From 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 20 Nov 2007 20:28:09 +0100 Subject: drivers/pci : move pci drivers to drivers/pci Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/pci/fsl_pci_init.c | 177 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 drivers/pci/fsl_pci_init.c (limited to 'drivers/pci/fsl_pci_init.c') diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c new file mode 100644 index 0000000000..1e778844a5 --- /dev/null +++ b/drivers/pci/fsl_pci_init.c @@ -0,0 +1,177 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#ifdef CONFIG_FSL_PCI_INIT + +/* + * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's + * + * Initialize controller and call the common driver/pci pci_hose_scan to + * scan for bridges and devices. + * + * Hose fields which need to be pre-initialized by board specific code: + * regions[] + * first_busno + * + * Fields updated: + * last_busno + */ + +#include +#include + +void pciauto_prescan_setup_bridge(struct pci_controller *hose, + pci_dev_t dev, int sub_bus); +void pciauto_postscan_setup_bridge(struct pci_controller *hose, + pci_dev_t dev, int sub_bus); + +void pciauto_config_init(struct pci_controller *hose); +void +fsl_pci_init(struct pci_controller *hose) +{ + u16 temp16; + u32 temp32; + int busno = hose->first_busno; + int enabled; + u16 ltssm; + u8 temp8; + int r; + int bridge; + int inbound = 0; + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr; + pci_dev_t dev = PCI_BDF(busno,0,0); + + /* Initialize ATMU registers based on hose regions and flags */ + volatile pot_t *po=&pci->pot[1]; /* skip 0 */ + volatile pit_t *pi=&pci->pit[0]; /* ranges from: 3 to 1 */ + +#ifdef DEBUG + int neg_link_w; +#endif + + for (r=0; rregion_count; r++) { + if (hose->regions[r].flags & PCI_REGION_MEMORY) { /* inbound */ + pi->pitar = (hose->regions[r].bus_start >> 12) & 0x000fffff; + pi->piwbar = (hose->regions[r].phys_start >> 12) & 0x000fffff; + pi->piwbear = 0; + pi->piwar = PIWAR_EN | PIWAR_PF | PIWAR_LOCAL | + PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | + (__ilog2(hose->regions[r].size) - 1); + pi++; + inbound = hose->regions[r].size > 0; + } else { /* Outbound */ + po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff; + po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff; + po->potear = 0; + if (hose->regions[r].flags & PCI_REGION_IO) + po->powar = POWAR_EN | POWAR_IO_READ | POWAR_IO_WRITE | + (__ilog2(hose->regions[r].size) - 1); + else + po->powar = POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE | + (__ilog2(hose->regions[r].size) - 1); + po++; + } + } + + pci_register_hose(hose); + pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */ + hose->current_busno = hose->first_busno; + + pci->pedr = 0xffffffff; /* Clear any errors */ + pci->peer = ~0x20140; /* Enable All Error Interupts except + * - Master abort (pci) + * - Master PERR (pci) + * - ICCA (PCIe) + */ + pci_hose_read_config_dword (hose, dev, PCI_DCR, &temp32); + temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */ + pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32); + + pci_hose_read_config_byte (hose, dev, PCI_HEADER_TYPE, &temp8); + bridge = temp8 & PCI_HEADER_TYPE_BRIDGE; /* Bridge, such as pcie */ + + if ( bridge ) { + + pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); + enabled = ltssm >= PCI_LTSSM_L0; + + if (!enabled) { + debug("....PCIE link error. Skipping scan." + "LTSSM=0x%02x\n", ltssm); + hose->last_busno = hose->first_busno; + return; + } + + pci->pme_msg_det = 0xffffffff; + pci->pme_msg_int_en = 0xffffffff; +#ifdef DEBUG + pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16); + neg_link_w = (temp16 & 0x3f0 ) >> 4; + printf("...PCIE LTSSM=0x%x, Negotiated link width=%d\n", + ltssm, neg_link_w); +#endif + hose->current_busno++; /* Start scan with secondary */ + pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); + + } + + /* Use generic setup_device to initialize standard pci regs, + * but do not allocate any windows since any BAR found (such + * as PCSRBAR) is not in this cpu's memory space. + */ + + pciauto_setup_device(hose, dev, 0, hose->pci_mem, + hose->pci_prefetch, hose->pci_io); + + if (inbound) { + pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16); + pci_hose_write_config_word(hose, dev, PCI_COMMAND, + temp16 | PCI_COMMAND_MEMORY); + } + +#ifndef CONFIG_PCI_NOSCAN + printf (" Scanning PCI bus %02x\n", hose->current_busno); + hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno); + + if ( bridge ) { /* update limit regs and subordinate busno */ + pciauto_postscan_setup_bridge(hose, dev, hose->last_busno); + } +#else + hose->last_busno = hose->current_busno; +#endif + + /* Clear all error indications */ + + pci->pme_msg_det = 0xffffffff; + pci->pedr = 0xffffffff; + + pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16); + if (temp16) { + pci_hose_write_config_word(hose, dev, + PCI_DSR, 0xffff); + } + + pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16); + if (temp16) { + pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff); + } +} + +#endif /* CONFIG_FSL_PCI */ -- cgit v1.2.1