From 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 20 Nov 2007 20:28:09 +0100 Subject: drivers/pci : move pci drivers to drivers/pci Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/pci/Makefile | 51 +++++ drivers/pci/fsl_pci_init.c | 177 +++++++++++++++ drivers/pci/pci.c | 526 +++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci_auto.c | 412 +++++++++++++++++++++++++++++++++++ drivers/pci/pci_indirect.c | 138 ++++++++++++ drivers/pci/tsi108_pci.c | 181 ++++++++++++++++ drivers/pci/w83c553f.c | 226 +++++++++++++++++++ 7 files changed, 1711 insertions(+) create mode 100644 drivers/pci/Makefile create mode 100644 drivers/pci/fsl_pci_init.c create mode 100644 drivers/pci/pci.c create mode 100644 drivers/pci/pci_auto.c create mode 100644 drivers/pci/pci_indirect.c create mode 100644 drivers/pci/tsi108_pci.c create mode 100644 drivers/pci/w83c553f.c (limited to 'drivers/pci') diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile new file mode 100644 index 0000000000..fe45839466 --- /dev/null +++ b/drivers/pci/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libpci.a + +COBJS-y += fsl_pci_init.o +COBJS-y += pci.o +COBJS-y += pci_auto.o +COBJS-y += pci_indirect.o +COBJS-y += tsi108_pci.o +COBJS-y += w83c553f.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c new file mode 100644 index 0000000000..1e778844a5 --- /dev/null +++ b/drivers/pci/fsl_pci_init.c @@ -0,0 +1,177 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#ifdef CONFIG_FSL_PCI_INIT + +/* + * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's + * + * Initialize controller and call the common driver/pci pci_hose_scan to + * scan for bridges and devices. + * + * Hose fields which need to be pre-initialized by board specific code: + * regions[] + * first_busno + * + * Fields updated: + * last_busno + */ + +#include +#include + +void pciauto_prescan_setup_bridge(struct pci_controller *hose, + pci_dev_t dev, int sub_bus); +void pciauto_postscan_setup_bridge(struct pci_controller *hose, + pci_dev_t dev, int sub_bus); + +void pciauto_config_init(struct pci_controller *hose); +void +fsl_pci_init(struct pci_controller *hose) +{ + u16 temp16; + u32 temp32; + int busno = hose->first_busno; + int enabled; + u16 ltssm; + u8 temp8; + int r; + int bridge; + int inbound = 0; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr; + pci_dev_t dev = PCI_BDF(busno,0,0); + + /* Initialize ATMU registers based on hose regions and flags */ + volatile pot_t *po=&pci->pot[1]; /* skip 0 */ + volatile pit_t *pi=&pci->pit[0]; /* ranges from: 3 to 1 */ + +#ifdef DEBUG + int neg_link_w; +#endif + + for (r=0; rregion_count; r++) { + if (hose->regions[r].flags & PCI_REGION_MEMORY) { /* inbound */ + pi->pitar = (hose->regions[r].bus_start >> 12) & 0x000fffff; + pi->piwbar = (hose->regions[r].phys_start >> 12) & 0x000fffff; + pi->piwbear = 0; + pi->piwar = PIWAR_EN | PIWAR_PF | PIWAR_LOCAL | + PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | + (__ilog2(hose->regions[r].size) - 1); + pi++; + inbound = hose->regions[r].size > 0; + } else { /* Outbound */ + po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff; + po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff; + po->potear = 0; + if (hose->regions[r].flags & PCI_REGION_IO) + po->powar = POWAR_EN | POWAR_IO_READ | POWAR_IO_WRITE | + (__ilog2(hose->regions[r].size) - 1); + else + po->powar = POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE | + (__ilog2(hose->regions[r].size) - 1); + po++; + } + } + + pci_register_hose(hose); + pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */ + hose->current_busno = hose->first_busno; + + pci->pedr = 0xffffffff; /* Clear any errors */ + pci->peer = ~0x20140; /* Enable All Error Interupts except + * - Master abort (pci) + * - Master PERR (pci) + * - ICCA (PCIe) + */ + pci_hose_read_config_dword (hose, dev, PCI_DCR, &temp32); + temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */ + pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32); + + pci_hose_read_config_byte (hose, dev, PCI_HEADER_TYPE, &temp8); + bridge = temp8 & PCI_HEADER_TYPE_BRIDGE; /* Bridge, such as pcie */ + + if ( bridge ) { + + pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); + enabled = ltssm >= PCI_LTSSM_L0; + + if (!enabled) { + debug("....PCIE link error. Skipping scan." + "LTSSM=0x%02x\n", ltssm); + hose->last_busno = hose->first_busno; + return; + } + + pci->pme_msg_det = 0xffffffff; + pci->pme_msg_int_en = 0xffffffff; +#ifdef DEBUG + pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16); + neg_link_w = (temp16 & 0x3f0 ) >> 4; + printf("...PCIE LTSSM=0x%x, Negotiated link width=%d\n", + ltssm, neg_link_w); +#endif + hose->current_busno++; /* Start scan with secondary */ + pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); + + } + + /* Use generic setup_device to initialize standard pci regs, + * but do not allocate any windows since any BAR found (such + * as PCSRBAR) is not in this cpu's memory space. + */ + + pciauto_setup_device(hose, dev, 0, hose->pci_mem, + hose->pci_prefetch, hose->pci_io); + + if (inbound) { + pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16); + pci_hose_write_config_word(hose, dev, PCI_COMMAND, + temp16 | PCI_COMMAND_MEMORY); + } + +#ifndef CONFIG_PCI_NOSCAN + printf (" Scanning PCI bus %02x\n", hose->current_busno); + hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno); + + if ( bridge ) { /* update limit regs and subordinate busno */ + pciauto_postscan_setup_bridge(hose, dev, hose->last_busno); + } +#else + hose->last_busno = hose->current_busno; +#endif + + /* Clear all error indications */ + + pci->pme_msg_det = 0xffffffff; + pci->pedr = 0xffffffff; + + pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16); + if (temp16) { + pci_hose_write_config_word(hose, dev, + PCI_DSR, 0xffff); + } + + pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16); + if (temp16) { + pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff); + } +} + +#endif /* CONFIG_FSL_PCI */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c new file mode 100644 index 0000000000..50ca6b0bad --- /dev/null +++ b/drivers/pci/pci.c @@ -0,0 +1,526 @@ +/* + * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH + * Andreas Heppel + * + * (C) Copyright 2002, 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * PCI routines + */ + +#include + +#ifdef CONFIG_PCI + +#include +#include +#include +#include + +#define PCI_HOSE_OP(rw, size, type) \ +int pci_hose_##rw##_config_##size(struct pci_controller *hose, \ + pci_dev_t dev, \ + int offset, type value) \ +{ \ + return hose->rw##_##size(hose, dev, offset, value); \ +} + +PCI_HOSE_OP(read, byte, u8 *) +PCI_HOSE_OP(read, word, u16 *) +PCI_HOSE_OP(read, dword, u32 *) +PCI_HOSE_OP(write, byte, u8) +PCI_HOSE_OP(write, word, u16) +PCI_HOSE_OP(write, dword, u32) + +#ifndef CONFIG_IXP425 +#define PCI_OP(rw, size, type, error_code) \ +int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value) \ +{ \ + struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev)); \ + \ + if (!hose) \ + { \ + error_code; \ + return -1; \ + } \ + \ + return pci_hose_##rw##_config_##size(hose, dev, offset, value); \ +} + +PCI_OP(read, byte, u8 *, *value = 0xff) +PCI_OP(read, word, u16 *, *value = 0xffff) +PCI_OP(read, dword, u32 *, *value = 0xffffffff) +PCI_OP(write, byte, u8, ) +PCI_OP(write, word, u16, ) +PCI_OP(write, dword, u32, ) +#endif /* CONFIG_IXP425 */ + +#define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \ +int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\ + pci_dev_t dev, \ + int offset, type val) \ +{ \ + u32 val32; \ + \ + if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \ + *val = -1; \ + return -1; \ + } \ + \ + *val = (val32 >> ((offset & (int)off_mask) * 8)); \ + \ + return 0; \ +} + +#define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \ +int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\ + pci_dev_t dev, \ + int offset, type val) \ +{ \ + u32 val32, mask, ldata, shift; \ + \ + if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ + return -1; \ + \ + shift = ((offset & (int)off_mask) * 8); \ + ldata = (((unsigned long)val) & val_mask) << shift; \ + mask = val_mask << shift; \ + val32 = (val32 & ~mask) | ldata; \ + \ + if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\ + return -1; \ + \ + return 0; \ +} + +PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03) +PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02) +PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff) +PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff) + +/* + * + */ + +static struct pci_controller* hose_head = NULL; + +void pci_register_hose(struct pci_controller* hose) +{ + struct pci_controller **phose = &hose_head; + + while(*phose) + phose = &(*phose)->next; + + hose->next = NULL; + + *phose = hose; +} + +struct pci_controller *pci_bus_to_hose (int bus) +{ + struct pci_controller *hose; + + for (hose = hose_head; hose; hose = hose->next) + if (bus >= hose->first_busno && bus <= hose->last_busno) + return hose; + + printf("pci_bus_to_hose() failed\n"); + return NULL; +} + +#ifndef CONFIG_IXP425 +pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) +{ + struct pci_controller * hose; + u16 vendor, device; + u8 header_type; + pci_dev_t bdf; + int i, bus, found_multi = 0; + + for (hose = hose_head; hose; hose = hose->next) + { +#ifdef CFG_SCSI_SCAN_BUS_REVERSE + for (bus = hose->last_busno; bus >= hose->first_busno; bus--) +#else + for (bus = hose->first_busno; bus <= hose->last_busno; bus++) +#endif + for (bdf = PCI_BDF(bus,0,0); +#if defined(CONFIG_ELPPC) || defined(CONFIG_PPMC7XX) + bdf < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); +#else + bdf < PCI_BDF(bus+1,0,0); +#endif + bdf += PCI_BDF(0,0,1)) + { + if (!PCI_FUNC(bdf)) { + pci_read_config_byte(bdf, + PCI_HEADER_TYPE, + &header_type); + + found_multi = header_type & 0x80; + } else { + if (!found_multi) + continue; + } + + pci_read_config_word(bdf, + PCI_VENDOR_ID, + &vendor); + pci_read_config_word(bdf, + PCI_DEVICE_ID, + &device); + + for (i=0; ids[i].vendor != 0; i++) + if (vendor == ids[i].vendor && + device == ids[i].device) + { + if (index <= 0) + return bdf; + + index--; + } + } + } + + return (-1); +} +#endif /* CONFIG_IXP425 */ + +pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index) +{ + static struct pci_device_id ids[2] = {{}, {0, 0}}; + + ids[0].vendor = vendor; + ids[0].device = device; + + return pci_find_devices(ids, index); +} + +/* + * + */ + +unsigned long pci_hose_phys_to_bus (struct pci_controller *hose, + unsigned long phys_addr, + unsigned long flags) +{ + struct pci_region *res; + unsigned long bus_addr; + int i; + + if (!hose) { + printf ("pci_hose_phys_to_bus: %s\n", "invalid hose"); + goto Done; + } + + for (i = 0; i < hose->region_count; i++) { + res = &hose->regions[i]; + + if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) + continue; + + bus_addr = phys_addr - res->phys_start + res->bus_start; + + if (bus_addr >= res->bus_start && + bus_addr < res->bus_start + res->size) { + return bus_addr; + } + } + + printf ("pci_hose_phys_to_bus: %s\n", "invalid physical address"); + +Done: + return 0; +} + +unsigned long pci_hose_bus_to_phys(struct pci_controller* hose, + unsigned long bus_addr, + unsigned long flags) +{ + struct pci_region *res; + int i; + + if (!hose) { + printf ("pci_hose_bus_to_phys: %s\n", "invalid hose"); + goto Done; + } + + for (i = 0; i < hose->region_count; i++) { + res = &hose->regions[i]; + + if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) + continue; + + if (bus_addr >= res->bus_start && + bus_addr < res->bus_start + res->size) { + return bus_addr - res->bus_start + res->phys_start; + } + } + + printf ("pci_hose_bus_to_phys: %s\n", "invalid physical address"); + +Done: + return 0; +} + +/* + * + */ + +int pci_hose_config_device(struct pci_controller *hose, + pci_dev_t dev, + unsigned long io, + unsigned long mem, + unsigned long command) +{ + unsigned int bar_response, bar_size, bar_value, old_command; + unsigned char pin; + int bar, found_mem64; + + debug ("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n", + io, mem, command); + + pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0); + + for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_5; bar += 4) { + pci_hose_write_config_dword (hose, dev, bar, 0xffffffff); + pci_hose_read_config_dword (hose, dev, bar, &bar_response); + + if (!bar_response) + continue; + + found_mem64 = 0; + + /* Check the BAR type and set our address mask */ + if (bar_response & PCI_BASE_ADDRESS_SPACE) { + bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1; + /* round up region base address to a multiple of size */ + io = ((io - 1) | (bar_size - 1)) + 1; + bar_value = io; + /* compute new region base address */ + io = io + bar_size; + } else { + if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == + PCI_BASE_ADDRESS_MEM_TYPE_64) + found_mem64 = 1; + + bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1; + + /* round up region base address to multiple of size */ + mem = ((mem - 1) | (bar_size - 1)) + 1; + bar_value = mem; + /* compute new region base address */ + mem = mem + bar_size; + } + + /* Write it out and update our limit */ + pci_hose_write_config_dword (hose, dev, bar, bar_value); + + if (found_mem64) { + bar += 4; + pci_hose_write_config_dword (hose, dev, bar, 0x00000000); + } + } + + /* Configure Cache Line Size Register */ + pci_hose_write_config_byte (hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* Configure Latency Timer */ + pci_hose_write_config_byte (hose, dev, PCI_LATENCY_TIMER, 0x80); + + /* Disable interrupt line, if device says it wants to use interrupts */ + pci_hose_read_config_byte (hose, dev, PCI_INTERRUPT_PIN, &pin); + if (pin != 0) { + pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, 0xff); + } + + pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &old_command); + pci_hose_write_config_dword (hose, dev, PCI_COMMAND, + (old_command & 0xffff0000) | command); + + return 0; +} + +/* + * + */ + +struct pci_config_table *pci_find_config(struct pci_controller *hose, + unsigned short class, + unsigned int vendor, + unsigned int device, + unsigned int bus, + unsigned int dev, + unsigned int func) +{ + struct pci_config_table *table; + + for (table = hose->config_table; table && table->vendor; table++) { + if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) && + (table->device == PCI_ANY_ID || table->device == device) && + (table->class == PCI_ANY_ID || table->class == class) && + (table->bus == PCI_ANY_ID || table->bus == bus) && + (table->dev == PCI_ANY_ID || table->dev == dev) && + (table->func == PCI_ANY_ID || table->func == func)) { + return table; + } + } + + return NULL; +} + +void pci_cfgfunc_config_device(struct pci_controller *hose, + pci_dev_t dev, + struct pci_config_table *entry) +{ + pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1], entry->priv[2]); +} + +void pci_cfgfunc_do_nothing(struct pci_controller *hose, + pci_dev_t dev, struct pci_config_table *entry) +{ +} + +/* + * + */ + +/* HJF: Changed this to return int. I think this is required + * to get the correct result when scanning bridges + */ +extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); +extern void pciauto_config_init(struct pci_controller *hose); + +int pci_hose_scan_bus(struct pci_controller *hose, int bus) +{ + unsigned int sub_bus, found_multi=0; + unsigned short vendor, device, class; + unsigned char header_type; + struct pci_config_table *cfg; + pci_dev_t dev; + + sub_bus = bus; + + for (dev = PCI_BDF(bus,0,0); + dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); + dev += PCI_BDF(0,0,1)) + { + /* Skip our host bridge */ + if ( dev == PCI_BDF(hose->first_busno,0,0) ) { +#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */ + /* + * Only skip hostbridge configuration if "pciconfighost" is not set + */ + if (getenv("pciconfighost") == NULL) { + continue; /* Skip our host bridge */ + } +#else + continue; /* Skip our host bridge */ +#endif + } + + if (PCI_FUNC(dev) && !found_multi) + continue; + + pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); + + pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor); + + if (vendor != 0xffff && vendor != 0x0000) { + + if (!PCI_FUNC(dev)) + found_multi = header_type & 0x80; + + debug ("PCI Scan: Found Bus %d, Device %d, Function %d\n", + PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) ); + + pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device); + pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); + + cfg = pci_find_config(hose, class, vendor, device, + PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); + if (cfg) { + cfg->config_device(hose, dev, cfg); + sub_bus = max(sub_bus, hose->current_busno); +#ifdef CONFIG_PCI_PNP + } else { + int n = pciauto_config_device(hose, dev); + + sub_bus = max(sub_bus, n); +#endif + } + if (hose->fixup_irq) + hose->fixup_irq(hose, dev); + +#ifdef CONFIG_PCI_SCAN_SHOW + /* Skip our host bridge */ + if ( dev != PCI_BDF(hose->first_busno,0,0) ) { + unsigned char int_line; + + pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE, + &int_line); + printf(" %02x %02x %04x %04x %04x %02x\n", + PCI_BUS(dev), PCI_DEV(dev), vendor, device, class, + int_line); + } +#endif + } + } + + return sub_bus; +} + +int pci_hose_scan(struct pci_controller *hose) +{ + /* Start scan at current_busno. + * PCIe will start scan at first_busno+1. + */ + /* For legacy support, ensure current>=first */ + if (hose->first_busno > hose->current_busno) + hose->current_busno = hose->first_busno; +#ifdef CONFIG_PCI_PNP + pciauto_config_init(hose); +#endif + return pci_hose_scan_bus(hose, hose->current_busno); +} + +void pci_init(void) +{ +#if defined(CONFIG_PCI_BOOTDELAY) + char *s; + int i; + + /* wait "pcidelay" ms (if defined)... */ + s = getenv ("pcidelay"); + if (s) { + int val = simple_strtoul (s, NULL, 10); + for (i=0; i + * + * Copyright 2000 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include + +#ifdef CONFIG_PCI + +#include + +#undef DEBUG +#ifdef DEBUG +#define DEBUGF(x...) printf(x) +#else +#define DEBUGF(x...) +#endif /* DEBUG */ + +#define PCIAUTO_IDE_MODE_MASK 0x05 + +/* the user can define CFG_PCI_CACHE_LINE_SIZE to avoid problems */ +#ifndef CFG_PCI_CACHE_LINE_SIZE +#define CFG_PCI_CACHE_LINE_SIZE 8 +#endif + +/* + * + */ + +void pciauto_region_init(struct pci_region* res) +{ + /* + * Avoid allocating PCI resources from address 0 -- this is illegal + * according to PCI 2.1 and moreover, this is known to cause Linux IDE + * drivers to fail. Use a reasonable starting value of 0x1000 instead. + */ + res->bus_lower = res->bus_start ? res->bus_start : 0x1000; +} + +void pciauto_region_align(struct pci_region *res, unsigned long size) +{ + res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1; +} + +int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar) +{ + unsigned long addr; + + if (!res) { + DEBUGF("No resource"); + goto error; + } + + addr = ((res->bus_lower - 1) | (size - 1)) + 1; + + if (addr - res->bus_start + size > res->size) { + DEBUGF("No room in resource"); + goto error; + } + + res->bus_lower = addr + size; + + DEBUGF("address=0x%lx bus_lower=%x", addr, res->bus_lower); + + *bar = addr; + return 0; + + error: + *bar = 0xffffffff; + return -1; +} + +/* + * + */ + +void pciauto_setup_device(struct pci_controller *hose, + pci_dev_t dev, int bars_num, + struct pci_region *mem, + struct pci_region *prefetch, + struct pci_region *io) +{ + unsigned int bar_value, bar_response, bar_size; + unsigned int cmdstat = 0; + struct pci_region *bar_res; + int bar, bar_nr = 0; + int found_mem64 = 0; + + pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat); + cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER; + + for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) { + /* Tickle the BAR and get the response */ + pci_hose_write_config_dword(hose, dev, bar, 0xffffffff); + pci_hose_read_config_dword(hose, dev, bar, &bar_response); + + /* If BAR is not implemented go to the next BAR */ + if (!bar_response) + continue; + + found_mem64 = 0; + + /* Check the BAR type and set our address mask */ + if (bar_response & PCI_BASE_ADDRESS_SPACE) { + bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK)) + & 0xffff) + 1; + bar_res = io; + + DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size); + } else { + if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == + PCI_BASE_ADDRESS_MEM_TYPE_64) + found_mem64 = 1; + + bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1; + if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH)) + bar_res = prefetch; + else + bar_res = mem; + + DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size); + } + + if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) { + /* Write it out and update our limit */ + pci_hose_write_config_dword(hose, dev, bar, bar_value); + + /* + * If we are a 64-bit decoder then increment to the + * upper 32 bits of the bar and force it to locate + * in the lower 4GB of memory. + */ + if (found_mem64) { + bar += 4; + pci_hose_write_config_dword(hose, dev, bar, 0x00000000); + } + + cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ? + PCI_COMMAND_IO : PCI_COMMAND_MEMORY; + } + + DEBUGF("\n"); + + bar_nr++; + } + + pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, + CFG_PCI_CACHE_LINE_SIZE); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); +} + +void pciauto_prescan_setup_bridge(struct pci_controller *hose, + pci_dev_t dev, int sub_bus) +{ + struct pci_region *pci_mem = hose->pci_mem; + struct pci_region *pci_prefetch = hose->pci_prefetch; + struct pci_region *pci_io = hose->pci_io; + unsigned int cmdstat; + + pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat); + + /* Configure bus number registers */ + pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, + PCI_BUS(dev) - hose->first_busno); + pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, + sub_bus - hose->first_busno); + pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff); + + if (pci_mem) { + /* Round memory allocator to 1MB boundary */ + pciauto_region_align(pci_mem, 0x100000); + + /* Set up memory and I/O filter limits, assume 32-bit I/O space */ + pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE, + (pci_mem->bus_lower & 0xfff00000) >> 16); + + cmdstat |= PCI_COMMAND_MEMORY; + } + + if (pci_prefetch) { + /* Round memory allocator to 1MB boundary */ + pciauto_region_align(pci_prefetch, 0x100000); + + /* Set up memory and I/O filter limits, assume 32-bit I/O space */ + pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, + (pci_prefetch->bus_lower & 0xfff00000) >> 16); + + cmdstat |= PCI_COMMAND_MEMORY; + } else { + /* We don't support prefetchable memory for now, so disable */ + pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000); + pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0); + } + + if (pci_io) { + /* Round I/O allocator to 4KB boundary */ + pciauto_region_align(pci_io, 0x1000); + + pci_hose_write_config_byte(hose, dev, PCI_IO_BASE, + (pci_io->bus_lower & 0x0000f000) >> 8); + pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16, + (pci_io->bus_lower & 0xffff0000) >> 16); + + cmdstat |= PCI_COMMAND_IO; + } + + /* Enable memory and I/O accesses, enable bus master */ + pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER); +} + +void pciauto_postscan_setup_bridge(struct pci_controller *hose, + pci_dev_t dev, int sub_bus) +{ + struct pci_region *pci_mem = hose->pci_mem; + struct pci_region *pci_prefetch = hose->pci_prefetch; + struct pci_region *pci_io = hose->pci_io; + + /* Configure bus number registers */ + pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, + sub_bus - hose->first_busno); + + if (pci_mem) { + /* Round memory allocator to 1MB boundary */ + pciauto_region_align(pci_mem, 0x100000); + + pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT, + (pci_mem->bus_lower-1) >> 16); + } + + if (pci_prefetch) { + /* Round memory allocator to 1MB boundary */ + pciauto_region_align(pci_prefetch, 0x100000); + + pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, + (pci_prefetch->bus_lower-1) >> 16); + } + + if (pci_io) { + /* Round I/O allocator to 4KB boundary */ + pciauto_region_align(pci_io, 0x1000); + + pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT, + ((pci_io->bus_lower-1) & 0x0000f000) >> 8); + pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16, + ((pci_io->bus_lower-1) & 0xffff0000) >> 16); + } +} + +/* + * + */ + +void pciauto_config_init(struct pci_controller *hose) +{ + int i; + + hose->pci_io = hose->pci_mem = NULL; + + for (i=0; iregion_count; i++) { + switch(hose->regions[i].flags) { + case PCI_REGION_IO: + if (!hose->pci_io || + hose->pci_io->size < hose->regions[i].size) + hose->pci_io = hose->regions + i; + break; + case PCI_REGION_MEM: + if (!hose->pci_mem || + hose->pci_mem->size < hose->regions[i].size) + hose->pci_mem = hose->regions + i; + break; + case (PCI_REGION_MEM | PCI_REGION_PREFETCH): + if (!hose->pci_prefetch || + hose->pci_prefetch->size < hose->regions[i].size) + hose->pci_prefetch = hose->regions + i; + break; + } + } + + + if (hose->pci_mem) { + pciauto_region_init(hose->pci_mem); + + DEBUGF("PCI Autoconfig: Bus Memory region: [%lx-%lx],\n" + "\t\tPhysical Memory [%x-%x]\n", + hose->pci_mem->bus_start, + hose->pci_mem->bus_start + hose->pci_mem->size - 1, + hose->pci_mem->phys_start, + hose->pci_mem->phys_start + hose->pci_mem->size - 1); + } + + if (hose->pci_prefetch) { + pciauto_region_init(hose->pci_prefetch); + + DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [%lx-%lx],\n" + "\t\tPhysical Memory [%x-%x]\n", + hose->pci_prefetch->bus_start, + hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1, + hose->pci_prefetch->phys_start, + hose->pci_prefetch->phys_start + + hose->pci_prefetch->size - 1); + } + + if (hose->pci_io) { + pciauto_region_init(hose->pci_io); + + DEBUGF("PCI Autoconfig: Bus I/O region: [%lx-%lx],\n" + "\t\tPhysical Memory: [%x-%x]\n", + hose->pci_io->bus_start, + hose->pci_io->bus_start + hose->pci_io->size - 1, + hose->pci_io->phys_start, + hose->pci_io->phys_start + hose->pci_io->size - 1); + + } +} + +/* HJF: Changed this to return int. I think this is required + * to get the correct result when scanning bridges + */ +int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) +{ + unsigned int sub_bus = PCI_BUS(dev); + unsigned short class; + unsigned char prg_iface; + int n; + + pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); + + switch(class) { + case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */ + DEBUGF("PCI AutoConfig: Found PowerPC device\n"); + pciauto_setup_device(hose, dev, 6, hose->pci_mem, + hose->pci_prefetch, hose->pci_io); + break; + + case PCI_CLASS_BRIDGE_PCI: + hose->current_busno++; + pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + + DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev)); + + /* Passing in current_busno allows for sibling P2P bridges */ + pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); + /* + * need to figure out if this is a subordinate bridge on the bus + * to be able to properly set the pri/sec/sub bridge registers. + */ + n = pci_hose_scan_bus(hose, hose->current_busno); + + /* figure out the deepest we've gone for this leg */ + sub_bus = max(n, sub_bus); + pciauto_postscan_setup_bridge(hose, dev, sub_bus); + + sub_bus = hose->current_busno; + break; + + case PCI_CLASS_STORAGE_IDE: + pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface); + if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) { + DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n"); + return sub_bus; + } + + pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + break; + + case PCI_CLASS_BRIDGE_CARDBUS: + /* just do a minimal setup of the bridge, let the OS take care of the rest */ + pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + + DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev)); + + hose->current_busno++; + break; + +#ifdef CONFIG_MPC5200 + case PCI_CLASS_BRIDGE_OTHER: + DEBUGF("PCI Autoconfig: Skipping bridge device %d\n", + PCI_DEV(dev)); + break; +#endif +#ifdef CONFIG_MPC834X + case PCI_CLASS_BRIDGE_OTHER: + /* + * The host/PCI bridge 1 seems broken in 8349 - it presents + * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_ + * device claiming resources io/mem/irq.. we only allow for + * the PIMMR window to be allocated (BAR0 - 1MB size) + */ + DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n"); + pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + break; +#endif + default: + pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + break; + } + + return sub_bus; +} + +#endif /* CONFIG_PCI */ diff --git a/drivers/pci/pci_indirect.c b/drivers/pci/pci_indirect.c new file mode 100644 index 0000000000..a8220fb411 --- /dev/null +++ b/drivers/pci/pci_indirect.c @@ -0,0 +1,138 @@ +/* + * Support for indirect PCI bridges. + * + * Copyright (C) 1998 Gabriel Paubert. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#ifdef CONFIG_PCI +#if (!defined(__I386__) && !defined(CONFIG_IXDP425)) + +#include +#include +#include + +#define cfg_read(val, addr, type, op) *val = op((type)(addr)) +#define cfg_write(val, addr, type, op) op((type *)(addr), (val)) + +#ifdef CONFIG_IXP425 +extern unsigned char in_8 (volatile unsigned *addr); +extern unsigned short in_le16 (volatile unsigned *addr); +extern unsigned in_le32 (volatile unsigned *addr); +extern void out_8 (volatile unsigned *addr, char val); +extern void out_le16 (volatile unsigned *addr, unsigned short val); +extern void out_le32 (volatile unsigned *addr, unsigned int val); +#endif /* CONFIG_IXP425 */ + +#if defined(CONFIG_MPC8260) +#define INDIRECT_PCI_OP(rw, size, type, op, mask) \ +static int \ +indirect_##rw##_config_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, type val) \ +{ \ + u32 b, d,f; \ + b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev); \ + b = b - hose->first_busno; \ + dev = PCI_BDF(b, d, f); \ + out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \ + sync(); \ + cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ + return 0; \ +} +#elif defined(CONFIG_E500) || defined(CONFIG_MPC86xx) +#define INDIRECT_PCI_OP(rw, size, type, op, mask) \ +static int \ +indirect_##rw##_config_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, type val) \ +{ \ + u32 b, d,f; \ + b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev); \ + b = b - hose->first_busno; \ + dev = PCI_BDF(b, d, f); \ + *(hose->cfg_addr) = dev | (offset & 0xfc) | ((offset & 0xf00) << 16) | 0x80000000; \ + sync(); \ + cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ + return 0; \ +} +#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE) +#define INDIRECT_PCI_OP(rw, size, type, op, mask) \ +static int \ +indirect_##rw##_config_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, type val) \ +{ \ + u32 b, d,f; \ + b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev); \ + b = b - hose->first_busno; \ + dev = PCI_BDF(b, d, f); \ + if (PCI_BUS(dev) > 0) \ + out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000001); \ + else \ + out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \ + cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ + return 0; \ +} +#else +#define INDIRECT_PCI_OP(rw, size, type, op, mask) \ +static int \ +indirect_##rw##_config_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, type val) \ +{ \ + u32 b, d,f; \ + b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev); \ + b = b - hose->first_busno; \ + dev = PCI_BDF(b, d, f); \ + out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \ + cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ + return 0; \ +} +#endif + +#define INDIRECT_PCI_OP_ERRATA6(rw, size, type, op, mask) \ +static int \ +indirect_##rw##_config_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, type val) \ +{ \ + unsigned int msr = mfmsr(); \ + mtmsr(msr & ~(MSR_EE | MSR_CE)); \ + out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \ + cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ + out_le32(hose->cfg_addr, 0x00000000); \ + mtmsr(msr); \ + return 0; \ +} + +INDIRECT_PCI_OP(read, byte, u8 *, in_8, 3) +INDIRECT_PCI_OP(read, word, u16 *, in_le16, 2) +INDIRECT_PCI_OP(read, dword, u32 *, in_le32, 0) +#ifdef CONFIG_405GP +INDIRECT_PCI_OP_ERRATA6(write, byte, u8, out_8, 3) +INDIRECT_PCI_OP_ERRATA6(write, word, u16, out_le16, 2) +INDIRECT_PCI_OP_ERRATA6(write, dword, u32, out_le32, 0) +#else +INDIRECT_PCI_OP(write, byte, u8, out_8, 3) +INDIRECT_PCI_OP(write, word, u16, out_le16, 2) +INDIRECT_PCI_OP(write, dword, u32, out_le32, 0) +#endif + +void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data) +{ + pci_set_ops(hose, + indirect_read_config_byte, + indirect_read_config_word, + indirect_read_config_dword, + indirect_write_config_byte, + indirect_write_config_word, + indirect_write_config_dword); + + hose->cfg_addr = (unsigned int *) cfg_addr; + hose->cfg_data = (unsigned char *) cfg_data; +} + +#endif /* !__I386__ && !CONFIG_IXDP425 */ +#endif /* CONFIG_PCI */ diff --git a/drivers/pci/tsi108_pci.c b/drivers/pci/tsi108_pci.c new file mode 100644 index 0000000000..d5f11e42f0 --- /dev/null +++ b/drivers/pci/tsi108_pci.c @@ -0,0 +1,181 @@ +/* + * (C) Copyright 2004 Tundra Semiconductor Corp. + * Alex Bounine + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * PCI initialisation for the Tsi108 EMU board. + */ + +#include + +#ifdef CONFIG_TSI108_PCI + +#include +#include +#include +#include +#ifdef CONFIG_OF_FLAT_TREE +#include +#endif + +struct pci_controller local_hose; + +void tsi108_clear_pci_error (void) +{ + u32 err_stat, err_addr, pci_stat; + + /* + * Quietly clear errors signalled as result of PCI/X configuration read + * requests. + */ + /* Read PB Error Log Registers */ + err_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE + + TSI108_PB_REG_OFFSET + PB_ERRCS); + err_addr = *(volatile u32 *)(CFG_TSI108_CSR_BASE + + TSI108_PB_REG_OFFSET + PB_AERR); + if (err_stat & PB_ERRCS_ES) { + /* Clear PCI/X bus errors if applicable */ + if ((err_addr & 0xFF000000) == CFG_PCI_CFG_BASE) { + /* Clear error flag */ + *(u32 *) (CFG_TSI108_CSR_BASE + + TSI108_PB_REG_OFFSET + PB_ERRCS) = + PB_ERRCS_ES; + + /* Clear read error reported in PB_ISR */ + *(u32 *) (CFG_TSI108_CSR_BASE + + TSI108_PB_REG_OFFSET + PB_ISR) = + PB_ISR_PBS_RD_ERR; + + /* Clear errors reported by PCI CSR (Normally Master Abort) */ + pci_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + + PCI_CSR); + *(volatile u32 *)(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + PCI_CSR) = + pci_stat; + + *(volatile u32 *)(CFG_TSI108_CSR_BASE + + TSI108_PCI_REG_OFFSET + + PCI_IRP_STAT) = PCI_IRP_STAT_P_CSR; + } + } + + return; +} + +unsigned int __get_pci_config_dword (u32 addr) +{ + unsigned int retval; + + __asm__ __volatile__ (" lwbrx %0,0,%1\n" + "1: eieio\n" + "2:\n" + ".section .fixup,\"ax\"\n" + "3: li %0,-1\n" + " b 2b\n" + ".section __ex_table,\"a\"\n" + " .align 2\n" + " .long 1b,3b\n" + ".text":"=r"(retval):"r"(addr)); + + return (retval); +} + +static int tsi108_read_config_dword (struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + dev &= (CFG_PCI_CFG_SIZE - 1); + dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc)); + *value = __get_pci_config_dword(dev); + if (0xFFFFFFFF == *value) + tsi108_clear_pci_error (); + return 0; +} + +static int tsi108_write_config_dword (struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value) +{ + dev &= (CFG_PCI_CFG_SIZE - 1); + dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc)); + + out_le32 ((volatile unsigned *)dev, value); + + return 0; +} + +void pci_init_board (void) +{ + struct pci_controller *hose = (struct pci_controller *)&local_hose; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + pci_set_region (hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* PCI memory space */ + pci_set_region (hose->regions + 1, + CFG_PCI_MEM_BUS, + CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM); + + /* PCI I/O space */ + pci_set_region (hose->regions + 2, + CFG_PCI_IO_BUS, + CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); + + hose->region_count = 3; + + pci_set_ops (hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + tsi108_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + tsi108_write_config_dword); + + pci_register_hose (hose); + + hose->last_busno = pci_hose_scan (hose); + + debug ("Done PCI initialization\n"); + return; +} + +#ifdef CONFIG_OF_FLAT_TREE +void +ft_pci_setup (void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop (blob, "/" OF_TSI "/pci@1000/bus-range", &len); + if (p != NULL) { + p[0] = local_hose.first_busno; + p[1] = local_hose.last_busno; + } + +} +#endif + +#endif /* CONFIG_TSI108_PCI */ diff --git a/drivers/pci/w83c553f.c b/drivers/pci/w83c553f.c new file mode 100644 index 0000000000..5d82ed4dd4 --- /dev/null +++ b/drivers/pci/w83c553f.c @@ -0,0 +1,226 @@ +/* + * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH + * Andreas Heppel + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Initialisation of the PCI-to-ISA bridge and disabling the BIOS + * write protection (for flash) in function 0 of the chip. + * Enabling function 1 (IDE controller of the chip. + */ + +#include +#include + +#ifdef CFG_WINBOND_83C553 + +#include +#include + +#include + +#define out8(addr,val) do { \ + out_8((u8*) (addr),(val)); udelay(1); \ + } while (0) +#define out16(addr,val) do { \ + out_be16((u16*) (addr),(val)); udelay(1); \ + } while (0) + +extern uint ide_bus_offset[CFG_IDE_MAXBUS]; + +void initialise_pic(void); +void initialise_dma(void); + +void initialise_w83c553f(void) +{ + pci_dev_t devbusfn; + unsigned char reg8; + unsigned short reg16; + unsigned int reg32; + + devbusfn = pci_find_device(W83C553F_VID, W83C553F_DID, 0); + if (devbusfn == -1) + { + printf("Error: Cannot find W83C553F controller on any PCI bus."); + return; + } + + pci_read_config_word(devbusfn, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + pci_write_config_word(devbusfn, PCI_COMMAND, reg16); + + pci_read_config_byte(devbusfn, WINBOND_IPADCR, ®8); + /* 16 MB ISA memory space */ + reg8 |= (IPADCR_IPATOM4 | IPADCR_IPATOM5 | IPADCR_IPATOM6 | IPADCR_IPATOM7); + reg8 &= ~IPADCR_MBE512; + pci_write_config_byte(devbusfn, WINBOND_IPADCR, reg8); + + pci_read_config_byte(devbusfn, WINBOND_CSCR, ®8); + /* switch off BIOS write protection */ + reg8 |= CSCR_UBIOSCSE; + reg8 &= ~CSCR_BIOSWP; + pci_write_config_byte(devbusfn, WINBOND_CSCR, reg8); + + /* + * Interrupt routing: + * - IDE -> IRQ 9/0 + * - INTA -> IRQ 10 + * - INTB -> IRQ 11 + * - INTC -> IRQ 14 + * - INTD -> IRQ 15 + */ + pci_write_config_byte(devbusfn, WINBOND_IDEIRCR, 0x90); + pci_write_config_word(devbusfn, WINBOND_PCIIRCR, 0xABEF); + + /* + * Read IDE bus offsets from function 1 device. + * We must unmask the LSB indicating that ist is an IO address. + */ + devbusfn |= PCI_BDF(0,0,1); + + /* + * Switch off legacy IRQ for IDE and IDE port 1. + */ + pci_write_config_byte(devbusfn, 0x09, 0x8F); + + pci_read_config_dword(devbusfn, WINDOND_IDECSR, ®32); + reg32 &= ~(IDECSR_LEGIRQ | IDECSR_P1EN | IDECSR_P1F16); + pci_write_config_dword(devbusfn, WINDOND_IDECSR, reg32); + + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]); + ide_bus_offset[0] &= ~1; +#if CFG_IDE_MAXBUS > 1 + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]); + ide_bus_offset[1] &= ~1; +#endif + + /* + * Enable function 1, IDE -> busmastering and IO space access + */ + pci_read_config_word(devbusfn, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO; + pci_write_config_word(devbusfn, PCI_COMMAND, reg16); + + /* + * Initialise ISA interrupt controller + */ + initialise_pic(); + + /* + * Initialise DMA controller + */ + initialise_dma(); +} + +void initialise_pic(void) +{ + out8(W83C553F_PIC1_ICW1, 0x11); + out8(W83C553F_PIC1_ICW2, 0x08); + out8(W83C553F_PIC1_ICW3, 0x04); + out8(W83C553F_PIC1_ICW4, 0x01); + out8(W83C553F_PIC1_OCW1, 0xfb); + out8(W83C553F_PIC1_ELC, 0x20); + + out8(W83C553F_PIC2_ICW1, 0x11); + out8(W83C553F_PIC2_ICW2, 0x08); + out8(W83C553F_PIC2_ICW3, 0x02); + out8(W83C553F_PIC2_ICW4, 0x01); + out8(W83C553F_PIC2_OCW1, 0xff); + out8(W83C553F_PIC2_ELC, 0xce); + + out8(W83C553F_TMR1_CMOD, 0x74); + + out8(W83C553F_PIC2_OCW1, 0x20); + out8(W83C553F_PIC1_OCW1, 0x20); + + out8(W83C553F_PIC2_OCW1, 0x2b); + out8(W83C553F_PIC1_OCW1, 0x2b); +} + +void initialise_dma(void) +{ + unsigned int channel; + unsigned int rvalue1, rvalue2; + + /* perform a H/W reset of the devices */ + + out8(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00); + out16(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000); + + /* initialise all channels to a sane state */ + + for (channel = 0; channel < 4; channel++) { + /* + * dependent upon the channel, setup the specifics: + * + * demand + * address-increment + * autoinitialize-disable + * verify-transfer + */ + + switch (channel) { + case 0: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL); + break; + case 1: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); + break; + case 2: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); + break; + case 3: + rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); + rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); + break; + default: + rvalue1 = 0x00; + rvalue2 = 0x00; + break; + } + + /* write to write mode registers */ + + out8(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF); + out16(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF); + } + + /* enable all channels */ + + out8(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00); + out16(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000); + /* + * initialize the global DMA configuration + * + * DACK# active low + * DREQ active high + * fixed priority + * channel group enable + */ + + out8(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00); + out16(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000); +} + +#endif /* CFG_WINBOND_83C553 */ -- cgit v1.2.1