From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- include/configs/p3mx.h | 238 ++++++++++++++++++++++++------------------------- 1 file changed, 119 insertions(+), 119 deletions(-) (limited to 'include/configs/p3mx.h') diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 2df1d9d34b..5e4d30b8a5 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -43,21 +43,21 @@ #if defined (CONFIG_P3M750) #define CONFIG_750FX /* 750GL/GX/FX */ #define CONFIG_HIGH_BATS /* High BATs supported */ -#define CFG_BOARD_NAME "P3M750" -#define CFG_BUS_HZ 100000000 -#define CFG_BUS_CLK CFG_BUS_HZ -#define CFG_TCLK 100000000 +#define CONFIG_SYS_BOARD_NAME "P3M750" +#define CONFIG_SYS_BUS_HZ 100000000 +#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ +#define CONFIG_SYS_TCLK 100000000 #elif defined (CONFIG_P3M7448) #define CONFIG_74xx -#define CFG_BOARD_NAME "P3M7448" -#define CFG_BUS_HZ 133333333 -#define CFG_BUS_CLK CFG_BUS_HZ -#define CFG_TCLK 133333333 +#define CONFIG_SYS_BOARD_NAME "P3M7448" +#define CONFIG_SYS_BUS_HZ 133333333 +#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ +#define CONFIG_SYS_TCLK 133333333 #endif -#define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */ +#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */ /* which initialization functions to call for this board */ -#define CFG_BOARD_ASM_INIT 1 +#define CONFIG_SYS_BOARD_ASM_INIT 1 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ @@ -66,42 +66,42 @@ * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ -#define CFG_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 #ifdef CONFIG_P3M750 -#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ +#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */ #endif -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #if defined (CONFIG_P3M750) -#define CFG_FLASH_BASE 0xff800000 /* start of flash banks */ -#define CFG_BOOT_SIZE _8M /* boot flash */ +#define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of flash banks */ +#define CONFIG_SYS_BOOT_SIZE _8M /* boot flash */ #elif defined (CONFIG_P3M7448) -#define CFG_FLASH_BASE 0xff000000 /* start of flash banks */ -#define CFG_BOOT_SIZE _16M /* boot flash */ +#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of flash banks */ +#define CONFIG_SYS_BOOT_SIZE _16M /* boot flash */ #endif -#define CFG_BOOT_SPACE CFG_FLASH_BASE /* BOOT_CS0 flash 0 */ -#define CFG_MONITOR_BASE 0xfff00000 -#define CFG_RESET_ADDRESS 0xfff00100 -#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ -#define CFG_MISC_REGION_BASE 0xf0000000 +#define CONFIG_SYS_BOOT_SPACE CONFIG_SYS_FLASH_BASE /* BOOT_CS0 flash 0 */ +#define CONFIG_SYS_MONITOR_BASE 0xfff00000 +#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 +#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ +#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 -#define CFG_DFL_GT_REGS 0xf1000000 /* boot time GT_REGS */ -#define CFG_GT_REGS 0xf1000000 /* GT Registers are mapped here */ -#define CFG_INT_SRAM_BASE 0x42000000 /* GT offers 256k internal SRAM */ +#define CONFIG_SYS_DFL_GT_REGS 0xf1000000 /* boot time GT_REGS */ +#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers are mapped here */ +#define CONFIG_SYS_INT_SRAM_BASE 0x42000000 /* GT offers 256k internal SRAM */ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in internal SRAM) *----------------------------------------------------------------------*/ /* - * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS + * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS * To an unused memory region. The stack will remain in cache until RAM * is initialized */ -#undef CFG_INIT_RAM_LOCK -#define CFG_INIT_RAM_ADDR 0x42000000 -#define CFG_INIT_RAM_END 0x1000 -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#undef CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0x42000000 +#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) /*----------------------------------------------------------------------- @@ -110,15 +110,15 @@ #define CONFIG_MPSC /* MV64460 Serial */ #define CONFIG_MPSC_PORT 0 #define CONFIG_BAUDRATE 115200 /* console baudrate */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /*----------------------------------------------------------------------- * Ethernet *----------------------------------------------------------------------*/ /* Change the default ethernet port, use this define (options: 0, 1, 2) */ -#define CFG_ETH_PORT ETH_0 +#define CONFIG_SYS_ETH_PORT ETH_0 #define CONFIG_NET_MULTI #define MV_ETH_DEVS 2 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ @@ -127,15 +127,15 @@ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #if defined (CONFIG_P3M750) @@ -144,7 +144,7 @@ #define CONFIG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */ #endif #define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) /*----------------------------------------------------------------------- * DDR SDRAM @@ -154,12 +154,12 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CFG_I2C_SPEED 100000 /* I2C speed default */ +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed default */ /* I2C RTC */ #define CONFIG_RTC_M41T11 1 -#define CFG_I2C_RTC_ADDR 0x68 -#define CFG_M41T11_BASE_YEAR 1900 /* play along with linux */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */ /*----------------------------------------------------------------------- * PCI stuff @@ -176,27 +176,27 @@ #endif /* CONFIG_PCI */ /* PCI MEMORY MAP section */ -#define CFG_PCI0_MEM_BASE 0x80000000 -#define CFG_PCI0_MEM_SIZE _128M -#define CFG_PCI1_MEM_BASE 0x88000000 -#define CFG_PCI1_MEM_SIZE _128M +#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI0_MEM_SIZE _128M +#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 +#define CONFIG_SYS_PCI1_MEM_SIZE _128M -#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE) -#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE) +#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) +#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) /* PCI I/O MAP section */ -#define CFG_PCI0_IO_BASE 0xfa000000 -#define CFG_PCI0_IO_SIZE _16M -#define CFG_PCI1_IO_BASE 0xfb000000 -#define CFG_PCI1_IO_SIZE _16M +#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 +#define CONFIG_SYS_PCI0_IO_SIZE _16M +#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 +#define CONFIG_SYS_PCI1_IO_SIZE _16M -#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE) -#define CFG_PCI0_IO_SPACE_PCI 0x00000000 -#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE) -#define CFG_PCI1_IO_SPACE_PCI 0x00000000 +#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) +#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000 +#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) +#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000 -#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE) -#define CFG_PCI_IDSEL 0x30 +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE) +#define CONFIG_SYS_PCI_IDSEL 0x30 #undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \ @@ -285,26 +285,26 @@ /*----------------------------------------------------------------------- * Miscellaneous configurable options *----------------------------------------------------------------------*/ -#define CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_LOAD_ADDR 0x08000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x08000000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ @@ -317,9 +317,9 @@ *----------------------------------------------------------------------*/ /* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */ #if defined (CONFIG_P3M750) -#define CFG_BOOT_PAR 0x8FDFF87F /* 16 bit flash, disable burst*/ +#define CONFIG_SYS_BOOT_PAR 0x8FDFF87F /* 16 bit flash, disable burst*/ #elif defined (CONFIG_P3M7448) -#define CFG_BOOT_PAR 0x8FEFFFFF /* 32 bit flash, burst enabled */ +#define CONFIG_SYS_BOOT_PAR 0x8FEFFFFF /* 32 bit flash, burst enabled */ #endif /* @@ -356,11 +356,11 @@ * MPP[30] Module reset GPIO OUT Board reset * MPP[31] PCI EReady GPIO IN Connected to P12 */ -#define CFG_MPP_CONTROL_0 0x00303022 -#define CFG_MPP_CONTROL_1 0x00000000 -#define CFG_MPP_CONTROL_2 0x00004000 -#define CFG_MPP_CONTROL_3 0x00000004 -#define CFG_GPP_LEVEL_CONTROL 0x280730D0 +#define CONFIG_SYS_MPP_CONTROL_0 0x00303022 +#define CONFIG_SYS_MPP_CONTROL_1 0x00000000 +#define CONFIG_SYS_MPP_CONTROL_2 0x00004000 +#define CONFIG_SYS_MPP_CONTROL_3 0x00000004 +#define CONFIG_SYS_GPP_LEVEL_CONTROL 0x280730D0 /*---------------------------------------------------------------------- * Initial BAT mappings @@ -371,75 +371,75 @@ * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT */ /* SDRAM */ -#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT) -#define CFG_DBAT0U CFG_IBAT0U +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U /* init ram */ -#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) -#define CFG_DBAT1L CFG_IBAT1L -#define CFG_DBAT1U CFG_IBAT1U +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U /* PCI0, PCI1 in one BAT */ -#define CFG_IBAT2L BATL_NO_ACCESS -#define CFG_IBAT2U CFG_DBAT2U -#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS +#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) /* GT regs, bootrom, all the devices, PCI I/O */ -#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) -#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) -#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CFG_DBAT3U CFG_IBAT3U +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) +#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CFG_IBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT4U (CFG_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT4U CFG_IBAT4U +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U /* set rest out of range for Linux !!!!!!!!!!! */ /* IBAT5 and DBAT5 */ -#define CFG_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT5U CFG_IBAT5U +#define CONFIG_SYS_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U /* IBAT6 and DBAT6 */ -#define CFG_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT6U CFG_IBAT6U +#define CONFIG_SYS_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U /* IBAT7 and DBAT7 */ -#define CFG_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT7U CFG_IBAT7U +#define CONFIG_SYS_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ -#define CFG_VXWORKS_MAC_PTR 0x42010000 /* use some memory in SRAM that's not used!!! */ +#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_VXWORKS_MAC_PTR 0x42010000 /* use some memory in SRAM that's not used!!! */ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- * L2CR setup -- make sure this is right for your board! * look in include/mpc74xx.h for the defines used here */ -#define CFG_L2 +#define CONFIG_SYS_L2 #if defined (CONFIG_750CX) || defined (CONFIG_750FX) #define L2_INIT 0 -- cgit v1.2.1