From 7152b1d0b3f8beec8c297d64664e41b4c4ef610a Mon Sep 17 00:00:00 2001 From: wdenk Date: Fri, 5 Sep 2003 23:19:14 +0000 Subject: * Add support for SK98xx driver * Add PCI support for SL8245 board * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB) or 1 x AM29LV652 (two LV065 in one chip = 16 MB); Run IPB at 133 Mhz; adjust the MII clock frequency accordingly * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz) to allow for more accurate baudrate settings (error now 0.7% at 115 kbps, instead of 3.5% before) * Patch by Andreas Mohr, 4 Sep 2003: Fix a lot of spelling errors --- doc/README.POST | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'doc') diff --git a/doc/README.POST b/doc/README.POST index fba498a3a5..a81e07926d 100644 --- a/doc/README.POST +++ b/doc/README.POST @@ -5,7 +5,7 @@ This project is to support Power-On-Self-Test (POST) in U-Boot. 1. High-level requirements -The key rquirements for this project are as follows: +The key requirements for this project are as follows: 1) The project shall develop a flexible framework for implementing and running Power-On-Self-Test in U-Boot. This framework shall @@ -72,7 +72,7 @@ tests. All POST tests will be divided into the following groups: This group will contain those tests that do not take much time and can be run on the regular basis (e.g. CPU test) - 3) Tests running on in special "slow test more" only + 3) Tests running in special "slow test mode" only This group will contain POST tests that consume much time and cannot be run regularly (e.g. strong memory test, I2C test) @@ -92,7 +92,7 @@ Specifically, the following groups will be singled out: 1) Tests running before relocating to RAM - These tests will run immediatelly after initializing RAM + These tests will run immediately after initializing RAM as to enable modifying it without taking care of its contents. Basically, this group will contain memory tests only. -- cgit v1.2.1