From f3e85e4825e02fbd21859c35881f639a2c3e7afd Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Sat, 8 Nov 2014 20:55:46 +0100 Subject: twl4030: device-index-specific MMC power initializations, common ramp-up delay Not every device has multiple MMC slots available, so it makes sense to enable only the required LDOs for the available slots. Generic code in omap_hsmmc will enable both VMMC1 and VMMC2, in doubt. Signed-off-by: Paul Kocialkowski Reviewed-by: Tom Rini --- drivers/power/twl4030.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) (limited to 'drivers/power') diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index e578ae6342..7f1fdd1534 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -91,17 +91,23 @@ void twl4030_power_init(void) TWL4030_PM_RECEIVER_DEV_GRP_P1); } -void twl4030_power_mmc_init(void) +void twl4030_power_mmc_init(int dev_index) { - /* Set VMMC1 to 3.15 Volts */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED, - TWL4030_PM_RECEIVER_VMMC1_VSEL_32, - TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); + if (dev_index == 0) { + /* Set VMMC1 to 3.15 Volts */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED, + TWL4030_PM_RECEIVER_VMMC1_VSEL_32, + TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); - /* Set VMMC2 to 3.15 Volts */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, - TWL4030_PM_RECEIVER_VMMC2_VSEL_32, - TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); + mdelay(100); /* ramp-up delay from Linux code */ + } else if (dev_index == 1) { + /* Set VMMC2 to 3.15 Volts */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, + TWL4030_PM_RECEIVER_VMMC2_VSEL_32, + TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + + mdelay(100); /* ramp-up delay from Linux code */ + } } -- cgit v1.2.1