/* * (C) Copyright 2007-2012 * Allwinner Technology Co., Ltd. * Tom Cubie * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _SUNXI_GPIO_H #define _SUNXI_GPIO_H #include #include /* * sunxi has 9 banks of gpio, they are: * PA0 - PA17 | PB0 - PB23 | PC0 - PC24 * PD0 - PD27 | PE0 - PE31 | PF0 - PF5 * PG0 - PG9 | PH0 - PH27 | PI0 - PI12 */ #define SUNXI_GPIO_A 0 #define SUNXI_GPIO_B 1 #define SUNXI_GPIO_C 2 #define SUNXI_GPIO_D 3 #define SUNXI_GPIO_E 4 #define SUNXI_GPIO_F 5 #define SUNXI_GPIO_G 6 #define SUNXI_GPIO_H 7 #define SUNXI_GPIO_I 8 /* * This defines the number of GPIO banks for the _main_ GPIO controller. * You should fix up the padding in struct sunxi_gpio_reg below if you * change this. */ #define SUNXI_GPIO_BANKS 9 /* * sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO) * at a different register offset. * * sun6i has 2 banks: * PL0 - PL8 | PM0 - PM7 * * sun8i has 1 bank: * PL0 - PL11 * * sun9i has 3 banks: * PL0 - PL9 | PM0 - PM15 | PN0 - PN1 */ #define SUNXI_GPIO_L 11 #define SUNXI_GPIO_M 12 #define SUNXI_GPIO_N 13 struct sunxi_gpio { u32 cfg[4]; u32 dat; u32 drv[2]; u32 pull[2]; }; /* gpio interrupt control */ struct sunxi_gpio_int { u32 cfg[3]; u32 ctl; u32 sta; u32 deb; /* interrupt debounce */ }; struct sunxi_gpio_reg { struct sunxi_gpio gpio_bank[SUNXI_GPIO_BANKS]; u8 res[0xbc]; struct sunxi_gpio_int gpio_int; }; #define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_L) ? \ &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \ &((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L]) #define GPIO_BANK(pin) ((pin) >> 5) #define GPIO_NUM(pin) ((pin) & 0x1f) #define GPIO_CFG_INDEX(pin) (((pin) & 0x1f) >> 3) #define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1f) & 0x7) << 2) #define GPIO_DRV_INDEX(pin) (((pin) & 0x1f) >> 4) #define GPIO_DRV_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) #define GPIO_PULL_INDEX(pin) (((pin) & 0x1f) >> 4) #define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) /* GPIO bank sizes */ #define SUNXI_GPIO_A_NR 32 #define SUNXI_GPIO_B_NR 32 #define SUNXI_GPIO_C_NR 32 #define SUNXI_GPIO_D_NR 32 #define SUNXI_GPIO_E_NR 32 #define SUNXI_GPIO_F_NR 32 #define SUNXI_GPIO_G_NR 32 #define SUNXI_GPIO_H_NR 32 #define SUNXI_GPIO_I_NR 32 #define SUNXI_GPIO_L_NR 32 #define SUNXI_GPIO_M_NR 32 #define SUNXI_GPIO_NEXT(__gpio) \ ((__gpio##_START) + (__gpio##_NR) + 0) enum sunxi_gpio_number { SUNXI_GPIO_A_START = 0, SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A), SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B), SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C), SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D), SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E), SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F), SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G), SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H), SUNXI_GPIO_L_START = 352, SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L), SUNXI_GPIO_N_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_M), SUNXI_GPIO_AXP0_START = 1024, }; /* SUNXI GPIO number definitions */ #define SUNXI_GPA(_nr) (SUNXI_GPIO_A_START + (_nr)) #define SUNXI_GPB(_nr) (SUNXI_GPIO_B_START + (_nr)) #define SUNXI_GPC(_nr) (SUNXI_GPIO_C_START + (_nr)) #define SUNXI_GPD(_nr) (SUNXI_GPIO_D_START + (_nr)) #define SUNXI_GPE(_nr) (SUNXI_GPIO_E_START + (_nr)) #define SUNXI_GPF(_nr) (SUNXI_GPIO_F_START + (_nr)) #define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr)) #define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr)) #define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr)) #define SUNXI_GPL(_nr) (SUNXI_GPIO_L_START + (_nr)) #define SUNXI_GPM(_nr) (SUNXI_GPIO_M_START + (_nr)) #define SUNXI_GPN(_nr) (SUNXI_GPIO_N_START + (_nr)) #define SUNXI_GPAXP0(_nr) (SUNXI_GPIO_AXP0_START + (_nr)) /* GPIO pin function config */ #define SUNXI_GPIO_INPUT 0 #define SUNXI_GPIO_OUTPUT 1 #define SUNXI_GPA_EMAC 2 #define SUN6I_GPA_GMAC 2 #define SUN7I_GPA_GMAC 5 #define SUN6I_GPA_SDC2 5 #define SUN6I_GPA_SDC3 4 #define SUN8I_H3_GPA_UART0 2 #define SUN4I_GPB_TWI0 2 #define SUN4I_GPB_TWI1 2 #define SUN5I_GPB_TWI1 2 #define SUN4I_GPB_TWI2 2 #define SUN5I_GPB_TWI2 2 #define SUN4I_GPB_UART0 2 #define SUN5I_GPB_UART0 2 #define SUN8I_GPB_UART2 2 #define SUN8I_A33_GPB_UART0 3 #define SUN8I_A83T_GPB_UART0 2 #define SUN50I_GPB_UART0 4 #define SUNXI_GPC_NAND 2 #define SUNXI_GPC_SDC2 3 #define SUN6I_GPC_SDC3 4 #define SUN8I_GPD_SDC1 3 #define SUNXI_GPD_LCD0 2 #define SUNXI_GPD_LVDS0 3 #define SUN5I_GPE_SDC2 3 #define SUN8I_GPE_TWI2 3 #define SUNXI_GPF_SDC0 2 #define SUNXI_GPF_UART0 4 #define SUN8I_GPF_UART0 3 #define SUN4I_GPG_SDC1 4 #define SUN5I_GPG_SDC1 2 #define SUN6I_GPG_SDC1 2 #define SUN8I_GPG_SDC1 2 #define SUN6I_GPG_TWI3 2 #define SUN5I_GPG_UART1 4 #define SUN4I_GPH_SDC1 5 #define SUN6I_GPH_TWI0 2 #define SUN8I_GPH_TWI0 2 #define SUN6I_GPH_TWI1 2 #define SUN8I_GPH_TWI1 2 #define SUN6I_GPH_TWI2 2 #define SUN6I_GPH_UART0 2 #define SUN9I_GPH_UART0 2 #define SUNXI_GPI_SDC3 2 #define SUN7I_GPI_TWI3 3 #define SUN7I_GPI_TWI4 3 #define SUN6I_GPL0_R_P2WI_SCK 3 #define SUN6I_GPL1_R_P2WI_SDA 3 #define SUN8I_GPL_R_RSB 2 #define SUN8I_H3_GPL_R_TWI 2 #define SUN8I_A23_GPL_R_TWI 3 #define SUN8I_GPL_R_UART 2 #define SUN9I_GPN_R_RSB 3 /* GPIO pin pull-up/down config */ #define SUNXI_GPIO_PULL_DISABLE 0 #define SUNXI_GPIO_PULL_UP 1 #define SUNXI_GPIO_PULL_DOWN 2 /* Virtual AXP0 GPIOs */ #define SUNXI_GPIO_AXP0_PREFIX "AXP0-" #define SUNXI_GPIO_AXP0_VBUS_DETECT 4 #define SUNXI_GPIO_AXP0_VBUS_ENABLE 5 #define SUNXI_GPIO_AXP0_GPIO_COUNT 6 void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val); void sunxi_gpio_set_cfgpin(u32 pin, u32 val); int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset); int sunxi_gpio_get_cfgpin(u32 pin); int sunxi_gpio_set_drv(u32 pin, u32 val); int sunxi_gpio_set_pull(u32 pin, u32 val); int sunxi_name_to_gpio_bank(const char *name); int sunxi_name_to_gpio(const char *name); #define name_to_gpio(name) sunxi_name_to_gpio(name) #if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO int axp_gpio_init(void); #else static inline int axp_gpio_init(void) { return 0; } #endif #endif /* _SUNXI_GPIO_H */