/* * Freescale i.MXS Register Accessors * * Copyright (C) 2011 Marek Vasut * on behalf of DENX Software Engineering GmbH * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __MXS_REGS_COMMON_H__ #define __MXS_REGS_COMMON_H__ #include /* * The i.MXS has interesting feature when it comes to register access. There * are four kinds of access to one particular register. Those are: * * 1) Common read/write access. To use this mode, just write to the address of * the register. * 2) Set bits only access. To set bits, write which bits you want to set to the * address of the register + 0x4. * 3) Clear bits only access. To clear bits, write which bits you want to clear * to the address of the register + 0x8. * 4) Toggle bits only access. To toggle bits, write which bits you want to * toggle to the address of the register + 0xc. * * IMPORTANT NOTE: Not all registers support accesses 2-4! Also, not all bits * can be set/cleared by pure write as in access type 1, some need to be * explicitly set/cleared by using access type 2-3. * * The following macros and structures allow the user to either access the * register in all aforementioned modes (by accessing reg_name, reg_name_set, * reg_name_clr, reg_name_tog) or pass the register structure further into * various functions with correct type information (by accessing reg_name_reg). * */ #define __mxs_reg_8(name) \ uint8_t name[4]; \ uint8_t name##_set[4]; \ uint8_t name##_clr[4]; \ uint8_t name##_tog[4]; \ #define __mxs_reg_32(name) \ uint32_t name; \ uint32_t name##_set; \ uint32_t name##_clr; \ uint32_t name##_tog; struct mxs_register_8 { __mxs_reg_8(reg) }; struct mxs_register_32 { __mxs_reg_32(reg) }; #define mxs_reg_8(name) \ union { \ struct { __mxs_reg_8(name) }; \ struct mxs_register_8 name##_reg; \ }; #define mxs_reg_32(name) \ union { \ struct { __mxs_reg_32(name) }; \ struct mxs_register_32 name##_reg; \ }; #endif /* __MXS_REGS_COMMON_H__ */