From 6dd3b566893a99629771e076dca1ce8db7b77dc1 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 28 Mar 2014 12:03:36 -0400 Subject: mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem in SPL This mainly converts the am335x_spl_bch driver to the "normal" format which means a slight change to nand_info within the driver. Acked-by: Scott Wood Signed-off-by: Tom Rini --- drivers/mtd/nand/am335x_spl_bch.c | 54 +++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c index c84851bab5..bd89b067d5 100644 --- a/drivers/mtd/nand/am335x_spl_bch.c +++ b/drivers/mtd/nand/am335x_spl_bch.c @@ -16,7 +16,7 @@ #include static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS; -static nand_info_t mtd; +nand_info_t nand_info[1]; static struct nand_chip nand_chip; #define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ @@ -30,12 +30,12 @@ static struct nand_chip nand_chip; static int nand_command(int block, int page, uint32_t offs, u8 cmd) { - struct nand_chip *this = mtd.priv; + struct nand_chip *this = nand_info[0].priv; int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; void (*hwctrl)(struct mtd_info *mtd, int cmd, unsigned int ctrl) = this->cmd_ctrl; - while (!this->dev_ready(&mtd)) + while (!this->dev_ready(&nand_info[0])) ; /* Emulate NAND_CMD_READOOB */ @@ -45,11 +45,11 @@ static int nand_command(int block, int page, uint32_t offs, } /* Begin command latch cycle */ - hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); + hwctrl(&nand_info[0], cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); if (cmd == NAND_CMD_RESET) { - hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - while (!this->dev_ready(&mtd)) + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + while (!this->dev_ready(&nand_info[0])) ; return 0; } @@ -60,35 +60,35 @@ static int nand_command(int block, int page, uint32_t offs, /* Set ALE and clear CLE to start address cycle */ /* Column address */ - hwctrl(&mtd, offs & 0xff, + hwctrl(&nand_info[0], offs & 0xff, NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ - hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ + hwctrl(&nand_info[0], (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ /* Row address */ - hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ - hwctrl(&mtd, ((page_addr >> 8) & 0xff), + hwctrl(&nand_info[0], (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ + hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff), NAND_CTRL_ALE); /* A[27:20] */ #ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE /* One more address cycle for devices > 128MiB */ - hwctrl(&mtd, (page_addr >> 16) & 0x0f, + hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f, NAND_CTRL_ALE); /* A[31:28] */ #endif - hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); if (cmd == NAND_CMD_READ0) { /* Latch in address */ - hwctrl(&mtd, NAND_CMD_READSTART, + hwctrl(&nand_info[0], NAND_CMD_READSTART, NAND_CTRL_CLE | NAND_CTRL_CHANGE); - hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * Wait a while for the data to be ready */ - while (!this->dev_ready(&mtd)) + while (!this->dev_ready(&nand_info[0])) ; } else if (cmd == NAND_CMD_RNDOUT) { - hwctrl(&mtd, NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE | + hwctrl(&nand_info[0], NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE | NAND_CTRL_CHANGE); - hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); } return 0; @@ -96,7 +96,7 @@ static int nand_command(int block, int page, uint32_t offs, static int nand_is_bad_block(int block) { - struct nand_chip *this = mtd.priv; + struct nand_chip *this = nand_info[0].priv; nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB); @@ -117,7 +117,7 @@ static int nand_is_bad_block(int block) static int nand_read_page(int block, int page, void *dst) { - struct nand_chip *this = mtd.priv; + struct nand_chip *this = nand_info[0].priv; u_char ecc_calc[ECCTOTAL]; u_char ecc_code[ECCTOTAL]; u_char oob_data[CONFIG_SYS_NAND_OOBSIZE]; @@ -133,15 +133,15 @@ static int nand_read_page(int block, int page, void *dst) nand_command(block, page, 0, NAND_CMD_READ0); for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - this->ecc.hwctl(&mtd, NAND_ECC_READ); + this->ecc.hwctl(&nand_info[0], NAND_ECC_READ); nand_command(block, page, data_pos, NAND_CMD_RNDOUT); - this->read_buf(&mtd, p, eccsize); + this->read_buf(&nand_info[0], p, eccsize); nand_command(block, page, oob_pos, NAND_CMD_RNDOUT); - this->read_buf(&mtd, oob, eccbytes); - this->ecc.calculate(&mtd, p, &ecc_calc[i]); + this->read_buf(&nand_info[0], oob, eccbytes); + this->ecc.calculate(&nand_info[0], p, &ecc_calc[i]); data_pos += eccsize; oob_pos += eccbytes; @@ -160,7 +160,7 @@ static int nand_read_page(int block, int page, void *dst) * from correct_data(). We just hope that all possible errors * are corrected by this routine. */ - this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]); + this->ecc.correct(&nand_info[0], p, &ecc_code[i], &ecc_calc[i]); } return 0; @@ -206,13 +206,13 @@ void nand_init(void) /* * Init board specific nand support */ - mtd.priv = &nand_chip; + nand_info[0].priv = &nand_chip; nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE; board_nand_init(&nand_chip); if (nand_chip.select_chip) - nand_chip.select_chip(&mtd, 0); + nand_chip.select_chip(&nand_info[0], 0); /* NAND chip may require reset after power-on */ nand_command(0, 0, 0, NAND_CMD_RESET); @@ -222,5 +222,5 @@ void nand_init(void) void nand_deselect(void) { if (nand_chip.select_chip) - nand_chip.select_chip(&mtd, -1); + nand_chip.select_chip(&nand_info[0], -1); } -- cgit v1.2.1