From 90cdc1039d0bf6d85bb497dbb93d317ad234e846 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 11 Jan 2015 20:34:51 +0100 Subject: musb-new: Fix reset sequence when in host mode This commit fixes a number of issues with the reset sequence of musb-new in host mode: 1) Our usb device probe relies on a second device reset being done after the first descriptors read. Factor the musb reset code into a usb_reset_root_port function (and add this as an empty define for other controllers), and call this when a device has no parent. 2) Just like with normal usb controllers there needs to be a delay after reset, for normal usb controllers, this is handled in hub_port_reset, add a delay to usb_reset_root_port. 3) Sync the musb reset sequence with the upstream kernel, clear all bits of power except bits 4-7, and increase the time reset is asserted to 50 ms. With these fixes an usb keyboard I have now always enumerates properly, where as earlier it would only enumerare properly once every 5 tries. Signed-off-by: Hans de Goede --- drivers/usb/musb-new/musb_uboot.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) (limited to 'drivers/usb/musb-new') diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c index 28500bf157..dab6f9b213 100644 --- a/drivers/usb/musb-new/musb_uboot.c +++ b/drivers/usb/musb-new/musb_uboot.c @@ -110,9 +110,27 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe, return submit_urb(&hcd, urb); } -int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) +void usb_reset_root_port(void) { + void *mbase = host->mregs; u8 power; + + power = musb_readb(mbase, MUSB_POWER); + power &= 0xf0; + musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power); + mdelay(50); + power = musb_readb(mbase, MUSB_POWER); + musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power); + host->isr(0, host); + host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ? + USB_SPEED_HIGH : + (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_FSDEV) ? + USB_SPEED_FULL : USB_SPEED_LOW; + mdelay((host_speed == USB_SPEED_LOW) ? 200 : 50); +} + +int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) +{ void *mbase; /* USB spec says it may take up to 1 second for a device to connect */ unsigned long timeout = get_timer(0) + 1000; @@ -131,16 +149,7 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) if (get_timer(0) >= timeout) return -ENODEV; - power = musb_readb(mbase, MUSB_POWER); - musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power); - udelay(30000); - power = musb_readb(mbase, MUSB_POWER); - musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power); - host->isr(0, host); - host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ? - USB_SPEED_HIGH : - (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_FSDEV) ? - USB_SPEED_FULL : USB_SPEED_LOW; + usb_reset_root_port(); host->is_active = 1; hcd.hcd_priv = host; -- cgit v1.2.1