/* * Intel LXT971/LXT972 PHY Driver for TI DaVinci * (TMS320DM644x) based boards. * * Copyright (C) 2007 Sergey Kubushyn * * -------------------------------------------------------- * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include #include "../../../drivers/net/davinci_emac.h" #ifdef CONFIG_DRIVER_TI_EMAC #ifdef CONFIG_CMD_NET int lxt972_is_phy_connected(int phy_addr) { u_int16_t id1, id2; if (!davinci_eth_phy_read(phy_addr, MII_PHYSID1, &id1)) return(0); if (!davinci_eth_phy_read(phy_addr, MII_PHYSID2, &id2)) return(0); if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0)) return(1); return(0); } int lxt972_get_link_speed(int phy_addr) { u_int16_t stat1, tmp; volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR; if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1)) return(0); if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */ return(0); if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) return(0); tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE; davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp); /* Read back */ if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) return(0); /* Speed doesn't matter, there is no setting for it in EMAC... */ if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) { /* set DM644x EMAC for Full Duplex */ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE; } else { /*set DM644x EMAC for Half Duplex */ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; } return(1); } int lxt972_init_phy(int phy_addr) { int ret = 1; if (!lxt972_get_link_speed(phy_addr)) { /* Try another time */ ret = lxt972_get_link_speed(phy_addr); } /* Disable PHY Interrupts */ davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0); return(ret); } int lxt972_auto_negotiate(int phy_addr) { u_int16_t tmp; if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp)) return(0); /* Restart Auto_negotiation */ tmp |= BMCR_ANRESTART; davinci_eth_phy_write(phy_addr, MII_BMCR, tmp); /*check AutoNegotiate complete */ udelay (10000); if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp)) return(0); if (!(tmp & BMSR_ANEGCOMPLETE)) return(0); return (lxt972_get_link_speed(phy_addr)); } #endif /* CONFIG_CMD_NET */ #endif /* CONFIG_DRIVER_ETHER */