/* * Copyright (C) 2012 Samsung Electronics * * Author: InKi Dae * Author: Donghwa Lee * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef _DSIM_H #define _DSIM_H #include #include #define PANEL_NAME_SIZE (32) enum mipi_dsim_interface_type { DSIM_COMMAND, DSIM_VIDEO }; enum mipi_dsim_virtual_ch_no { DSIM_VIRTUAL_CH_0, DSIM_VIRTUAL_CH_1, DSIM_VIRTUAL_CH_2, DSIM_VIRTUAL_CH_3 }; enum mipi_dsim_burst_mode_type { DSIM_NON_BURST_SYNC_EVENT, DSIM_BURST_SYNC_EVENT, DSIM_NON_BURST_SYNC_PULSE, DSIM_BURST, DSIM_NON_VIDEO_MODE }; enum mipi_dsim_no_of_data_lane { DSIM_DATA_LANE_1, DSIM_DATA_LANE_2, DSIM_DATA_LANE_3, DSIM_DATA_LANE_4 }; enum mipi_dsim_byte_clk_src { DSIM_PLL_OUT_DIV8, DSIM_EXT_CLK_DIV8, DSIM_EXT_CLK_BYPASS }; enum mipi_dsim_pixel_format { DSIM_CMD_3BPP, DSIM_CMD_8BPP, DSIM_CMD_12BPP, DSIM_CMD_16BPP, DSIM_VID_16BPP_565, DSIM_VID_18BPP_666PACKED, DSIM_18BPP_666LOOSELYPACKED, DSIM_24BPP_888 }; /* MIPI DSI Processor-to-Peripheral transaction types */ enum { MIPI_DSI_V_SYNC_START = 0x01, MIPI_DSI_V_SYNC_END = 0x11, MIPI_DSI_H_SYNC_START = 0x21, MIPI_DSI_H_SYNC_END = 0x31, MIPI_DSI_COLOR_MODE_OFF = 0x02, MIPI_DSI_COLOR_MODE_ON = 0x12, MIPI_DSI_SHUTDOWN_PERIPHERAL = 0x22, MIPI_DSI_TURN_ON_PERIPHERAL = 0x32, MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM = 0x03, MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM = 0x13, MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM = 0x23, MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM = 0x04, MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM = 0x14, MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM = 0x24, MIPI_DSI_DCS_SHORT_WRITE = 0x05, MIPI_DSI_DCS_SHORT_WRITE_PARAM = 0x15, MIPI_DSI_DCS_READ = 0x06, MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE = 0x37, MIPI_DSI_END_OF_TRANSMISSION = 0x08, MIPI_DSI_NULL_PACKET = 0x09, MIPI_DSI_BLANKING_PACKET = 0x19, MIPI_DSI_GENERIC_LONG_WRITE = 0x29, MIPI_DSI_DCS_LONG_WRITE = 0x39, MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20 = 0x0c, MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24 = 0x1c, MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16 = 0x2c, MIPI_DSI_PACKED_PIXEL_STREAM_30 = 0x0d, MIPI_DSI_PACKED_PIXEL_STREAM_36 = 0x1d, MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12 = 0x3d, MIPI_DSI_PACKED_PIXEL_STREAM_16 = 0x0e, MIPI_DSI_PACKED_PIXEL_STREAM_18 = 0x1e, MIPI_DSI_PIXEL_STREAM_3BYTE_18 = 0x2e, MIPI_DSI_PACKED_PIXEL_STREAM_24 = 0x3e, }; /* * struct mipi_dsim_config - interface for configuring mipi-dsi controller. * * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse. * @eot_disable: enable or disable EoT packet in HS mode. * @auto_vertical_cnt: specifies auto vertical count mode. * in Video mode, the vertical line transition uses line counter * configured by VSA, VBP, and Vertical resolution. * If this bit is set to '1', the line counter does not use VSA and VBP * registers.(in command mode, this variable is ignored) * @hse: set horizontal sync event mode. * In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC * start packet to MIPI DSI slave at MIPI DSI spec1.1r02. * this bit transfers HSYNC end packet in VSYNC pulse and Vporch area * (in mommand mode, this variable is ignored) * @hfp: specifies HFP disable mode. * if this variable is set, DSI master ignores HFP area in VIDEO mode. * (in command mode, this variable is ignored) * @hbp: specifies HBP disable mode. * if this variable is set, DSI master ignores HBP area in VIDEO mode. * (in command mode, this variable is ignored) * @hsa: specifies HSA disable mode. * if this variable is set, DSI master ignores HSA area in VIDEO mode. * (in command mode, this variable is ignored) * @e_interface: specifies interface to be used.(CPU or RGB interface) * @e_virtual_ch: specifies virtual channel number that main or * sub diaplsy uses. * @e_pixel_format: specifies pixel stream format for main or sub display. * @e_burst_mode: selects Burst mode in Video mode. * in Non-burst mode, RGB data area is filled with RGB data and NULL * packets, according to input bandwidth of RGB interface. * In Burst mode, RGB data area is filled with RGB data only. * @e_no_data_lane: specifies data lane count to be used by Master. * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8) * DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported. * @pll_stable_time: specifies the PLL Timer for stability of the ganerated * clock(System clock cycle base) * if the timer value goes to 0x00000000, the clock stable bit of status * and interrupt register is set. * @esc_clk: specifies escape clock frequency for getting the escape clock * prescaler value. * @stop_holding_cnt: specifies the interval value between transmitting * read packet(or write "set_tear_on" command) and BTA request. * after transmitting read packet or write "set_tear_on" command, * BTA requests to D-PHY automatically. this counter value specifies * the interval between them. * @bta_timeout: specifies the timer for BTA. * this register specifies time out from BTA request to change * the direction with respect to Tx escape clock. * @rx_timeout: specifies the timer for LP Rx mode timeout. * this register specifies time out on how long RxValid deasserts, * after RxLpdt asserts with respect to Tx escape clock. * - RxValid specifies Rx data valid indicator. * - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode. * - RxValid and RxLpdt specifies signal from D-PHY. */ struct mipi_dsim_config { unsigned char auto_flush; unsigned char eot_disable; unsigned char auto_vertical_cnt; unsigned char hse; unsigned char hfp; unsigned char hbp; unsigned char hsa; enum mipi_dsim_interface_type e_interface; enum mipi_dsim_virtual_ch_no e_virtual_ch; enum mipi_dsim_pixel_format e_pixel_format; enum mipi_dsim_burst_mode_type e_burst_mode; enum mipi_dsim_no_of_data_lane e_no_data_lane; enum mipi_dsim_byte_clk_src e_byte_clk; /* * =========================================== * | P | M | S | MHz | * ------------------------------------------- * | 3 | 100 | 3 | 100 | * | 3 | 100 | 2 | 200 | * | 3 | 63 | 1 | 252 | * | 4 | 100 | 1 | 300 | * | 4 | 110 | 1 | 330 | * | 12 | 350 | 1 | 350 | * | 3 | 100 | 1 | 400 | * | 4 | 150 | 1 | 450 | * | 6 | 118 | 1 | 472 | * | 3 | 120 | 1 | 480 | * | 12 | 250 | 0 | 500 | * | 4 | 100 | 0 | 600 | * | 3 | 81 | 0 | 648 | * | 3 | 88 | 0 | 704 | * | 3 | 90 | 0 | 720 | * | 3 | 100 | 0 | 800 | * | 12 | 425 | 0 | 850 | * | 4 | 150 | 0 | 900 | * | 12 | 475 | 0 | 950 | * | 6 | 250 | 0 | 1000 | * ------------------------------------------- */ /* * pms could be calculated as the following. * M * 24 / P * 2 ^ S = MHz */ unsigned char p; unsigned short m; unsigned char s; unsigned int pll_stable_time; unsigned long esc_clk; unsigned short stop_holding_cnt; unsigned char bta_timeout; unsigned short rx_timeout; }; /* * struct mipi_dsim_device - global interface for mipi-dsi driver. * * @dsim_config: infomation for configuring mipi-dsi controller. * @master_ops: callbacks to mipi-dsi operations. * @dsim_lcd_dev: pointer to activated ddi device. * (it would be registered by mipi-dsi driver.) * @dsim_lcd_drv: pointer to activated_ddi driver. * (it would be registered by mipi-dsi driver.) * @state: specifies status of MIPI-DSI controller. * the status could be RESET, INIT, STOP, HSCLKEN and ULPS. * @data_lane: specifiec enabled data lane number. * this variable would be set by driver according to e_no_data_lane * automatically. * @e_clk_src: select byte clock source. * @pd: pointer to MIPI-DSI driver platform data. */ struct mipi_dsim_device { struct mipi_dsim_config *dsim_config; struct mipi_dsim_master_ops *master_ops; struct mipi_dsim_lcd_device *dsim_lcd_dev; struct mipi_dsim_lcd_driver *dsim_lcd_drv; unsigned int state; unsigned int data_lane; enum mipi_dsim_byte_clk_src e_clk_src; struct exynos_platform_mipi_dsim *pd; }; /* * struct exynos_platform_mipi_dsim - interface to platform data * for mipi-dsi driver. * * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver. * lcd panel driver searched would be actived. * @dsim_config: pointer of structure for configuring mipi-dsi controller. * @lcd_panel_info: pointer for lcd panel specific structure. * this structure specifies width, height, timing and polarity and so on. * @lcd_power: callback pointer for enabling or disabling lcd power. * @mipi_power: callback pointer for enabling or disabling mipi power. * @phy_enable: pointer to a callback controlling D-PHY enable/reset */ struct exynos_platform_mipi_dsim { char lcd_panel_name[PANEL_NAME_SIZE]; struct mipi_dsim_config *dsim_config; void *lcd_panel_info; int (*lcd_power)(void); int (*mipi_power)(void); void (*phy_enable)(unsigned int dev_index, unsigned int enable); }; /* * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations. * * @cmd_write: transfer command to lcd panel at LP mode. * @cmd_read: read command from rx register. * @get_dsim_frame_done: get the status that all screen data have been * transferred to mipi-dsi. * @clear_dsim_frame_done: clear frame done status. * @get_fb_frame_done: get frame done status of display controller. * @trigger: trigger display controller. * - this one would be used only in case of CPU mode. */ struct mipi_dsim_master_ops { int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id, unsigned int data0, unsigned int data1); int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id, unsigned int data0, unsigned int data1); int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim); int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim); int (*get_fb_frame_done)(void); void (*trigger)(struct fb_info *info); }; /* * device structure for mipi-dsi based lcd panel. * * @name: name of the device to use with this device, or an * alias for that name. * @id: id of device to be registered. * @bus_id: bus id for identifing connected bus * and this bus id should be same as id of mipi_dsim_device. * @master: pointer to mipi-dsi master device object. * @platform_data: lcd panel specific platform data. */ struct mipi_dsim_lcd_device { char *name; int id; int bus_id; int reverse_panel; struct mipi_dsim_device *master; void *platform_data; }; /* * driver structure for mipi-dsi based lcd panel. * * this structure should be registered by lcd panel driver. * mipi-dsi driver seeks lcd panel registered through name field * and calls these callback functions in appropriate time. * * @name: name of the driver to use with this device, or an * alias for that name. * @id: id of driver to be registered. * this id would be used for finding device object registered. * @mipi_panel_init: callback pointer for initializing lcd panel based on mipi * dsi interface. * @mipi_display_on: callback pointer for lcd panel display on. */ struct mipi_dsim_lcd_driver { char *name; int id; int (*mipi_panel_init)(struct mipi_dsim_device *dsim_dev); void (*mipi_display_on)(struct mipi_dsim_device *dsim_dev); }; #ifdef CONFIG_EXYNOS_MIPI_DSIM int exynos_mipi_dsi_init(void); #else static inline int exynos_mipi_dsi_init(void) { return 0; } #endif /* * register mipi_dsim_lcd_driver object defined by lcd panel driver * to mipi-dsi driver. */ int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver *lcd_drv); /* * register mipi_dsim_lcd_device to mipi-dsi master. */ int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device *lcd_dev); void exynos_set_dsim_platform_data(struct exynos_platform_mipi_dsim *pd); /* panel driver init based on mipi dsi interface */ void s6e8ax0_init(void); #endif /* _DSIM_H */