From 6dd652fa4d8591a32e2707a91f4582ed13011b17 Mon Sep 17 00:00:00 2001 From: wdenk Date: Thu, 19 Jun 2003 23:40:20 +0000 Subject: Patches by Murray Jensen, 17 Jun 2003: - Hymod board database mods: add "who" field and new xilinx chip types - provide new "init_cmd_timeout()" function so code external to "common/main.c" can use the "reset_cmd_timeout()" function before entering the main loop - add DTT support for adm1021 (new file dtt/adm1021.c; config slightly different. see include/configs/hymod.h for an example (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and CFG_DTT_ADM1021 defined) - add new "eeprom_probe()" function which has similar args and behaves in a similar way to "eeprom_read()" etc. - add 8260 FCC ethernet loopback code (new "eth_loopback_test()" function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST) - gdbtools copyright update - ensure that set_msr() executes the "sync" and "isync" instructions after the "mtmsr" instruction in cpu/mpc8260/interrupts.c - 8260 I/O ports fix: Open Drain should be set last when configuring - add SIU IRQ defines for 8260 - allow LDSCRIPT override and OBJCFLAGS initialization: change to config.mk to allow board configurations to override the GNU linker script, selected via the LDSCRIPT, make variable, and to give an initial value to the OBJCFLAGS make variable - 8260 i2c enhancement: o correctly extends the timeout depending on the size of all queued messages for both transmit and receive o will not continue with receive if transmit times out o ensures that the error callback is done for all queued tx and rx messages o correctly detects both tx and rx timeouts, only delivers one to the callback, and does not overwrite an earlier error o logic in i2c_probe now correct - add "vprintf()" function so that "panic()" function can be technically correct - many Hymod board changes --- dtt/Makefile | 2 +- dtt/adm1021.c | 171 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 172 insertions(+), 1 deletion(-) create mode 100644 dtt/adm1021.c (limited to 'dtt') diff --git a/dtt/Makefile b/dtt/Makefile index 48a4be6667..6b9d49949a 100644 --- a/dtt/Makefile +++ b/dtt/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = libdtt.a -OBJS = lm75.o ds1621.o +OBJS = lm75.o ds1621.o adm1021.o all: $(LIB) diff --git a/dtt/adm1021.c b/dtt/adm1021.c new file mode 100644 index 0000000000..14c38f0a83 --- /dev/null +++ b/dtt/adm1021.c @@ -0,0 +1,171 @@ +/* + * (C) Copyright 2003 + * Murray Jensen, CSIRO-MIT, Murray.Jensen@csiro.au + * + * based on dtt/lm75.c which is ... + * + * (C) Copyright 2001 + * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Analog Devices's ADM1021 + * "Low Cost Microprocessor System Temperature Monitor" + */ + +#include + +#ifdef CONFIG_DTT_ADM1021 + +#include +#include + +typedef + struct { + uint i2c_addr:7; /* 7bit i2c chip address */ + uint conv_rate:3; /* conversion rate */ + uint enable_alert:1; /* enable alert output pin */ + uint enable_local:1; /* enable internal temp sensor */ + uint max_local:8; /* internal temp maximum */ + uint min_local:8; /* internal temp minimum */ + uint enable_remote:1; /* enable remote temp sensor */ + uint max_remote:8; /* remote temp maximum */ + uint min_remote:8; /* remote temp minimum */ + } +dtt_cfg_t; + +dtt_cfg_t dttcfg[] = CFG_DTT_ADM1021; + +int +dtt_read (int sensor, int reg) +{ + dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; + uchar data; + + if (i2c_read(dcp->i2c_addr, reg, 1, &data, 1) != 0) + return -1; + + return (int)data; +} /* dtt_read() */ + +int +dtt_write (int sensor, int reg, int val) +{ + dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; + uchar data; + + data = (uchar)(val & 0xff); + + if (i2c_write(dcp->i2c_addr, reg, 1, &data, 1) != 0) + return 1; + + return 0; +} /* dtt_write() */ + +static int +_dtt_init (int sensor) +{ + dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; + int reg, val; + + if (((sensor & 1) == 0 ? dcp->enable_local : dcp->enable_remote) == 0) + return 1; /* sensor is disabled (or rather ignored) */ + + /* + * Setup High Limit register + */ + if ((sensor & 1) == 0) { + reg = DTT_WRITE_LOC_HIGHLIM; + val = dcp->max_local; + } + else { + reg = DTT_WRITE_REM_HIGHLIM; + val = dcp->max_remote; + } + if (dtt_write (sensor, reg, val) != 0) + return 1; + + /* + * Setup Low Limit register + */ + if ((sensor & 1) == 0) { + reg = DTT_WRITE_LOC_LOWLIM; + val = dcp->min_local; + } + else { + reg = DTT_WRITE_REM_LOWLIM; + val = dcp->min_remote; + } + if (dtt_write (sensor, reg, val) != 0) + return 1; + + /* shouldn't hurt if the rest gets done twice */ + + /* + * Setup Conversion Rate register + */ + if (dtt_write (sensor, DTT_WRITE_CONVRATE, dcp->conv_rate) != 0) + return 1; + + /* + * Setup configuraton register + */ + val = 0; /* running */ + if (dcp->enable_alert == 0) + val |= DTT_CONFIG_ALERT_MASKED; /* mask ALERT pin */ + if (dtt_write (sensor, DTT_WRITE_CONFIG, val) != 0) + return 1; + + return 0; +} /* _dtt_init() */ + +int +dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + const char *const header = "DTT: "; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf ("%s%d FAILED INIT\n", header, i+1); + else + printf ("%s%d is %i C\n", header, i+1, + dtt_get_temp(sensors[i])); + } + + return (0); +} /* dtt_init() */ + +int +dtt_get_temp (int sensor) +{ + signed char val; + + if ((sensor & 1) == 0) + val = dtt_read(sensor, DTT_READ_LOC_VALUE); + else + val = dtt_read(sensor, DTT_READ_REM_VALUE); + + return (int) val; +} /* dtt_get_temp() */ + +#endif /* CONFIG_DTT_ADM1021 */ -- cgit v1.2.1