/* * Copyright (C) 2012-2014 Panasonic Corporation * Author: Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) #define PFC_MICRO_SUPPORT_CARD_RESET \ ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) #define PFC_MICRO_SUPPORT_CARD_REVISION \ ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) /* * 0: reset deassert, 1: reset * * bit[0]: LAN, I2C, LED * bit[1]: UART */ void support_card_reset_deassert(void) { writel(0, PFC_MICRO_SUPPORT_CARD_RESET); } void support_card_reset(void) { writel(3, PFC_MICRO_SUPPORT_CARD_RESET); } static int support_card_show_revision(void) { u32 revision; revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION); printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf); return 0; } #endif #if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) #define DCC_MICRO_SUPPORT_CARD_RESET_LAN \ ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300) #define DCC_MICRO_SUPPORT_CARD_RESET_UART \ ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304) #define DCC_MICRO_SUPPORT_CARD_RESET_I2C \ ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308) #define DCC_MICRO_SUPPORT_CARD_REVISION \ ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0) void support_card_reset_deassert(void) { writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ } void support_card_reset(void) { writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ } static int support_card_show_revision(void) { u32 revision; revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION); if (revision >= 0x67) { printf("(DCC CPLD version 3.%d.%d)\n", revision >> 4, revision & 0xf); return 0; } else { printf("(DCC CPLD unknown version)\n"); return -1; } } #endif int check_support_card(void) { printf("SC: Micro Support Card "); return support_card_show_revision(); } void support_card_init(void) { /* * After power on, we need to keep the LAN controller in reset state * for a while. (200 usec) * Fortunatelly, enough wait time is already inserted in pll_init() * function. So we do not have to wait here. */ support_card_reset_deassert(); } #if defined(CONFIG_SMC911X) #include int board_eth_init(bd_t *bis) { return smc911x_initialize(0, CONFIG_SMC911X_BASE); } #endif #if !defined(CONFIG_SYS_NO_FLASH) #include #include struct memory_bank { phys_addr_t base; unsigned long size; }; static int mem_is_flash(const struct memory_bank *mem) { const int loop = 128; u32 *scratch_addr; u32 saved_value; int ret = 1; int i; /* just in case, use the tail of the memory bank */ scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop, sizeof(u32) * loop, MAP_NOCACHE); for (i = 0; i < loop; i++, scratch_addr++) { saved_value = readl(scratch_addr); writel(~saved_value, scratch_addr); if (readl(scratch_addr) != saved_value) { /* We assume no memory or SRAM here. */ writel(saved_value, scratch_addr); ret = 0; break; } } unmap_physmem(scratch_addr, MAP_NOCACHE); return ret; } #if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) /* {address, size} */ static const struct memory_bank memory_banks_boot_swap_off[] = { {0x02000000, 0x01f00000}, }; static const struct memory_bank memory_banks_boot_swap_on[] = { {0x00000000, 0x01f00000}, }; #endif #if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) static const struct memory_bank memory_banks_boot_swap_off[] = { {0x04000000, 0x02000000}, }; static const struct memory_bank memory_banks_boot_swap_on[] = { {0x00000000, 0x02000000}, {0x04000000, 0x02000000}, }; #endif static const struct memory_bank *flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; phys_addr_t cfi_flash_bank_addr(int i) { return flash_banks_list[i]->base; } unsigned long cfi_flash_bank_size(int i) { return flash_banks_list[i]->size; } static void detect_num_flash_banks(void) { const struct memory_bank *memory_bank, *end; cfi_flash_num_flash_banks = 0; if (boot_is_swapped()) { memory_bank = memory_banks_boot_swap_on; end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); } else { memory_bank = memory_banks_boot_swap_off; end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); } for (; memory_bank < end; memory_bank++) { if (cfi_flash_num_flash_banks >= CONFIG_SYS_MAX_FLASH_BANKS_DETECT) break; if (mem_is_flash(memory_bank)) { flash_banks_list[cfi_flash_num_flash_banks] = memory_bank; debug("flash bank found: base = 0x%lx, size = 0x%lx\n", memory_bank->base, memory_bank->size); cfi_flash_num_flash_banks++; } } debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); } #else /* ONFIG_SYS_NO_FLASH */ void detect_num_flash_banks(void) { }; #endif /* ONFIG_SYS_NO_FLASH */ void support_card_late_init(void) { detect_num_flash_banks(); }