From 23869bf80b68af9ef1802b9e556f4fd0e9e57fe5 Mon Sep 17 00:00:00 2001 From: Dustin Byford Date: Thu, 6 Mar 2014 20:48:22 -0800 Subject: fw_env: calculate default number of env sectors The assumed number of environment sectors (always 1) leads to an incorrect top_of_range calculation in fw.env.c when a flash device has an erase block size smaller than the environment data size (number of environment sectors > 1). This change updates the default number of environment sectors to at least cover the size of the environment. Also corrected a false statement about the number of sectors column in fw_env.config. Signed-off-by: Dustin Byford --- tools/env/fw_env.config | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools/env/fw_env.config') diff --git a/tools/env/fw_env.config b/tools/env/fw_env.config index 90e499da1e..c9b9f6a160 100644 --- a/tools/env/fw_env.config +++ b/tools/env/fw_env.config @@ -1,7 +1,7 @@ # Configuration file for fw_(printenv/setenv) utility. # Up to two entries are valid, in this case the redundant # environment sector is assumed present. -# Notice, that the "Number of sectors" is ignored on NOR and SPI-dataflash. +# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash. # Futhermore, if the Flash sector size is ommitted, this value is assumed to # be the same as the Environment size, which is valid for NOR and SPI-dataflash -- cgit v1.2.1