From 9ea7f3a6d8d0ef9f618e0cb0b785c00cfd5f3183 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 30 Oct 2014 18:28:01 +0900 Subject: Remove unused files [1] arch/arm/include/asm/arch-at91/at91_shdwn.h The top9000 was the last board to use this header file. It was removed by commit d58a9451e733 (ppc/arm: zap EMK boards). [2] board/matrix_vision/common/* Some Matrix Vision boards were dropped by commit e7a565638a7a (powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7) and commit af55e35d3389 (powerpc: mpc5xxx: remove board support for MVBC_P and MVSMR). Since then these files have been unused. [3] include/usb/omap1510_udc.h The omap5912osk was the last board to use this header file. It was removed by commit 62d636aa2ac2 (omap: remove omap5912osk board support). Signed-off-by: Masahiro Yamada Acked-By: Wolfgang Denk --- include/usb/omap1510_udc.h | 174 --------------------------------------------- 1 file changed, 174 deletions(-) delete mode 100644 include/usb/omap1510_udc.h (limited to 'include/usb') diff --git a/include/usb/omap1510_udc.h b/include/usb/omap1510_udc.h deleted file mode 100644 index adfbf54996..0000000000 --- a/include/usb/omap1510_udc.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - * (C) Copyright 2003 - * Gerry Hamel, geh@ti.com, Texas Instruments - * - * Based on - * linux/drivers/usb/device/bi/omap.h - * Register definitions for TI OMAP1510 USB bus interface driver - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2003 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __USBDCORE_OMAP1510_H__ -#define __USBDCORE_OMAP1510_H__ - - -/* - * 13.2 MPU Register Map - */ - -/* Table 13-1. USB Function Module Registers (endpoint) */ -#define UDC_BASE 0xFFFB4000 -#define UDC_OFFSET(offset) (UDC_BASE + (offset)) -#define UDC_REV UDC_OFFSET(0x0) /* Revision */ -#define UDC_EP_NUM UDC_OFFSET(0x4) /* Endpoint selection */ -#define UDC_DATA UDC_OFFSET(0x08) /* Data */ -#define UDC_CTRL UDC_OFFSET(0x0C) /* Control */ -#define UDC_STAT_FLG UDC_OFFSET(0x10) /* Status flag */ -#define UDC_RXFSTAT UDC_OFFSET(0x14) /* Receive FIFO status */ -#define UDC_SYSCON1 UDC_OFFSET(0x18) /* System configuration 1 */ -#define UDC_SYSCON2 UDC_OFFSET(0x1C) /* System configuration 2 */ -#define UDC_DEVSTAT UDC_OFFSET(0x20) /* Device status */ -#define UDC_SOF UDC_OFFSET(0x24) /* Start of frame */ -#define UDC_IRQ_EN UDC_OFFSET(0x28) /* Interrupt enable */ -#define UDC_DMA_IRQ_EN UDC_OFFSET(0x2C) /* DMA interrupt enable */ -#define UDC_IRQ_SRC UDC_OFFSET(0x30) /* Interrupt source */ -#define UDC_EPN_STAT UDC_OFFSET(0x34) /* Endpoint interrupt status */ -#define UDC_DMAN_STAT UDC_OFFSET(0x3C) /* DMA endpoint interrupt status */ - -/* IRQ_EN register fields */ -#define UDC_Sof_IE (1 << 7) /* Start-of-frame interrupt enabled */ -#define UDC_EPn_RX_IE (1 << 5) /* Receive endpoint interrupt enabled */ -#define UDC_EPn_TX_IE (1 << 4) /* Transmit endpoint interrupt enabled */ -#define UDC_DS_Chg_IE (1 << 3) /* Device state changed interrupt enabled */ -#define UDC_EP0_IE (1 << 0) /* EP0 transaction interrupt enabled */ - -/* IRQ_SRC register fields */ -#define UDC_TXn_Done (1 << 10) /* Transmit DMA channel n done */ -#define UDC_RXn_Cnt (1 << 9) /* Receive DMA channel n transactions count */ -#define UDC_RXn_EOT (1 << 8) /* Receive DMA channel n end of transfer */ -#define UDC_SOF_Flg (1 << 7) /* Start-of-frame interrupt flag */ -#define UDC_EPn_RX (1 << 5) /* Endpoint n OUT transaction */ -#define UDC_EPn_TX (1 << 4) /* Endpoint n IN transaction */ -#define UDC_DS_Chg (1 << 3) /* Device state changed */ -#define UDC_Setup (1 << 2) /* Setup transaction */ -#define UDC_EP0_RX (1 << 1) /* EP0 OUT transaction */ -#define UDC_EP0_TX (1 << 0) /* EP0 IN transaction */ - -/* DEVSTAT register fields, 14.2.9 */ -#define UDC_R_WK_OK (1 << 6) /* Remote wakeup granted */ -#define UDC_USB_Reset (1 << 5) /* USB reset signalling is active */ -#define UDC_SUS (1 << 4) /* Suspended state */ -#define UDC_CFG (1 << 3) /* Configured state */ -#define UDC_ADD (1 << 2) /* Addressed state */ -#define UDC_DEF (1 << 1) /* Default state */ -#define UDC_ATT (1 << 0) /* Attached state */ - -/* SYSCON1 register fields */ -#define UDC_Cfg_Lock (1 << 8) /* Device configuration locked */ -#define UDC_Nak_En (1 << 4) /* NAK enable */ -#define UDC_Self_Pwr (1 << 2) /* Device is self-powered */ -#define UDC_Soff_Dis (1 << 1) /* Shutoff disabled */ -#define UDC_Pullup_En (1 << 0) /* External pullup enabled */ - -/* SYSCON2 register fields */ -#define UDC_Rmt_Wkp (1 << 6) /* Remote wakeup */ -#define UDC_Stall_Cmd (1 << 5) /* Stall endpoint */ -#define UDC_Dev_Cfg (1 << 3) /* Device configured */ -#define UDC_Clr_Cfg (1 << 2) /* Clear configured */ - -/* - * Select and enable endpoints - */ - -/* Table 13-1. USB Function Module Registers (endpoint configuration) */ -#define UDC_EPBASE UDC_OFFSET(0x80) /* Endpoints base address */ -#define UDC_EP0 UDC_EPBASE /* Control endpoint configuration */ -#define UDC_EP_RX_BASE UDC_OFFSET(0x84) /* Receive endpoints base address */ -#define UDC_EP_RX(endpoint) (UDC_EP_RX_BASE + ((endpoint) - 1) * 4) -#define UDC_EP_TX_BASE UDC_OFFSET(0xC4) /* Transmit endpoints base address */ -#define UDC_EP_TX(endpoint) (UDC_EP_TX_BASE + ((endpoint) - 1) * 4) - -/* EP_NUM register fields */ -#define UDC_Setup_Sel (1 << 6) /* Setup FIFO select */ -#define UDC_EP_Sel (1 << 5) /* TX/RX FIFO select */ -#define UDC_EP_Dir (1 << 4) /* Endpoint direction */ - -/* CTRL register fields */ -#define UDC_Clr_Halt (1 << 7) /* Clear halt endpoint */ -#define UDC_Set_Halt (1 << 6) /* Set halt endpoint */ -#define UDC_Set_FIFO_En (1 << 2) /* Set FIFO enable */ -#define UDC_Clr_EP (1 << 1) /* Clear endpoint */ -#define UDC_Reset_EP (1 << 0) /* Reset endpoint */ - -/* STAT_FLG register fields */ -#define UDC_Miss_In (1 << 14) -#define UDC_Data_Flush (1 << 13) -#define UDC_ISO_Err (1 << 12) -#define UDC_ISO_FIFO_Empty (1 << 9) -#define UDC_ISO_FIFO_Full (1 << 8) -#define UDC_EP_Halted (1 << 6) -#define UDC_STALL (1 << 5) -#define UDC_NAK (1 << 4) -#define UDC_ACK (1 << 3) -#define UDC_FIFO_En (1 << 2) -#define UDC_Non_ISO_FIFO_Empty (1 << 1) -#define UDC_Non_ISO_FIFO_Full (1 << 0) - -/* EPn_RX register fields */ -#define UDC_EPn_RX_Valid (1 << 15) /* valid */ -#define UDC_EPn_RX_Db (1 << 14) /* double-buffer */ -#define UDC_EPn_RX_Iso (1 << 11) /* isochronous */ - -/* EPn_TX register fields */ -#define UDC_EPn_TX_Valid (1 << 15) /* valid */ -#define UDC_EPn_TX_Db (1 << 14) /* double-buffer */ -#define UDC_EPn_TX_Iso (1 << 11) /* isochronous */ - -#define EP0_PACKETSIZE 0x40 - -/* physical to logical endpoint mapping - * Physical endpoints are an index into device->bus->endpoint_array. - * Logical endpoints are endpoints 0 to 15 IN and OUT as defined in - * the USB specification. - * - * physical ep logical ep direction endpoint_address - * 0 0 IN and OUT 0x00 - * 1 to 15 1 to 15 OUT 0x01 to 0x0f - * 16 to 30 1 to 15 IN 0x81 to 0x8f - */ -#define PHYS_EP_TO_EP_ADDR(ep) (((ep) < 16) ? (ep) : (((ep) - 15) | 0x80)) -#define EP_ADDR_TO_PHYS_EP(a) (((a) & 0x80) ? (((a) & ~0x80) + 15) : (a)) - -/* MOD_CONF_CTRL_0 bits (FIXME: move to board hardware.h ?) */ -#define CONF_MOD_USB_W2FC_VBUS_MODE_R (1 << 17) - -/* Other registers (may be) related to USB */ - -#define CLOCK_CTRL (0xFFFE0830) -#define APLL_CTRL (0xFFFE084C) -#define DPLL_CTRL (0xFFFE083C) -#define SOFT_REQ (0xFFFE0834) -#define STATUS_REQ (0xFFFE0840) - -/* FUNC_MUX_CTRL_0 bits related to USB */ -#define UDC_VBUS_CTRL (1 << 19) -#define UDC_VBUS_MODE (1 << 18) - -/* OMAP Endpoint parameters */ -#define UDC_OUT_PACKET_SIZE 64 -#define UDC_IN_PACKET_SIZE 64 -#define UDC_INT_PACKET_SIZE 16 -#define UDC_BULK_PACKET_SIZE 16 - -#define UDC_INT_ENDPOINT 5 -#define UDC_OUT_ENDPOINT 2 -#define UDC_IN_ENDPOINT 1 - -#endif -- cgit v1.2.1