long)memory_bank->base, (unsigned long)memory_bank->size); cfi_flash_num_flash_banks++; } } debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); } #else /* CONFIG_SYS_NO_FLASH */ void detect_num_flash_banks(void) { }; #endif /* CONFIG_SYS_NO_FLASH */ void support_card_late_init(void) { detect_num_flash_banks(); } static const u8 ledval_num[] = { 0x7e, /* 0 */ 0x0c, /* 1 */ 0xb6, /* 2 */ 0x9e, /* 3 */ 0xcc, /* 4 */ 0xda, /* 5 */ 0xfa, /* 6 */ 0x4e, /* 7 */ 0xfe, /* 8 */ 0xde, /* 9 */ }; static const u8 ledval_alpha[] = { 0xee, /* A */ 0xf8, /* B */ 0x72, /* C */ 0xbc, /* D */ 0xf2, /* E */ 0xe2, /* F */ 0x7a, /* G */ 0xe8, /* H */ 0x08, /* I */ 0x3c, /* J */ 0xea, /* K */ 0x70, /* L */ 0x6e, /* M */ 0xa8, /* N */ 0xb8, /* O */ 0xe6, /* P */ 0xce, /* Q */ 0xa0, /* R */ 0xc8, /* S */ 0x8c, /* T */ 0x7c, /* U */ 0x54, /* V */ 0xfc, /* W */ 0xec, /* X */ 0xdc, /* Y */ 0xa4, /* Z */ }; static u8 char2ledval(char c) { if (isdigit(c)) return ledval_num[c - '0']; else if (isalpha(c)) return ledval_alpha[toupper(c) - 'A']; return 0; } void led_puts(const char *s) { int i; u32 val = 0; if (!s) return; for (i = 0; i < 4; i++) { val <<= 8; val |= char2ledval(*s); if (*s != '\0') s++; } writel(~val, LED_BASE); }