From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- include/configs/MPC8266ADS.h | 234 +++++++++++++++++++++---------------------- 1 file changed, 117 insertions(+), 117 deletions(-) (limited to 'include/configs/MPC8266ADS.h') diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 26c6fbe502..fe1cc17960 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -36,7 +36,7 @@ !! To make it work for the default, the TEXT_BASE define in !! !! board/mpc8266ads/config.mk must be changed from 0xfe000000 to !! !! 0xfff00000 !! - !! The CFG_HRCW_MASTER define below must also be changed to match !! + !! The CONFIG_SYS_HRCW_MASTER define below must also be changed to match !! !! !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */ @@ -115,18 +115,18 @@ * - Select bus for bd/buffers (see 28-13) * - Half duplex */ -# define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) -# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) -# define CFG_CPMFCR_RAMTYPE 0 -# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) +# define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) +# define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) +# define CONFIG_SYS_CPMFCR_RAMTYPE 0 +# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) #endif /* CONFIG_ETHER_INDEX */ /* other options */ #define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* PCI */ #define CONFIG_PCI @@ -218,47 +218,47 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */ /* for versions < 2.4.5-pre5 */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#define CFG_FLASH_BASE 0xFE000000 +#define CONFIG_SYS_FLASH_BASE 0xFE000000 #define FLASH_BASE 0xFE000000 -#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ -#define CFG_FLASH_SIZE 8 -#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max num of sects on one chip */ +#define CONFIG_SYS_FLASH_SIZE 8 +#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */ -#undef CFG_FLASH_CHECKSUM +#undef CONFIG_SYS_FLASH_CHECKSUM /* this is stuff came out of the Motorola docs */ /* Only change this if you also change the Hardware configuration Word */ -#define CFG_DEFAULT_IMMR 0x0F010000 +#define CONFIG_SYS_DEFAULT_IMMR 0x0F010000 /* Set IMMR to 0xF0000000 or above to boot Linux */ -#define CFG_IMMR 0xF0000000 -#define CFG_BCSR 0xF8000000 -#define CFG_PCI_INT 0xF8200000 /* PCI interrupt controller */ +#define CONFIG_SYS_IMMR 0xF0000000 +#define CONFIG_SYS_BCSR 0xF8000000 +#define CONFIG_SYS_PCI_INT 0xF8200000 /* PCI interrupt controller */ /* Define CONFIG_VERY_BIG_RAM to allow use of SDRAMs larger than 256MBytes */ @@ -267,8 +267,8 @@ /* What should be the base address of SDRAM DIMM and how big is * it (in Mbytes)? This will normally auto-configure via the SPD. */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 16 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_SIZE 16 #define SDRAM_SPD_ADDR 0x50 @@ -295,12 +295,12 @@ * - No data pipelining is done * - Valid */ -#define CFG_BR2_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) |\ +#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ BRx_PS_64 |\ BRx_MS_SDRAM_P |\ BRx_V) -#define CFG_BR3_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) |\ +#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ BRx_PS_64 |\ BRx_MS_SDRAM_P |\ BRx_V) @@ -314,13 +314,13 @@ * - Back-to-back page mode * - Internal bank interleaving within save device enabled */ -#if (CFG_SDRAM_SIZE == 64) -#define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM_SIZE) |\ +#if (CONFIG_SYS_SDRAM_SIZE == 64) +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM_SIZE) |\ ORxS_BPD_4 |\ ORxS_ROWST_PBI0_A8 |\ ORxS_NUMR_12) -#elif (CFG_SDRAM_SIZE == 16) -#define CFG_OR2_PRELIM (0xFF000C80) +#elif (CONFIG_SYS_SDRAM_SIZE == 16) +#define CONFIG_SYS_OR2_PRELIM (0xFF000C80) #else #error "INVALID SDRAM CONFIGURATION" #endif @@ -331,7 +331,7 @@ *----------------------------------------------------------------------- */ -#if (CFG_SDRAM_SIZE == 64) +#if (CONFIG_SYS_SDRAM_SIZE == 64) /* With a 64 MB DIMM, the PSDMR is configured as follows: * * - Bank Based Interleaving, @@ -349,7 +349,7 @@ * - earliest timing for PRECHARGE after last data was written is 1 clock, * - CAS Latency is 2. */ -#define CFG_PSDMR (PSDMR_RFEN |\ +#define CONFIG_SYS_PSDMR (PSDMR_RFEN |\ PSDMR_SDAM_A14_IS_A5 |\ PSDMR_BSMA_A14_A16 |\ PSDMR_SDA10_PBI0_A9 |\ @@ -359,12 +359,12 @@ PSDMR_LDOTOPRE_1C |\ PSDMR_WRC_1C |\ PSDMR_CL_2) -#elif (CFG_SDRAM_SIZE == 16) +#elif (CONFIG_SYS_SDRAM_SIZE == 16) /* With a 16 MB DIMM, the PSDMR is configured as follows: * * configuration parameters found in Motorola documentation */ -#define CFG_PSDMR (0x016EB452) +#define CONFIG_SYS_PSDMR (0x016EB452) #else #error "INVALID SDRAM CONFIGURATION" #endif @@ -374,22 +374,22 @@ #define FETHIEN 0x08000008 #define FETH_RST 0x04000004 -#define CFG_INIT_RAM_ADDR CFG_IMMR -#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2) */ /* 0x0EB2B645 */ -#define CFG_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP ) |\ +#define CONFIG_SYS_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP ) |\ ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB010 ) |\ ( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 ) |\ ( HRCW_CS10PC01 | HRCW_MODCK_H0101 ) \ ) /* Use this HRCW for booting from address 0xfff0000 (JP3 in setting 2-3) */ -/* #define CFG_HRCW_MASTER 0x0cb23645 */ +/* #define CONFIG_SYS_HRCW_MASTER 0x0cb23645 */ /* This value should actually be situated in the first 256 bytes of the FLASH which on the standard MPC8266ADS board is at address 0xFF800000 @@ -406,39 +406,39 @@ */ /* no slaves */ -#define CFG_HRCW_SLAVE1 0 -#define CFG_HRCW_SLAVE2 0 -#define CFG_HRCW_SLAVE3 0 -#define CFG_HRCW_SLAVE4 0 -#define CFG_HRCW_SLAVE5 0 -#define CFG_HRCW_SLAVE6 0 -#define CFG_HRCW_SLAVE7 0 +#define CONFIG_SYS_HRCW_SLAVE1 0 +#define CONFIG_SYS_HRCW_SLAVE2 0 +#define CONFIG_SYS_HRCW_SLAVE3 0 +#define CONFIG_SYS_HRCW_SLAVE4 0 +#define CONFIG_SYS_HRCW_SLAVE5 0 +#define CONFIG_SYS_HRCW_SLAVE6 0 +#define CONFIG_SYS_HRCW_SLAVE7 0 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_MONITOR_BASE TEXT_BASE -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) -# define CFG_RAMBOOT +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT #endif -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#ifndef CFG_RAMBOOT +#ifndef CONFIG_SYS_RAMBOOT # define CONFIG_ENV_IS_IN_FLASH 1 -# define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) +# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) # define CONFIG_ENV_SECT_SIZE 0x40000 #else # define CONFIG_ENV_IS_IN_NVRAM 1 -# define CONFIG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) +# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) # define CONFIG_ENV_SIZE 0x200 -#endif /* CFG_RAMBOOT */ +#endif /* CONFIG_SYS_RAMBOOT */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ #if defined(CONFIG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- @@ -451,22 +451,22 @@ * * HID1 has only read-only information - nothing to set. */ -/*#define CFG_HID0_INIT 0 */ -#define CFG_HID0_INIT (HID0_ICE |\ +/*#define CONFIG_SYS_HID0_INIT 0 */ +#define CONFIG_SYS_HID0_INIT (HID0_ICE |\ HID0_DCE |\ HID0_ICFI |\ HID0_DCI |\ HID0_IFEM |\ HID0_ABE) -#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE ) +#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE ) -#define CFG_HID2 0 +#define CONFIG_SYS_HID2 0 -#define CFG_SYPCR 0xFFFFFFC3 -#define CFG_BCR 0x004C0000 -#define CFG_SIUMCR 0x4E64C000 -#define CFG_SCCR 0x00000000 +#define CONFIG_SYS_SYPCR 0xFFFFFFC3 +#define CONFIG_SYS_BCR 0x004C0000 +#define CONFIG_SYS_SIUMCR 0x4E64C000 +#define CONFIG_SYS_SCCR 0x00000000 /* local bus memory map * @@ -481,31 +481,31 @@ * 0xF8300000-0xF8307FFF 32KB EEPROM * 0xFE000000-0xFFFFFFFF 32MB flash */ -#define CFG_BR0_PRELIM 0xFE001801 /* flash */ -#define CFG_OR0_PRELIM 0xFE000836 -#define CFG_BR1_PRELIM (CFG_BCSR | 0x1801) /* BCSR */ -#define CFG_OR1_PRELIM 0xFFFF8010 -#define CFG_BR4_PRELIM 0xF8300801 /* EEPROM */ -#define CFG_OR4_PRELIM 0xFFFF8846 -#define CFG_BR5_PRELIM 0xF8100801 /* PM5350 ATM UNI */ -#define CFG_OR5_PRELIM 0xFFFF8E36 -#define CFG_BR8_PRELIM (CFG_PCI_INT | 0x1801) /* PCI interrupt controller */ -#define CFG_OR8_PRELIM 0xFFFF8010 - -#define CFG_RMR 0x0001 -#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) -#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) -#define CFG_RCCR 0 -#define CFG_MPTPR 0x00001900 -#define CFG_PSRT 0x00000021 +#define CONFIG_SYS_BR0_PRELIM 0xFE001801 /* flash */ +#define CONFIG_SYS_OR0_PRELIM 0xFE000836 +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR | 0x1801) /* BCSR */ +#define CONFIG_SYS_OR1_PRELIM 0xFFFF8010 +#define CONFIG_SYS_BR4_PRELIM 0xF8300801 /* EEPROM */ +#define CONFIG_SYS_OR4_PRELIM 0xFFFF8846 +#define CONFIG_SYS_BR5_PRELIM 0xF8100801 /* PM5350 ATM UNI */ +#define CONFIG_SYS_OR5_PRELIM 0xFFFF8E36 +#define CONFIG_SYS_BR8_PRELIM (CONFIG_SYS_PCI_INT | 0x1801) /* PCI interrupt controller */ +#define CONFIG_SYS_OR8_PRELIM 0xFFFF8010 + +#define CONFIG_SYS_RMR 0x0001 +#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) +#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) +#define CONFIG_SYS_RCCR 0 +#define CONFIG_SYS_MPTPR 0x00001900 +#define CONFIG_SYS_PSRT 0x00000021 /* This address must not exist */ -#define CFG_RESET_ADDRESS 0xFCFFFF00 +#define CONFIG_SYS_RESET_ADDRESS 0xFCFFFF00 /* PCI Memory map (if different from default map */ -#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */ -#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ -#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ +#define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */ +#define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +#define CONFIG_SYS_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ PICMR_PREFETCH_EN) /* @@ -516,11 +516,11 @@ */ /* PCIBR0 */ -#define CFG_PCI_MSTR0_LOCAL 0x80000000 /* Local base */ -#define CFG_PCIMSK0_MASK PCIMSK_1GB /* Size of window */ +#define CONFIG_SYS_PCI_MSTR0_LOCAL 0x80000000 /* Local base */ +#define CONFIG_SYS_PCIMSK0_MASK PCIMSK_1GB /* Size of window */ /* PCIBR1 */ -#define CFG_PCI_MSTR1_LOCAL 0xF4000000 /* Local base */ -#define CFG_PCIMSK1_MASK PCIMSK_64MB /* Size of window */ +#define CONFIG_SYS_PCI_MSTR1_LOCAL 0xF4000000 /* Local base */ +#define CONFIG_SYS_PCIMSK1_MASK PCIMSK_64MB /* Size of window */ /* * Master window that allows the CPU to access PCI Memory (prefetch). @@ -528,11 +528,11 @@ * in the bridge. */ -#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL -#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ -#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN) +#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ +#define CONFIG_SYS_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ +#define CONFIG_SYS_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL +#define CONFIG_SYS_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define CONFIG_SYS_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN) /* * Master window that allows the CPU to access PCI Memory (non-prefetch). @@ -540,11 +540,11 @@ * in the bridge. */ -#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ -#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ -#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL -#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ -#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) +#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ +#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ +#define CONFIG_SYS_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL +#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#define CONFIG_SYS_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) /* * Master window that allows the CPU to access PCI IO space. @@ -552,11 +552,11 @@ * in the bridge. */ -#define CFG_PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ -#define CFG_PCI_MSTR_IO_BUS 0xF4000000 /* PCI base */ -#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL -#define CFG_PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ -#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO) +#define CONFIG_SYS_PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ +#define CONFIG_SYS_PCI_MSTR_IO_BUS 0xF4000000 /* PCI base */ +#define CONFIG_SYS_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL +#define CONFIG_SYS_PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ +#define CONFIG_SYS_POCMR2_MASK_ATTRIB (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO) /* * JFFS2 partitions -- cgit v1.2.1